COMMUNICATIONS COMPONENTS 2.5 Gb/s Bias-Ready Modulator Butterfly Package Key Features • Designed to work with bias control circuits • Small-outline package • 1530 to 1565 nm operation; L-band versions available • Low drive voltage; compatible with commercial drivers • Low chirp for maximum transmission distance (>1000 km) Applications • Medium- and long-haul transmission • DWDM and TDM transmission Compliance • Telcordia 468 NORTH AMERICA : 800 498-JDSU (5378) The 2.5 Gb/s bias-ready modulator is a digital device in which the bias point of the interferometer is set using an applied voltage, typically with a control loop, to operate at the half-intensity point (quadrature). This design uses our x-cut technology, which has been field-proven and provides the best stability in the bias point over life. The device provides superior signal quality across a wide range of wavelengths in the C and L bands and can be used to modulate tunable lasers. The modulator is designed for medium- and long-haul transmission in dense wavelength division multiplexing (DWDM) and time division multiplexing (TDM) systems. WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 2.5 GB/S BIAS-READY MODULATOR BUTTERFLY PACKAGE 2 Typical Performance Characteristics Typical Frequency Response Curve, S21 Typical Return Loss Curve, S11 0 0.0 -2 -4 -2.0 S11(dB) S21 (dB) -6 -4.0 -6.0 -8.0 -8 -10 -12 -14 -16 -10.0 -18 -12.0 -20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Dimensions Diagram (Specifications in inches [mm] unless otherwise noted.) 39.37±1.97 [1000±50] 39.37±1.97 [1000±50] .201 [5.11] 2.047 [51.99] Ø.079 [Ø2.01] (2) PL 7.87 [200] MINIMUM .151 [3.84] (2) PL .157 [3.99] (2) PL IN 7.87 [200] MINIMUM OUT GND RF GND .506 [12.85] (2) PL DC GND .200 [5.08] (5) PL .231 [5.87] .285 [7.24] 3.948 [100.28] Ø.177 [4.50] (2) PL .374 [9.50] (2) PL .433 [11.00] .040 [1.02] .146 [3.71] (2) PL .749 [19.02] (2) PL .298 [7.57] .143 [3.63] (5) PL .200 [5.08] .635 [16.13] BOTTOM OF PINS .735 [18.67] .835 [21.21] 1.235 [31.37] 1.435 [36.45] 2.250 [57.15] 2.450 [62.23] 3.0 2.5 GB/S BIAS-READY MODULATOR BUTTERFLY PACKAGE 3 Specifications Parameter General Material Crystal orientation Waveguide process Optical Operating wavelength Insertion loss, no connectors2 On/off extinction ratio, low frequency Optical return loss Electrical RF port Drive voltage, V peak-to-peak, at 2.5 Gb/s PRBS 3 Vπ at 100 kHz 3 S21 electro-optic bandwidth (-3 dBe) 1, 3 S11 return loss, 0.03 to 2.5 GHz 3 RF input power Chirp, alpha parameter Bias port Vπ at DC Mechanical Input Output4 RF connection Bias connection Environmental Qualification reference Operating temperature Storage temperature Specification Lithium niobate x-cut, y-propagating Titanium-indiffused 1530 to 1565 nm ≤ 4.5 dB ≥ 20 dB ≥ 50 dB 3.9 V typical ≤ 4.5 V ≥ 2.5 GHz ≤ -8 dB ≤ 24 dBm |α|< 0.2 ≤ 8.5 V Fujikura SM-15-P-8/125-UV/UV-400 SMF-28 Pins Pins Telcordia 468 0 to 65 °C -40 to 85 °C 1. Relative to 30 MHz. 2. Insertion loss is measured at the maximum of the modulator’s transfer function and does not include the 3 dB loss incurred when operating at quadrature. 3. Variances with temperature and wavelength included. 4. PM output fiber also available. 2.5 GB/S BIAS-READY MODULATOR BUTTERFLY PACKAGE 4 Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: 21044597 Product Code 21044597 21044598 Description 2.5 Gb/s modulator with FC/SPC optical connectors 2.5 Gb/s modulator with no optical connectors Note: Other connectors available upon special request. Call JDSU for more information. SMF-28 and Fujikura SM-15-P-8/125-UV-400 are registered trademarks of Corning Incorporated. Telcordia is a trademark of Telcordia Technologies, Inc. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase Corporation. All rights reserved. 10116234 Rev. 002 10/05 25BRBMOD.DS.CC.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com