COMMUNICATIONS MODULES & SUBSYSTEMS 10GBASE-SR X2 Optical Transceiver JX2 Series Key Features • 850 nm, up to 300 m over multimode fiber (MMF) • 10.3125 Gb/s data rate (Ethernet); 10.51875 Gb/s (Fibre Channel) • 4-bit XAUI differential AC-coupled electrical interface • Positive power supply operation (1.8 V, 3.3 V) • 2.8 W typical, 3.6 W maximum • Low power mode • Digital diagnostic monitoring • Single-mode duplex SC optical connector Applications • Local Area Networks (LAN) • Storage Area Networks (SAN) • Ethernet switches and applications • Fibre Channel switches and applications Compliance • IEEE 802.3ae standard • 10GFC standard • X2 MSA Revision 2.0b • Tested in accordance with Telcordia GR-468 • Class 1 laser safety • UL and TUV certified NORTH AMERICA : 800 498-JDSU (5378) The JDSU 10GBASE-SR X2 Transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at a signaling rate of 10.3125 Gb/s for Ethernet and 10.51875 Gb/s for Fibre Channel. This product complies with the IEEE 802.3ae 10GBASE-SR standard, the 10G Fibre Channel standard, and the X2 Transceiver Multi-Source Agreement (MSA) (Rev 2.0b). The transceiver uses a short wavelength (850 nm) VCSEL that enables data transmission over multi-mode fiber at distances of up to 300 m. This module features a 4-bit XAUI differential hot-pluggable electrical interface and accepts an industry standard duplex SC optical connector. Digital diagnostic monitoring (DDM) is implemented and fully compliant with X2 DDM architecture. The unit monitors temperature, receive optical power, transmit optical power, and laser bias current. Support for longer distances is available. Contact your JDSU Sales Representative. WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com 10GBASE-SR X2 OPTICAL TRANSCEIVER 2 Specifications Parameter Electrical Interface Transmit signal input differential swing Receive signal output differential swing Control I/O signals Optical Wavelength Data rate(s) Distance Maximum launch power into fiber (average) Minimum launch power into fiber (average) Transmitter and dispersion penalty (TDP) Optical modulation amplitude (OMA) Stressed receiver sensitivity (OMA) Extinction ratio (ER) Maximum bit error rate at minimum receiver sensitivity Power Power Voltage Supply current Environmental Operating temperature (case) Operating humidity Storage temperature Mechanical Dimension Form factor Digital Diagnostics Base Enhance options Laser Safety US International JX2-13SMAA1 (Ethernet) JX2-15SMAA1 (Fibre Channel) 160/2000 mVp-p 800/1600 mVp-p Low voltage TTL (3.3 V) Maximum Minimum Maximum Minimum Typical Maximum Typical Maximum 850 nm 10.3125 Gb/s and 10.51875 Gb/s Up to 300 m -1.08 dBm -4.0 dBm 3.9 dB -5.2 dBm -10.3 dBm 3.0 dB <10¯¹² 2.8 W 3.6 W 1.8 V (±5%), 3.3 V (±5%) 375 mA (1.8 V), 650 mA (3.3 V) 500 mA (1.8 V), 800 mA (3.3 V) 0°C to 70°C 8% to 80% -40°C to 85°C X2 MSA Revision 2 compliant X2, SC connector XENPAK DDM ALL 21 CFR 1040.10 except for deviations pursuant to Laser Notice 50 (2001); UL approved for US and Canada IEC 60825:Am.2 (2001) and IEC 60950 (CB Scheme) 10GBASE-SR X2 OPTICAL TRANSCEIVER 3 Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: JX2-13SMAA1 JX2- AA1 Code 13 15 Transceiver Ethernet Fibre Channel Code SL SM SX Height Low Mid Tall Telcordia is a registered trademark of Telcordia Technologies Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2005 JDS Uniphase Corporation. All rights reserved. 30137395 Rev. 001 12/05 10GSRX2TRANSCEIVER.DS.CMS.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com