COMMUNICATIONS MODULES & SUBSYSTEMS Compact, Low Cost Single-Channel or Narrow Band Amplifiers OA 400 Amplifier Series Key Features • Compact, MSA compatible package size, 70 x 90 x 12 mm • Small signal gain, ~24 dB • Saturated output power, ~15 dBm • Wide dynamic range Applications • Single-channel and narrowband amplification • Boost tunable laser sources • Power equalization and flexible pre-emphasis • Compensation of switching and signal grooming loss The JDSU OA 400 Amplifier Series provides C-band optical amplification in an economical and compact package. It is designed for use in dense wavelength division multiplexing (DWDM) telecommunication systems, at points where the signal is not multiplexed. It can also be used in edge or access networks, where gain flattening is not required. Fully qualified JDSU grating-stabilized 980 nm pump lasers provide the stability of operation and reliability required by today's highest speed DWDM systems. The OA 400 can provide up to 24 dB small signal gain and up to 15 dB saturated output power, with a noise figure of less than 6 dB across the entire C band. The amplifier is delivered in a 70 x 90 x 12 mm platform, which supports a MultiSource Agreement. The OA 400 performs as a preamplifier, a line amplifier, and a booster amplifier. JDSU has extensive experience with the development of fully functioning erbium doped fiber amplifiers (EDFAs), and can design high-performance optical amplifier products that meet your time-to-market requirements. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com OA 400 AMPLIFIER SERIES 2 OA 400 Series Amplifier Detail (Specifications in mm unless otherwise noted.) 4xM3-0.5, thru. 4xM2.5-0.45, 5 mm deep 72 mm 19 1 2 83 mm 20 90 mm IN OUT 3.25 mm 15.9±0.2 mm 8 mm 3.5 mm 11 mm 9 mm 25 mm 19 mm 2.5 mm 1.8 mm 22.4±0.2 mm 12 mm 63 mm 70 mm 3.5 mm Pinout Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Ground, monitor photodiode (MPD) Input MPD cathode Input MPD anode Output MPD cathode Output MPD anode No connector (NC) Laser diode anode Laser diode anode NC NC NC NC NC NC NC NC Ground, laser diode NC Laser diode cathode Laser diode cathode Electrical pins will be 0.5 x 0.5 mm. Pin pitch will be 2.0 mm, center to center. OA 400 AMPLIFIER SERIES 3 Specifications Parameter OAA-15U0400Cx Signal wavelength Total input signal power Total output signal power Signal gain Noise figure Gain flatness Dimensions (W x H x D) Operating temperature Power consumption 1529 to 1562 nm -30 to 0 dBm 15 dBm 24 dB 6.0 dB N/A 70 x 90 x 12 mm 0 to 70 °C 4.5 W Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: OAA-15U0400CA OA A Code A Classification Active 1 5 Code 15 Power Out1 15 dBm U0400 C Code C Band C band Code 3 5 9 A C E Connector Type2 FC/APC SC/APC FC/UPC SC/UPC (default) MU E2000 1. Higher powers available upon request. 2. More connector options available upon request. OA 400 AMPLIFIER SERIES User Safety The invisible laser light emitted from this module is harmful to the human eye. Proper laser safety eyewear must be worn during operation. ESD Protection The laser diodes and photodiodes contained in this module are very reliable under normal operating conditions. However, they are easily destroyed by inadvertent electrostatic discharge (ESD). Take extreme precaution to prevent ESD. Use wrist straps, grounded work surfaces, and antistatic techniques when operating this module. When not in use, the fiber amplifier must be kept in a static-free environment with the shorting plug covering the connector. AT T E N T I O N OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES SMF-28 is a registered trademark of Corning Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 10138105 Rev. 003 03/06 OA400.DS.CMS.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com