COMMERCIAL LASERS Q-Switched IR Laser M110 Series Key Features • 1047 nm output • Short pulse duration • Superior pulse stability • Pulse equalization mode • Burst mode • Reliability • Compact efficient package Applications • Seeder for OPO • Frequency generation • Optical Time Domain Reflectometry (OTDR) • Memory repair • Thin film trimming • Ranging • Marking The JDSU M110 lasers are mini Q-switched, air-conduction-cooled devices employing an Nd:YLF gain material, a laser pump source, and pulse-on-demand system control capabilities. The patented cavity design features a high-opticalpower density laser pump efficiently and compactly coupled to the laser cavity, Brewster-angled intracavity surfaces, proprietary mounting of optical elements, and minimal use of optical coatings. These design features ensure highly efficient operation and minimal feedback. As a result, diode power can be decreased, significantly lengthening the diode’s life. The M110 lasers operate many times above lasing threshold, so a large number of longitudinal modes are present and significant averaging occurs while reducing spiking and improving pulse energy stability. The Nd:YLF gain medium is also advantageous in this respect, since it has a broader emission bandwidth than Nd:YAG, thereby supporting more longitudinal modes. The net result is excellent energy stability, typically <1.0% rms. The pulse-energy equalization feature allows user to specify the highest repetition rate at which the laser will operate, and it then keeps the pulse shape constant for lower repetition rates. First-pulse suppression eliminates unwanted large pulses at the beginning of a burst of pulses to insure no damage to laser, user optics, or material in process. The M110 laser series also provides three operational modes: continuous wave (CW), internal trigger, and external trigger. Several pulse width versions are available. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com Q-SWITCHED IR LASER 2 M110 Laser Head (Specifications in inches [mm] unless otherwise noted.) Q-SWITCHED IR LASER 3 Specifications Parameter Wavelength Spatial mode Repetition rate range Externally triggered Internally triggered Performance at 1 KHz Energy per pulse Pulse width Energy stability Timing stability w.r.t. External trigger signal Internal trigger signal Polarization Beam roundness Waist location Inside laser head, from window Beam diameter at window, 1/e2 Beam divergence, full angle Warm-up time From cold start From standby Input and Ambient Operating base temperature Relative humidity, non-condensing Dimension (W x H x L) Weight M110-1047-050 M110-1047-100 1047 nm TEM00 0 to 100 kHz 1 Hz to 100 kHz >50 µJ <7 ns <1% rms >100 µJ <5 ns <1% rms ±15 ns at 1 kHz ±1 ns at 1 kHz >100:1, horizontal <10% elliptical 1 cm nominal 0.2 mm nominal 8 mrad nominal <15 minutes <1 minute 15 to 35 °C 10 to 80% 12 x 6 x 7 cm 3.09 lbs (1.4 kg) Q-SWITCHED IR LASER 4 M110 Power Supply Parameter Specification User interface Weight Dimension (W x H x L) Input and Ambient Voltage Frequency Input power, maximum Operating ambient temperature Relative humidity, non-condensing On-off switch 7.72 lbs (3.5 kg) 26 x 11 x 27 cm 90 to 285 V AC 47 to 63 Hz 100 W 15 to 35 °C 10 to 80% Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: M110-1047-050 M110-1047Code 050 100 Energy per Pulse1 50 µJ at 1 kHz 100 µJ at 1 kHz 1. Other outputs at 1321, 1343, and 1053 nm are available upon request. Q-SWITCHED IR LASER Compliance with Regulatory Requirements The lasers are Class IIIb lasers as defined by the Federal Register 21 CFR 1040.10 Laser Safety Standard. The Standard requires that certain performance features and laser safety labels be provided on the product. DANGER VISIBLE AND/OR INVISIBLE LASER RADIATION: AVOID DIRECT EXPOSURE TO BEAM MAXIMUM OUTPUT POWER 500 mW MAXIMUM ENERGY/PULSE 200 µJ/0.5 ns WAVELENGTH 0.5 µm and/or 1.0 µm or 1.3 µm* *see manual CLASS IIIb LASER PRODUCT B1 Warranty JDSU diode-pumped M110 series laser systems are warranted to be free of defects in materials and workmanship for thirteen months from the date of shipment. Patent Information The M110 laser systems are manufactured under several US patents including 4455657, 457893, 4731787, 4734912, 4739507, 4749842, 4752931, 4764933, 4797896, 4809291, 4827485, 4829532, 4909612, 4947402, 4998255, 5027361, 5076678, 5103457, 5130995, 5226051, 5237584, 5299222 and/or 5329539. Additional patents pending. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 10143148 Rev. 002 09/06 M110.DS.CL.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com