KOA CR2A10TTE

1733 Reader's Spreads pg1-203:document
1/27/09
4:11 PM
Page 143
PMS 300 neg.
Black neg.
chip resistor array
EU
features
• Exceptional filtering capabilities and superior
characteristics
• Filter out high frequency content of digital signals
• Marking: Yellow three-digit on green protective coat
• Products with lead-free terminations meet
EU RoHS requirements
dimensions and construction
Size
d1
L
a1
L
W
t
Dimensions inches (mm)
a1
b1
b2
d1
p
1J
.126±.006 .063±.006 .026±.004 .013±.004 .006±.004 .014±.004 .01±.004 .025 Ref.
(3.2±0.15) (1.6±0.15) (0.65±0.1) (0.33±0.1) (0.15±0.1) (0.35±0.1) (0.25±0.1) (0.635 Ref.)
2A
.157±.008 .083±.008 .026±.004 .02 Ref.
(4.0±0.2) (2.1±0.2) (0.65±0.1) (0.5 Ref.)
.006 Ref. .012±.008 .016±.006 .031 Ref.
(0.15 Ref.) (0.3±0.2) (0.4±0.15) (0.8 Ref.)
p
b1 b2
W
t
Protective
Coating
Resistive
Film
Ceramic
Substrate
Inner
Electrode
Electrode
ordering information
New Part #
CR
2A
10
Type
Size
Terminations
1J
2A
Y
T
Circuit
Symbol
Y: 1J
Nil: 2A
Termination
Material
T: Sn
(Other termination
styles available,
contact factory
for options)
TE
Packaging
TE: 7" embossed
plastic
(4,000 pieces/reel)
xxx/xxxJ
Capacitance
Resistance
3 digits + 1
for resistance
tolerance for each
Ex: 101/470J
For further information on packaging,
please refer to Appendix A.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/30/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
145
resistors
CR
1733 Reader's Spreads pg1-203:document
1/27/09
4:11 PM
Page 144
CR
resistors
chip resistor array
circuit schematic
10
9
8
7
6
1
2
3
4
5
applications and ratings (CR1J)
Part
Designation
Capacitor
Rating
Capacitor
Item
––––
12V (DC)
+30% / -20%
+20% / -55% (-25°C~85°C)
3% Maximum, 0 + 1Khz 1.0Vrms
10pF, 15pF, 22pF
Voltage Rating
Capacitance Tolerance
Temperature Coefficient
Dissipation Factor
Capacitance Range
CR1J
––––
––––
Resistor
Item
Maximum Overload Voltage
Power Rating
Maximum Working Voltage
Temperature Coefficient
Resistance Tolerance
Operating Temperature Range
Resistor
Range
Resistor
Rating
15 - 8V
1/16W (<70°C)
79V
±200ppm/°C
±5%
-25°C to +85°C
22Ω, 47Ω,
100Ω, 220Ω
Rated Ambient Temperature
70°C
Resistor
Item
Power Rating
Maximum Working Voltage
Maximum Overload Voltage
Temperature Coefficient
Resistor Tolerance
Rated Ambient Temperature
Operating Temperature Range
Resistor
Rating
0.063W
7.9V
15.8V
±200ppm/°C
±5%
+70°C
-25°C to +85°C
Resistor
Range
22Ω,47Ω,100Ω,
220Ω,470Ω,
1KΩ, 47KΩ
applications and ratings (CR2A)
Part
Designation
CR2A
Capacitor
Item
Capacitance Measuring Condition
Voltage Rating
Capacitance Tolerance
Temperature Coefficient
Dissipation Factor
Insulation Resistance
Dielectric Withstanding Voltage
Operating Temperature Range
Capacitor
Rating
1 KHz ± 10% (1 Vrms ± 0.2V)
25V (DC)
±20% / ±30%
+20% / -55% (-25°C to +85°C)
3% Maximum (at 1 KHz 1.0 Vrms)
1,000MΩ Minimum
62.5V DC, 5 sec., 50mA charge
-25°C to +85°C
Capacitance Range
22pF, 47pF, 100pF
environmental applications
Derating Curve
120
% Rated Power
100
80
60
40
20
0
-30 -20 -10
-25
0
10
20
30
40
50
60
70
80
90
85
Ambient Temperature
(°C)
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
146
12/31/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
1733 Reader's Spreads pg1-203:document
1/27/09
4:11 PM
Page 145
PMS 300 neg.
Black neg.
chip resistor array
environmental applications (continued)
Performance Characteristics
Parameter
Requirement
Test Method
Within 2 minutes at DC 25V between terminal and another
v
Insulation Resistance
More than 103 MΩ
Dielectric Withstanding Voltage
No evidence of flaming,
fuming or breakdown
Resistance to Solder Heat
No evidence of damage
∆C within ±20%
∆R within ±5%
D.F. within 5%
I.R. more than 100 MΩ
2.5 times maximum rated voltage for 5 seconds with 50 mA maximum
charging current
v
Immerse in solder (H63A) @ 260° ± 5°C for 10 seconds ± 1 second
Measurement shall be done 24 hours ± 4 hours @ room condition after test.
Approximately 95% of the terminal
should be covered with new solder
Immerse in solder (H63A) @ 235° ± 5°C for 3 seconds ± 0.5 second
Terminal Strength
(Bend Test)
No mechanical damage
Specimen shall be soldered on PCB and support by applying strength
so that the bending width becomes 3mm
Resistance to Solvents
No mechanical damage
Immerse in the IPA @ 20°C to 25°C for 60 seconds ± 10 seconds
Vibration
No evidence of damage
2 hours in each direction of X, Y, Z on PCB at a frequency range
of 10 - 55 - 10Hz with 1.5mm amplitude. Measurement shall be done
24 hours ± 4 hours @ room condition after test.
Temperature Cycling
No evidence of damage
∆C within ±20%
∆R within ±5%
D.F. within 5%
I.R. more than 100 MΩ
100 cycles between -25°C/30 minutes and +85°C/30 minutes
Measurement shall be done 24 hours ± 4 hours @ room condition after test.
Humidity
(No Load)
No evidence of damage
∆C within ±20%
∆R within ±5%
D.F. within 5%
I.R. more than 100 MΩ
MIL-STD-202F, Method 106, 10 cycles
Measurement shall be done 24 hours ± 4 hours @ room condition after test.
Moisture Resistance
No evidence of damage
∆C within ±20%
∆R within ±5%
D.F. within 5%
I.R. more than 100 MΩ
40°C ± 2°C, 90 - 95% RH, 500 hours
Capacitor: DC 25V, 500 hr ON
Resistor: Rated working voltage, 1.5 hr ON, 0.5 hr OFF
Measurement of capacitor shall be done 24 hours ± 4 hours
@ nominal condition after test.
Load Life
No evidence of damage
∆C within ±20%
∆R within ±5%
D.F. within 5%
I.R. more than 100 MΩ
85°C ± 2°C, 1000 hours
Capacitor: DC 25V, 1000 hr ON
Resistor: Rated working voltage, 1.5 hr ON, 0.5 hr OFF
Measurement of capacitor shall be done 24 hours ± 4 hours
@ nominal condition after test.
Solderability
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
11/01/03
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
147
resistors
CR