MARL 512-930-04

FEATURES
PROFESSIONAL LED INDICATORS Ø12.7mm Mounting
512 SERIES
PACK QUANTITY = 10 PIECES
l
Robust bright nickel plated brass housing
l
Sealed to IP67
l
Flying lead terminations available
l
Suitable for high vibration applications
l
Internal reverse protection diode fitted as standard in all
voltage models.
SPECIFICATION
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours.
PART NUMBER
COLOUR
Luminous intensity figures refer to the unmodified discrete LED.
LENS
VOLTAGE
DC (Vdc)
Vopr
CURRENT
DC (mA)
lopr
LUMINOUS
INTENSITY
lv@20mA (mcd)
WAVE
OPERATING
STORAGE
LENGTH
TEMP
TEMP
λp (nm)
Topr
Tstg
HIGH INTENSITY
512-501-21
Red
Smoked
12
19
11000
643
-40 ~ +95^
-40 ~ +100
Yes
512-521-21
Yellow
Smoked
12
19
16000
591
-40 ~ +95^
-40 ~ +100
Yes
512-532-21
Green
Smoked
12
20
23000
527
-40 ~ +95^
-40 ~ +100
Yes
512-930-21
Blue
Smoked
12
20
7000
470
-40 ~ +95^
-40 ~ +100
Yes
512-997-21
Cool White
Smoked
12
20
14000
see below
-40 ~ +95^
-40 ~ +100
Yes
512-501-23
Red
Smoked
24-28
20
11000
643
-40 ~ +95^
-40 ~ +100
Yes
512-521-23
Yellow
Smoked
24-28
20
16000
591
-40 ~ +95^
-40 ~ +100
Yes
512-532-23
Green
Smoked
24-28
20
23000
527
-40 ~ +95^
-40 ~ +100
Yes
512-930-23
Blue
Smoked
24-28
20
7000
470
-40 ~ +95^
-40 ~ +100
Yes
512-997-23
Cool White
Smoked
24-28
20
14000
see below
-40 ~ +95^
-40 ~ +100
Yes
Vdc
mA
mcd
nm
°C
°C
UNITS
Other voltages AC/DC available. Please contact our Technical Sales.
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs.
997F-C
*Typical emission colour cool white
x
0.245
0.361
0.356
0.264
y
0.229
0.385
0.351
0.220
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within
a batch.
How to Order:
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2008 : DS 017/07
Issue 3
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 1 of
3
512 Series
Mounting Hole
Dimensions in mm (Typical)
Anode termination indicated by red sleeve
Not to scale
Mounting hole to be clean and burr free
MATERIALS
Body
PUSH-ON CONNECTORS
Brass to BS 2874 CZ121
Nickel plated to BS 1224
Nut
Brass to BS 2874 CZ121
nickel plated to BS 1224
Panel Seal
Viton
Termination
Brass to BS 2874 CZ108
Copper flash undercoat with silver flash finish
Lock Washer
Zinc plated steel
Fresnel lens
Polycarbonate
Encapsulation
PC5430 resin
925-000-00 is brass tin plated.
For use with 512 series lamps.
Dimensions in mm (Typical)
Not to scale
TECHNICAL CHARACTERISTICS
SERIES
512
MAXIMUM
MAXIMUM
DISSIPATION
VOLTAGE
POWER
PANEL
REVERSE
1000
1000
mw
Vdc
* = current version
NUT
MINIMUM
MIN/MAX.
TORQUE
CENTRES
THICKNESS
12.7
1.0
x,y=19.5
1.5-8.0
mm
Nm
mm
mm
CUTOUT
MOUNTING
MOUNTING
PANEL
• = voltage version
OPTIONAL FLYING LEAD TERMINATIONS
ORDER
CODE
SUFFIX
SUPPLY
WIRE
VOLTAGE
WIRE
COLOUR
LENGTH
15
DC Products
Red-anode / Black-cathode
150mm
15
AC Products
Brown-live / Blue-neutral
150mm
19
DC Products
Red-anode / Black-cathode
1000mm
19
AC Products
Brown-live / Blue-neutral
1000mm
NO/DIAMETER
DIAMETER
CONDUCTORS
INSULATION
19/0.15mm
1.2mm
OF
OVER
COMMENTS
Customised
lengths
available
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2008 : DS 017/07
Issue 3
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of
3
DERATING INFORMATION
501 & 521
532, 930 & 997
ALSO AVAILABLE
Part numbers also available in the 512 Series:
PART NO.
COLOUR
VOLTAGE DC
(Vdc) Vopr
512-501-04
Red
20mA
512-501-22
Red
24 Vdc
512-501-24
Red
48 Vdc
512-501-26
Red
230 Vdc
512-501-75
Red
110 Vac
512-501-76
Red
230 Vac
512-521-04
Yellow
20mA
512-521-20
Yellow
5/6 Vdc
512-521-22
Yellow
24 Vdc
512-521-24
Yellow
48 Vdc
512-521-26
Yellow
230 Vdc
512-521-75
Yellow
110 Vac
512-521-76
Yellow
230 Vac
512-532-04
Green
20mA
512-532-22
Green
24 Vdc
512-532-24
Green
48 Vdc
512-532-26
Green
230 Vdc
512-532-75
Green
110 Vac
512-532-76
Green
230 Vac
512-540-21
Red
12 Vdc
512-930-04
Blue
20mA
512-997-04
White
20mA
512-997-22
White
24 Vdc
512-997-24
White
48 Vdc
512-997-75
White
110 Vac
512-997-76
White
230 Vac
UNITS
The products listed above illustrate all of the options available to order. These products may have custom modifications that alter
their operation beyond the generic information contained within this datasheet. Please contact sales for further information.
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2008 : DS 017/07
Issue 3
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 3 of
3