FEATURES PROFESSIONAL LED INDICATORS Ø6.1mm Mounting 696 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Counter sunk mounting for flush styling l Sealed to IP67 l Wide viewing angle l Vandal resistant l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 696-301-21 Red Colour Diffused 12 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 696-325-21 Yellow Colour Diffused 12 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 696-324-21 Green Colour Diffused 12 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 696-934-21 Blue Colour Diffused 12 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 696-998-21 Cool White Colour Diffused 12 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes 696-301-23 Red Colour Diffused 24-28 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 696-325-23 Yellow Colour Diffused 24-28 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 696-324-23 Green Colour Diffused 24-28 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 696-934-23 Blue Colour Diffused 24-28 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 696-998-23 Cool White Colour Diffused 24-28 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 696 Series Panel seal Sealing ring Panel and Mounting Hole * Min/max panel thickness is 3mm / 6.5mm Dimensions in mm (Typical) Anode termination indicated by long pin Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Black Anodised Aluminium Sealing Ring Black Anodised Aluminium Termination Tin Plated Phosphor Bronze Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin 909-000-00 is gold plated 910-000-00 is tin plated Dimensions in mm (Typical) Not to scale For use with 696 series lamps TECHNICAL CHARACTERISTICS SERIES 696 MAXIMUM MAXIMUM DISSIPATION VOLTAGE mw Vdc POWER 500 PANEL REVERSE CUTOUT 1000 NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS MOUNTING MOUNTING PANEL 6.1 0.65 x,y = 15.0 3.0-6.5 mm Nm mm mm OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 325 301 324, 934 & 998 website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 055/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3