MITSUBISHI DIODE MODULES RM75TPM-M,-H,-24,-2H MEDIUM POWER GENERAL USE INSULATED TYPE RM75TPM-M,-H,-24,-2H ● ● ● ● ● IO VRRM DC output current ..................... 150A Repetitive peak reverse voltage ............ 400/800/1200/1600V 3 phase bridge Insulated Type UL Recognized Yellow Card No. E80276 File No. E80271 APPLICATION AC motor controllers , DC motor controllers, Battery DC power supplies, DC power supplies for control panels, and other general DC power equipment OUTLINE DRAWING & CIRCUIT DIAGRAM Dimensions in mm 80 20 20 MOUNTING 2–φ5.5 HOLES 3 ~ ~ 11.5 10.5 40 ~ ~~~ + - + 30 68 ±0.25 5–M5 NUTS - CIRCUIT DIAGRAM LABEL 8 +1.5 24.1 -0.5 10 Feb. 2009 MITSUBISHI DIODE MODULES RM75TPM-M,-H,-24,-2H MEDIUM POWER GENERAL USE INSULATED TYPE ABSOLUTE MAXIMUM RATINGS Symbol Voltage class Parameter Unit M H 24 2H VRRM Repetitive peak reverse voltage 400 800 1200 1600 VRSM Non-repetitive peak reverse voltage 480 960 1350 1700 V Ea Recommended AC input voltage 110 220 370 440 Vrms Symbol Conditions V Ratings Unit IO DC output current Three-phase full wave rectifying circuit, TC=99°C 150 A IFSM Surge (non-repetitive) forward current One half cycle at 60Hz, peak value 1500 A I2t I2t for fusing Value for one cycle of surge current 9380 A2s f Maximum operating frequency 1000 Hz Tj Junction temperature –40~+150 °C Tstg Storage temperature –40~+125 °C Viso Isolation voltage 2500 Vrms Main terminal M5 screw 1.47~1.96 N·m Mounting M5 screw 1.47~1.96 N·m 200 g Parameter — Mounting torque — Weight Charged part to base plate, f=60Hz, AC 1 minute Typical value ELECTRICAL AND THERMAL RESISTANCE CHARACTERISTICS Symbol Conditions Parameter Limits Min. Typ. Max. Unit IRRM Repetitive reverse current Tj=150°C, VRRM applied — — 15 VFM Forward voltage Tj=25°C, IFM=150A, instantaneous meas. — — 1.3 V Rth (j-c) Thermal resistance Junction to case — — 0.13 K/ W Rth (c-f) Contact thermal resistance Case to heat sink, conductive grease applied — — 0.06 K/ W Insulation resistance Measured with a 500V megohmmeter between main terminal and case 10 — — MΩ — mA Feb. 2009 2 MITSUBISHI DIODE MODULES RM75TPM-M,-H,-24,-2H MEDIUM POWER GENERAL USE INSULATED TYPE PERFORMANCE CURVE MAXIMUM FORWARD CHARACTERISTICS ALLOWABLE SURGE (NON-REPETITIVE) FORWARD CURRENT 1600 SURGE (NON-REPETITIVE) FORWARD CURRENT (A) FORWARD CURRENT (A) 104 7 Tj = 25°C 5 3 2 103 7 5 3 2 102 7 5 3 2 101 0.8 1.2 1.6 2.0 2.4 1400 1200 1000 800 600 400 200 0 100 2.8 2 3 4 5 7 10 20 30 50 70100 FORWARD VOLTAGE (V) CONDUCTION TIME (CYCLES AT 60Hz) MAXIMUM TRANSIENT THERMAL IMPEDANCE (JUNCTION TO CASE) MAXIMUM POWER DISSIPATION 0.14 350 POWER DISSIPATION (W) 400 TRANSIENT THERMAL IMPEDANCE (K/W) 100 2 3 5 7 101 0.16 0.12 0.10 0.08 0.06 0.04 0.02 300 250 200 150 100 50 0 10–3 2 3 5 710–2 2 3 5 710–1 2 3 5 7 100 0 TIME (s) 0 20 40 60 80 100 120 140 160 DC OUTPUT CURRENT (A) ALLOWABLE CASE TEMPERATURE VS. DC OUTPUT CURRENT CASE TEMPERATURE (°C) 160 150 140 130 120 110 100 90 80 0 20 40 60 80 100 120 140 160 DC OUTPUT CURRENT (A) Feb. 2009 3