SLOS058C – OCTOBER 1979 – REVISED DECEMBER 2002 D µA741 Operating Characteristics D Low Supply-Current Drain . . . 0.6 mA Typ D D D D D LM148 . . . J PACKAGE LM248 . . . D OR N PACKAGE LM348 . . . D, N, OR NS PACKAGE (TOP VIEW) (per amplifier) Low Input Offset Voltage Low Input Offset Current Class AB Output Stage Input/Output Overload Protection Designed to Be Interchangeable With Industry Standard LM148, LM248, and LM348 1OUT 1IN– 1 IN+ VCC+ 2IN+ 2IN– 2OUT description/ordering information 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN– 4IN+ VCC– 3IN+ 3IN– 3OUT LM148 . . . FK PACKAGE (TOP VIEW) 1IN– 1OUT NC 4OUT 4IN– The LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the µA741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the µA741. 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4IN+ NC VCC– NC 3IN+ 2IN– 2OUT NC 3OUT 3IN– 1IN+ NC VCC+ NC 2IN+ NC – No internal connection ORDERING INFORMATION TA VIOmax AT 25°C PACKAGE† PDIP (N) 0°C to 70°C –25°C to 85°C 6 mV TOP-SIDE MARKING Tube of 25 LM348N Tube of 50 LM348D Reel of 2500 LM348DR SOP (NS) Reel of 2000 LM348NSR LM348 PDIP (N) Tube of 25 LM248N LM248N Tube of 50 LM248D Reel of 2500 LM248DR Tube of 25 LM148J SOIC (D) 6 mV SOIC (D) CDIP (J) –55°C 55°C to 125°C ORDERABLE PART NUMBER LM348N LM348 LM248 LM148J 5 mV LCCC (FK) Tube of 50 LM148FK LM148FK † Package drawings, standard packing quantities, thermal data, symboliztion, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated !"# $"%&! '#( '"! ! $#!! $# )# # #* "# '' +,( '"! $!# - '# #!# &, !&"'# # - && $## ( $'"! !$& ..// && $## # # #' "&# )#+ # #'( && )# $'"! $'"! $!# - '# #!# &, !&"'# # - && $## ( POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 SLOS058C – OCTOBER 1979 – REVISED DECEMBER 2002 symbol (each amplifier) + IN+ OUT – IN– absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ (see Note 1): LM148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V LM248, LM348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V Supply voltage, VCC– (see Note 1): LM148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –22 V LM248, LM348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V Differential input voltage, VID (see Note 2): LM148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V LM248, LM348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage, VI (either input, see Notes 1 and 3): LM148 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –22 V LM248, LM348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Operating virtual junction temperature,TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Package thermal impedance, θJA (see Notes 5 and 6): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W Package thermal impedance, θJC (see Notes 7 and 8): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61°C/W J package . . . . . . . . . . . . . . . . . . . . . . . . . . 15.05°C/W Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: J package . . . . . . . . . . . . . . . . . . . . . 300°C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: D, N, or NS package . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–. 2. Differential voltages are at IN+ with respect to IN–. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or the value specified in the table, whichever is less. 4. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperautre is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. 7. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable ambient temperautre is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability. 8. The package thermal impedance is calculated in accordance with MIL-STD-883. recommended operating conditions MIN MAX Supply voltage, VCC+ 4 18 V Supply voltage, VCC– –4 –18 V 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 UNIT electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted) LM148 TEST CONDITIONS† PARAMETER MIN 25°C VIO Inp t offset voltage Input oltage VO = 0 IIO Input offset current VO = 0 Full range IIB Inp t bias current Input c rrent VO = 0 Full range VICR Common-mode input voltage range RL ≥ 10 kΩ Full range ±12 RL = 2 kΩ 25°C ±10 RL ≥ 2 kΩ Full range ±10 VO = ±10 V, RL= ≥ 2 kΩ 25°C 50 Full range 25 25°C 0.8 CMRR Common mode rejection ratio Common-mode VIC = VICRmin, VO = 0 kSVR Su ly-voltage rejection ratio Supply-voltage (∆VCC±/∆VIO) VCC± = ±9 V to ±15 V, VO = 0 IOS Short-circuit output current AVD = 1 AVD = 1 No load 4 30 50 ±10 ±10 ±10 25 V 160 25 160 V/mV 15 2.5 0.8 2.5 MΩ MHz 1 1 1 25°C 60° 60° 60° 25°C 70 Full range 70 25°C 77 Full range 77 90 70 90 77 96 77 77 ±25 2.4 dB 96 dB 77 ±25 3.6 90 70 2.4 25°C 70 70 96 V ±12 ±10 15 0.8 nA ±13 ±12 ±12 nA 200 400 ±12 mV 50 ±12 ±13 ±12 2.5 30 UNIT 6 100 500 ±12 160 4 200 ±12 MAX 7.5 125 100 ±12 1 25°C 25°C VO = 0 VO = VOM 6 TYP 7.5 25 ±13 MIN ±25 4.5 2.4 mA 4.5 mA VO1/VO2 Crosstalk attenuation f = 1 Hz to 20 kHz 25°C 120 120 120 dB † All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range for TA is –55°C to 125°C for LM148, –25°C to 85°C for LM248, and 0°C to 70°C for LM348. ‡ This parameter is not production tested. 3 00 00 Unity-gain bandwidth LM348 MAX SLOS058C – OCTOBER 1979 – REVISED FEBRUARY 2002 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 ±12 B1 φm 1 325 ±12 Input resistance‡ S ppl current Supply c rrent (four (fo r amplifiers) 30 25°C ri TYP 75 Full range Large-signal differential voltage amplification ICC 5 4 RL = 10 kΩ AVD Phase margin 1 MIN 6 25°C Maximum peak eak output out ut voltage swing g MAX Full range 25°C VOM LM248 TYP SLOS058C – OCTOBER 1979 – REVISED FEBRUARY 2002 operating characteristics, VCC± = ±15 V, TA = 25°C PARAMETER SR TEST CONDITIONS Slew rate at unity gain RL = 2 kΩ, CL = 100 pF, See Figure 1 PARAMETER MEASUREMENT INFORMATION – VI + CL = 100 pF RL = 2 kΩ Figure 1. Unity-Gain Amplifier 10 kΩ 100 Ω VI – + RL = 2 kΩ CL = 100 pF AVD = –100 Figure 2. Inverting Amplifier 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MIN TYP 0.5 MAX UNIT V/µs PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM148FKB ACTIVE LCCC FK 20 1 TBD LM148J ACTIVE CDIP J 14 1 TBD LM148JB ACTIVE CDIP J 14 1 LM248D ACTIVE SOIC D 14 50 LM248DE4 ACTIVE SOIC D 14 50 LM248DR ACTIVE SOIC D LM248DRE4 ACTIVE SOIC LM248N ACTIVE LM248NE4 Lead/Ball Finish MSL Peak Temp (3) POST-PLATE N / A for Pkg Type A42 SNPB N / A for Pkg Type TBD A42 SNPB N / A for Pkg Type Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM348D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM348NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM348NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM348NSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MLCC006B – OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated