MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069B – FEBRUARY 1971 – REVISED SEPTEMBER 2002 D D D D MC1458 . . . D, P, OR PS PACKAGE MC1558 . . . JG PACKAGE Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Motorola MC1558/MC1458 and Signetics S5558/N5558 (TOP VIEW) 1OUT 1IN– 1IN+ VCC– 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN– 2IN+ MC1558 . . . FK PACKAGE (TOP VIEW) NC 1OUT NC V CC+ NC D D description/ordering information The MC1458 and MC1558 are dual general-purpose operational amplifiers, with each half electrically similar to the µA741, except that offset null capability is not provided. NC 1IN– NC 1IN+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2OUT NC 2IN– NC NC V CC– NC 2IN+ NC The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. 4 NC – No internal connection ORDERING INFORMATION TA VIOmax AT 25°C PDIP (P) 0°C to 70°C – 55°C to 125°C 6 mV 5 mV ORDERABLE PART NUMBER PACKAGE† TOP-SIDE MARKING Tube MC1458P Tube MC1458D Tape and reel MC1458DR SOP (PS) Tape and reel MC1458PSR M1458 CDIP (JG) Tube MC1558JG MC1558JG CDIP (JGB) Tube MC1558JGB MC1558JGB LCCC (FK) Tube MC1558FK SOIC (D) MC1458P MC1458 MC1558FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069B – FEBRUARY 1971 – REVISED SEPTEMBER 2002 symbol (each amplifier) + IN+ OUT – IN– schematic (each amplifier) VCC + IN – OUT IN + VCC – 2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069B – FEBRUARY 1971 – REVISED SEPTEMBER 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage, VCC+ (see Note 1): MC1458 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V MC1558 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Supply voltage, VCC– (see Note 1): MC1458 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 V MC1558 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –22 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V Input voltage, VI (either input, see Notes 1 and 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15 V Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C Package thermal impedance, θJA (see Notes 5 and 6): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W Package thermal impedance, θJC (see Notes 7 and 8): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61°C/W JG package . . . . . . . . . . . . . . . . . . . . . . . . . 14.5°C/W Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: D, P, or PS package . . . . . . . . . . . . . 260°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC– . 2. Differential voltages are at IN+ with respect to IN –. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output can be shorted to ground or either power supply. For the MC1558 only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 70°C free-air temperature. 5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. 7. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability. 8. The package thermal impedance is calculated in accordance with MIL-STD-883. recommended operating conditions VCC± Supply voltage TA Operating free-air free air temperature range POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MIN MAX UNIT ±5 ± 15 V MC1458 0 70 MC1558 –55 125 °C 3 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069B – FEBRUARY 1971 – REVISED SEPTEMBER 2002 electrical characteristics at specified free-air temperature, VCC± = ±15 V VIO Input offset voltage VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VOM Maximum peak output voltage swing 25°C TYP 1 20 Full range 80 Full range 25°C ± 12 ± 12 RL = 10 kΩ 25°C ± 12 RL ≥ 10 kΩ Full range ± 12 RL = 2 kΩ 25°C ± 10 RL ≥ 2 kΩ Full range ± 10 25°C 20 Full range 15 BOM Maximum-output-swing bandwidth (closed loop) RL = 2 kΩ, AVD = 1, VO ≥ ±10 V, THD ≥ 5% Unity-gain bandwidth AVD = 1 6 TYP MAX 1 5 6 200 20 500 ± 13 200 500 80 800 Full range VO = ±10 V MIN 300 25°C RL ≥ 2 kΩ, MC1558 MAX 7.5 25°C Large-signal g g differential voltage amplification Phase margin MIN Full range AVD B1 φm MC1458 TEST CONDITIONS† PARAMETER 500 1500 ± 12 ± 13 ± 12 ± 10 nA nA ± 14 ± 12 ± 13 mV V ± 12 ± 14 UNIT V ± 13 ± 10 200 50 200 V/mV 25 25°C 14 14 kHz 25°C 1 1 MHz deg 25°C 65 65 Gain margin 25°C 11 11 dB ri Input resistance 25°C 2 MΩ ro Output resistance Ci Input capacitance zic Common-mode input impedance f = 20 Hz CMRR Common-mode rejection ratio VIC = VICR min,, VO = 0 kSVS Supply-voltage sensitivity (∆VIO/∆VCC) VCC = ±9 V to ±15 V,, VO = 0 Vn Equivalent input noise voltage (closed loop) AVD = 100, f = 1 kHz, IOS Short-circuit output current ICC Supplyy current (both amplifiers) VO = 0 0, No load PD Total power dissipation (both amplifiers) VO = 0 0, No load VO = 0, See Note 9 RS = 0, BW = 1 Hz 0.3 2 0.3* 25°C 75 75 Ω 25°C 1.4 1.4 pF 25°C 200 200 MΩ 25°C 70 Full range 70 25°C 90 70 90 30 Full range 150 30 150 45 25°C ± 25 ± 40 ± 25 25°C 3.4 5.6 3.4 Full range 25°C 45 6.6 100 150 170 200 µV/V 150 25°C Full range dB 70 nV/√Hz ± 40 5 6.6 100 150 200 mA mA mW VO1/VO2 Crosstalk attenuation 25°C 120 120 dB *On products compliant to MIL-PRF-38535, this parameter is not production tested. † All characteristics are specified under open-loop operating conditions with zero common-mode input voltage, unless otherwise specified. Full range for MC1458 is 0°C to 70°C and for MC1558 is – 55°C to 125°C. NOTE 9: This typical value applies only at frequencies above a few hundred hertz because of the effect of drift and thermal feedback. 4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MC1458, MC1558 DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS069B – FEBRUARY 1971 – REVISED SEPTEMBER 2002 operating characteristics, VCC± = ±15 V, CL = 100 pF, TA = 25°C (see Figure 1) PARAMETER TYP MC1558 MAX MIN TYP MAX UNIT VI = 20 mV, VI = 20 mV, RL = 2 kΩ, 0.3 0.3 µs Overshoot factor RL = 2 kΩ 5 5 % Slew rate at unity gain VI = 10 V, RL = 2 kΩ 0.5 0.5 Rise time V/µs PARAMETER MEASUREMENT INFORMATION VI Output + SR MIN – tr MC1458 TEST CONDITIONS Input 0V Input Voltage Waveform CL = 100 pF RL = 2 kΩ Test Circuit Figure 1. Rise-Time, Overshoot, and Slew-Rate Waveform and Test Circuit POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 5 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) 5962-9760301Q2A ACTIVE LCCC FK 20 1 TBD 5962-9760301QPA ACTIVE CDIP JG 8 1 TBD POST-PLATE N / A for Pkg Type A42 SNPB MC1458D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1458DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1458DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1458DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1458P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MC1458PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MC1458PSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1458PSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC1558FKB ACTIVE LCCC FK 20 1 TBD N / A for Pkg Type POST-PLATE N / A for Pkg Type MC1558JG ACTIVE CDIP JG 8 1 TBD A42 SNPB N / A for Pkg Type MC1558JGB ACTIVE CDIP JG 8 1 TBD A42 SNPB N / A for Pkg Type MC1558P OBSOLETE PDIP P 8 TBD Call TI Call TI SN98212P OBSOLETE PDIP P 8 TBD Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MCER001A – JANUARY 1995 – REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0°–15° 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MLCC006B – OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MPDI001A – JANUARY 1995 – REVISED JUNE 1999 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.020 (0,51) MIN 0.015 (0,38) Gage Plane 0.200 (5,08) MAX Seating Plane 0.010 (0,25) NOM 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.430 (10,92) MAX 0.010 (0,25) M 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated