FAIRCHILD FSA859UCX

Click here for this datasheet
translated into Chinese!
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with
Power-Off Isolation
Features
Description
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
The FSA859 is a high-performance Single-Pole /
Double-Throw (SPDT) analog switch for audio
applications driven by low voltage (1.8V) baseband
processors or ASICs. The device features ultra-low RON
of 0.8Ω (maximum) at 4.5V VCC and operates over the
wide VCC range of 1.65V to 5.5V. The device is
fabricated with sub-micron CMOS technology to
achieve fast switching speeds and is designed for
break-before-make operation.
Power-Off Isolation (VCC=0V)
0.8Ω Maximum On Resistance (RON) for 4.5V VCC
0.25Ω Maximum RON Flatness for 4.5V VCC
Broad VCC Operating Range: 1.65V to 5.5V
Fast Turn-On and Turn-Off Times
Control Input Referenced to VIO
Break-Before-Make Enable Circuitry
0.5mm WLCSP packaging
ESD Performance
-
HBM: JESD22-A114, I/O to GND
CDM: JESD22-C101
IEC61000-4-2 Contact / Air
8kV
500V
The FSA859 interfaces between the low-voltage ASIC
and regular audio amplifiers and CODECs operating up
to the supply range of 5.5V through the dual-voltage
supplies of VIO and VCC. The VIO supply operates the
control circuitry, allowing for 1.8V (typical) signals on
the control pin (Sel).
8kV / 15kV
Applications
IMPORTANT NOTE:
ƒ
ƒ
ƒ
For additional performance information, please contact
[email protected].
Cellular Phone
Portable Media Player
PDA
Ordering Information
Part
Number
FSA859UCX
Operating
Top Mark
Temperature Range
-40°C to +85°C
N2
Package
Eco Status
Green
8-Ball WLCSP, 0.5mm pitch
Packing
Method
Tape and
Reel
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Analog Symbols
Sel
Control
Vcc
Vio
B1
B0
A
GND
Figure 1. Analog Symbol
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
August 2008
KK
X
Y
Z
=
=
=
=
Lot Run Code
Year
Work Week
Assembly Site
Figure 2. Top Mark with Pin 1 Orientation
Pin Configuration
B1
1 A1
A2 8
GND
GND
2 B1
B2 7
A
B0
3 C1
C2 6
Sel
Vio
4 D1
D2 5
Vcc
Figure 3. Pin Assignments (Top Through View)
Pin Definitions
Pin
Ball
Name
Description
1
A1
B1
2
B1
GND
3
C1
B0
Data Ports (Normally Closed)
4
D1
VIO
Digital Control Supply
5
D2
VCC
Supply Voltage
6
C2
Sel
Control Input
7
B2
A
8
A2
GND
Data Port (Normally Open)
Ground
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Marking Information
Common Data Port
Ground
Truth Table
Control Input (Sel)
Function
LOW
B0 connected to A
HIGH
B1 connected to A
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
VCC
Parameter
Min.
Max.
Unit
Supply Voltage
-0.5
6.5
V
-0.5
6.5
V
-0.5
VCC + 0.5
V
-0.5
6.5
V
VIO
Digital Control Supply Voltage
Vsw
Switch Voltage
VIN
(1)
Input Voltage
(1)
IIK
Input Diode Current
-50
mA
ISW
Switch Current (Continuous)
200
mA
Peak Switch Current
400
mA
180
mW
ISWPEAK
PD
TSTG
Pulsed at 1ms Duration, <10% Duty Cycle
Power Dissipation at 85°C
+150
°C
TJ
Storage Temperature Range
Maximum Junction Temperature
-65
+150
°C
TL
Lead Temperature (Soldering, 10 seconds)
+260
°C
Human Body Model (JEDEC: JESD22-A114)
ESD
I/O to GND: A
8
All Pins
2
Charged Device Model (JEDEC: JESD22-C101)
Machine Model (JEDEC: JESD22-A115)
Contact
kV
500
V
100
V
8
IEC6100-4-2 Discharge system test performed
on Fairchild’s FSA859 applications testing board Air
kV
15
Note:
1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
Recommended Operating Conditions
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Absolute Maximum Ratings
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIO
Digital Control Supply
Sel
Control Input Voltage
VSW
Switch Input Voltage
(2)
TA
Operating Temperature
θJA
Thermal Resistance, Still Air
Min.
Max.
Unit
1.65
5.50
V
1.65
1.95
V
0
VIO
V
0
VCC
V
-40
+85
°C
350
°C/W
Note:
2. Control Input must be held HIGH or LOW; it must not float.
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
3
All typical values are at 25°C unless otherwise specified. VIO=1.65 to 1.95V.
Symbol
Parameter
VCC (V)
VIHIO
Input Voltage High VIO
VILIO
IIN
INO(0FF),
INC(OFF),
INO(On),
INC(On)
IA(ON)
IOFF
ICC
Conditions
TA=+25°C
Max.
1.95 to 5.50
0.65•VIO
VIO
V
Input Voltage Low VIO
1.95 to 5.50
0
0.35•VIO
V
Control Input
Leakage
1.95 to 5.50 VSel=0 or VIO
nA
On-Leakage Current
of Port B0 and B1 (6)
On Leakage Current
of Port A (6)
Power Off Leakage
Current of Port A &
Port B(6)
Quiescent Supply
Current
Typ.
Max.
Unit
Min.
Off-Leakage Current
of Port B0 and B1 (6)
Min.
TA=-40 to +85°C
-2
2
-20
20
5.50
A=1V,4.5V
B0 or B1=4.5, 1V
-10
10
-50
50
3.60
A=1V,3.0V
B0 or B1=3.0, 1V
-10
10
-50
50
2.70
A=0.5V,2.3V
B0 or B1=2.3, 0.5V
-10
10
-50
50
1.95
A=0.3V,1.65V
B0 or B1=1.65 ,0.3 V
-5
5
-20
20
5.50
A=float
B0 or B1=4.5, 1V
-20
20
-100
100
3.60
A=float
B0 or B1=3.0, 1V
-10
10
-20
20
2.70
A=float
B0 or B1=2.3, 0.5V
-10
10
-20
20
1.95
A=float
B0 or B1=1.65, 0.3V
-5
5
-20
20
5.50
A=1V,4.5V; B0 or
B1=1V, 4.5V or floating
-20
20
-100
100
3.60
A=1V, 3.0VB0 or B1=1V,
3.0V or floating
-10
10
-20
20
2.70
A=0.5V, 2.3V, B0 or
B1=0.5V, 2.3V, or
floating
-10
10
-20
20
1.95
A=0.3V, 1.65V; B0 or
B1=0.3V, 1.65V, or
floating
-5
5
-20
20
0.01
1.00
-5.00
5.00
nA
nA
0
A=0 to 5.5V
B0 or B1=0 to 5.5V
5.50
VIN=0 or VCC, IOUT=0
10
50
500
3.60
VIN=0 or VCC, IOUT=0
1.0
25.0
100.0
2.70
VIN=0 or VCC, IOUT=0
0.5
20.0
50.0
1.95
VIN=0 or VCC, IOUT=0
0.5
15.0
50.0
-1.00
nA
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Electrical Characteristics
µA
nA
Continued on the following page…
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
4
All typical values are at 25°C unless otherwise specified. VIO=1.65 to 1.95V.
Symbol
RON
∆ RON
RFLAT(ON)
Parameter
Switch On
Resistance(3,6)
On Resistance
Matching
Between
Channels(4,6)
On Resistance
Flatness(5,6)
VCC (V)
Conditions
TA=+25°C
Min.
TA=-40 to +85°C
Typ.
Max.
Min.
Max.
4.50
IOUT=-100mA,
B0 or B1=2.5V
0.50
0.75
0.80
3.00
IOUT=-100mA,
B0 or B1=2.0V
0.75
0.90
1.2
2.25
IOUT=-100mA,
B0 or B1=1.8V
1.0
1.3
1.6
1.65
IOUT=-100mA,
B0 or B1=1.2V
2.5
5.0
7.0
4.50
IOUT=-100mA,
B0 or B1=2.5V
0.05
0.10
0.10
3.00
IOUT=-100mA,
B0 or B1=2.0V
0.10
0.15
0.15
2.25
IOUT=-100mA,
B0 or B1=1.8V
0.15
0.20
0.20
1.65
IOUT=-100mA,
B0 or B1=1.2V
0.15
0.40
0.40
4.50
IOUT=-100mA, B0 or
B1=1.0V, 1.5V, 2.5V
0.075
0.250
0.250
3.00
IOUT=-100mA,
B0 or B1=0.8V, 2.0V
0.1
0.3
0.3
2.25
IOUT=-100mA,
B0 or B1=0.8V, 1.8V
0.25
0.50
0.6
1.65
IOUT=-100mA,
B0 or B1=0.6V, 1.2V
3.5
Unit
Ω
Ω
Ω
Notes:
3. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch.
4. ∆ RON=RON maximum – RON minimum measured at identical VCC, temperature, and voltage.
5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the
specified range of conditions.
6. Guaranteed by characterization, not production tested for VCC=1.65 – 1.95V.
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Electrical Characteristics (Continued)
www.fairchildsemi.com
5
All typical value are at VIO=1.8V and VCC=1.8V, 2.5V, 3.0V, and 5.0V at 25°C unless otherwise specified.
Symbol
Parameter
VCC (V)
TA=+25ºC
Conditions
Min.
Typ.
Max.
Min.
Max.
1.0
12.0
25.0
1.0
30.0
5.0
15.0
30.0
3.0
35.0
5.0
20.0
35.0
5.0
40.0
1.65 to 1.95
10.0
50.0
70.0
10.0
75.0
4.50 to 5.50
1.0
9.5
20.0
1.0
25.0
1.0
9.0
20.0
1.0
25.0
2.0
10.0
20.0
2.0
25.0
1.65 to 1.95
2.0
28.0
40.0
2.0
50.0
4.50 to 5.50
1.0
10.0
12.0
0.1
14.0
1.0
14.0
16.0
1.0
17.0
1.0
21.0
25.0
1.0
27.0
2.0
50.0
4.50 to 5.50
tON
Turn-On Time(6)
3.00 to 3.60
2.30 to 2.70
3.00 to 3.60
tOFF
tBBM
Turn-Off Time(6)
Break-BeforeMake Time(6)
2.30 to 2.70
3.00 to 3.60
2.30 to 2.70
B0 or B1=VCC,
RL=50Ω,
CL=35pF
B0 or B1=VCC,
RL=50Ω,
CL=35pF
B0 or B1=VCC,
RL=50Ω,
CL=35pF
35.0
1.65 to 1.95
5.50
Q
TA=-40 to +85ºC
3.30
Charge Injection
2.50
Unit
Figure
ns
Figure 4
ns
Figure 4
ns
Figure 5
pC
Figure 7
47
CL=1.0nF,
VGEN=0V,
RGEN=0Ω
33
23
10
1.65
OIRR
Off Isolation
1.8 to 5.0
f=1MHz, RL=50Ω
-60
dB
Figure 6
Xtalk
Crosstalk
1.8 to 5.0
f=1MHz, RL=50Ω
55
dB
Figure 6
MHz
Figure 9
%
Figure 10
5.50
BW
-3db Bandwidth
3.30
2.50
60
60
RL=50Ω
55
1.65
THD
Total Harmonic
Distortion
1.80
5.00
50
RL=600Ω,
VIN=0.5VPP,
f=20Hz to 20kHz
.015
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
AC Electrical Characteristics
.002
Capacitance
Symbol
CIN
Parameter
Control Pin Input Capacitance
VCC (V)
Conditions
TA=+25ºC
Min.
Typ.
Max.
Unit
0
f=1MHz
3.2
pF
COFF
B Port Off Capacitance
1.65 to 5.50
f=1MHz
50
pF
CON
A Port On Capacitance
1.65 to 5.50
f=1MHz
150
pF
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
6
VCC
VBn
B0 or B1
tR = tF = 2.5ns
A
Control
Input
VOUT
RL
50
S
VCC
50%
0V
CL
35pF
tOFF
VOUT
Switch
Output
GND
0.9 x VOUT
0V
0.9 x VOUT
tON
CL includes fixture and stray capacitance.
Logic input waveforms inverted for switches
that have the opposite logic sense.
Figure 4. Turn On / Off Timing
VCC
VBn
B0
A
B1
VOUT
RL
50
S
Control
Input
Control
VCC
Input
0V
50%
tR = tF = 2.5ns
CL
35pF
0.9 x VOUT
VOUT
GND
TD
CL includes fixture and stray capacitance.
Figure 5. Break-Before-Make Timing
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Test Diagrams
VCC 10nF
Network
Analyzer
0 or VCC
S
VCC
A
BO
B1
50
GND
VIN
VOUT
50
MEAS
50
OFF-ISOLATION = 20log
VOUT
VIN
ON-LOSS = 20log
VOUT
VIN
CROSSTALK = 20log
VOUT
VIN
50
REF
50
Figure 6. Off Isolation and Crosstalk
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
7
VCC
RGEN
A
B0 or B1
VGEN
VOUT
CL
ΔVOUT
VOUT
In
S
GND
Control
Input
In
Off
On
Off
Off
On
Off
Q = ΔVOUT • CL
Figure 7. Charge Injection
10nF
VCC
A
S
Capacitance
Meter
f = 1MHz
B0 or
B1
0V
or
VCC
GND
Figure 8. On / Off Capacitance Measurement Setup
VCC
VCC
10nF
10nF
VIN
Signal
Generator
0dBm
VIN
A
BN
Analyzer
RL
A
BN
Signal
Generator
0dBm
Analyzer
RL
S
Logic Input
0V or VCC
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Test Diagrams (Continued)
S
Logic Input
0V or VCC
GND
Figure 9. Bandwidth
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
GND
Figure 10. Harmonic Distortion
www.fairchildsemi.com
8
F
E
BALL A1
INDEX AREA
A
B
0.03 C
2X
(Ø0.200)
CU PAD
D
(0.50)
A1
(0.50)
(Ø0.300)
SOLDER MASK
OPENING
0.03 C
2X
RECOMMENDED LAND PATTERN (NSMD)
TOP VIEW
0.06 C
0.625
0.547
E
0.05 C
C
D
0.378±0.018
0.208±0.021
SEATING PLANE
SIDE VIEWS
NOTES:
0.25
F
A. NO JEDEC REGISTRATION APPLIES.
(X) +/- 0.18
0.50
B. DIMENSIONS ARE IN MILLIMETERS.
8x Ø0.260±0.02
0.005
C. DIMENSIONS AND TOLERANCE
PER ASMEY14.5M, 1994.
C A B
D
0.25
C
1.50
D. DATUM C, THE SEATING PLANE IS DEFINED
BY THE SPHERICAL CROWNS OF THE BALLS.
B
A
0.50
1
E. PACKAGE NOMINAL HEIGHT IS 586 MICRONS
±39 MICRONS (547-625 MICRONS).
2
(Y) +/- 0.018
F. FOR DIMENSIONS D, E, X, AND Y SEE
PRODUCT DATASHEET.
BOTTOM VIEW
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
Physical Dimensions
G. BALL COMPOSITION: Sn95.5Ag3.9Cu0.6
H. DRAWING FILNAME: MKT-UC008ADrev2
Figure 11. 8-Ball, WLCSP 0.5mm Pitch
Table 1. Product Specific Dimensions
Product
D
E
X
Y
FSA859UCX
1.910
0.910
0.205
0.205
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
9
FSA859 — Dual-Voltage, 0.8Ω SPDT Analog Switch with Power-Off Isolation
© 2007 Fairchild Semiconductor Corporation
FSA859 Rev. 1.0.1
www.fairchildsemi.com
10