FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Description The FSA4159 is a high-performance Single-Pole / Double-Throw (SPDT) analog switch. The device features ultra-low RON of 1 at 4. 5V VCC and operates over the wide VCC range of 1.65 V to 5.50 V. The device is fabricated with sub-micron CMOS technology to achieve fast switching speeds and is designed for break-before-make operation. Low ICC When the S Input is Lower Than VCC Power-Off Isolation (VCC=0 V) 1 Ω On Resistance (RON) for 4.5 V VCC 0.25 Ω Maximum RON Flatness for 4.5 V VCC Space-Saving, Pb-Free, 6-Lead SC70 Surface Mount Package Broad VCC Operating Range: 1.65 V to 5.50 V Fast Turn-On and Turn-Of Times Break-Before-Make Enable Circuitry The FSA4159 features very low quiescent current even when the control voltage is lower than the V CC supply. This feature services mobile handset applications by allowing direct interface with baseband processor general-purpose I/Os. Pb-Free “Green” Packaging Applications Cellular Phone Portable Media Player PDA Ordering Information Part Number Operating Temperature Range Package Packing Method FSA4159P6X -40°C to +85°C 6-Lead SC70, EIAJ SC88, 1.25 mm Wide 3000 Units on Tape and Reel FSA4159L6X -40°C to +85°C 6-Lead MicroPak™, 1.00 mm Wide 5000 Units on Tape and Reel MicroPak™ is a trademark of Fairchild Semiconductor Corporation. B1 GND B0 S V CC A Figure 1. Analog Symbols © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation December 2013 B1 1 6 S GND 2 5 V CC B0 3 4 A Figure 2. SC70 Pin Assignments (Top View) S 1 6 B1 VCC 2 5 GND A 3 4 B0 Figure 3. MicroPak™ Pin Assignment (Top View) Pin Definitions Pin# SC70 Pin# MicroPak™ Name Description 1 6 B1 Data Ports 2 5 GND 3 4 B0 Data Ports 4 3 A Data Ports 5 2 VCC 6 1 S Ground Supply Voltage Control Input Truth Table Control Input (S) Function LOW B0 connected to A HIGH B1 connected to A © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Pin Configuration www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage (1) Min. Max. Unit -0.5 6.5 V -0.5 VCC + 0.5 V -0.5 6.5 V Vsw Switch Voltage VIN Input Voltage IIK Input Diode Current -50 mA ISW Switch Current (Continuous) 200 mA Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) 400 mA ISWPEAK PD TSTG (1) Power Dissipation at 85°C Storage Temperature Range -65 180 mW +150 °C TJ Max Junction Temperature +150 °C TL Lead Temperature (Soldering, 10 Seconds) +260 °C Human Body Model (JEDEC: JESD22-A114) 4000 Charged Device Model (JEDEC: JESD22-C101) 1500 Machine Model (JEDEC: JESD22-A115) 200 ESD V Note: 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol VCC Parameter Supply Voltage S Control Input Voltage VSW Switch Input Voltage (2) TA Operating Temperature JA Thermal Resistance, Still Air Min. Max. Unit 1.65 5.50 V 0 VCC V 0 VCC V -40 +85 °C 350 °C/W FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Absolute Maximum Ratings Note: 2. Control Input must be held HIGH or LOW; it must not float. © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 3 All typical values are at 25°C unless otherwise specified. Symbol VIH VIL Parameter Input Voltage High Input Voltage Low VCC (V) Conditions TA=+25°C Min. Typ. TA=-40 to +85°C Max. Min. 4.50 to 5.50 2.4 3.00 to 3.60 2.4 2.30 to 2.70 1.8 1.65 to 1.95 1.5 0.8 3.00 to 3.60 0.8 2.30 to 2.70 0.6 INO(0FF), INC(OFF) INO(On), INC(On) IA(ON) IOFF Control Input Leakage Off-Leakage Current of Port B0 and B1 On-Leakage Current of Port B0 and B1 On Leakage Current of Port A Power Off Leakage Current of Port A & Port B Unit V 4.50 to 5.50 1.65 to 1.95 IIN Max. V 0.6 5.50 VIN=0 or VCC -2 2 -100 100 3.60 VIN=0 or VCC -2 2 -100 100 2.70 VIN=0 or VCC -2 2 -20 20 1.95 VIN=0 or VCC -2 2 -20 20 5.50 A=1 V, 4.5 V, B0 or B1=4.5 C, 1.0 V -10 10 -50 50 3.60 A=1 V, 3.0 V, B0 or B1=3.0 V, 1.0 V -10 10 -50 50 2.70 A=0.5 V, 2.3 V, B0 or B1=2.3 V, 0.5 V -10 10 -50 50 1.95 A=0.3 V, 1.65 V, B0 or B1=1.65 V, 0.3 V -5 5 -20 20 5.50 A=Float, B0 or B1=4.5 V, 1.0 V -20 20 -100 100 3.60 A=Float, B0 or B1=3.0 V, 1.0 V -10 10 -20 20 2.70 A=Float B0 or B1=2.3 V, 0.5 V -10 10 -20 20 1.95 A=Float, B0 or B1=1.65 V, 0.3 V -5 5 -20 20 5.50 A=1 V,4.5 V B0 or B1=1 V, 4.5 V, or Floating -20 20 -100 100 3.60 A=1 V, 3 V, B0 or B1=1 V, 3 V, or Floating -10 10 -20 20 2.70 A=0.5 V, 2.3 V B0 or B1=0.5 V, 2.3 V, or Floating -10 10 -20 20 1.95 A=0.3 V, 1.65 V B0 or B1=0.3 V, 1.65 V, or Floating -5 5 -20 20 0 A=0 to 5.5 V B0 or B1=0 to5.5 V -5.00 5.00 nA nA nA FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Electrical Characteristics nA ±1.00 µA Continued on following page… © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 4 All typical values are at 25°C unless otherwise specified. Symbol RPEAK RON ∆ RON RFLAT(ON) ICC Parameter Peak On Resistance Switch On Resistance(3) On Resistance Matching Between Channels(4) On Resistance Flatness(5) Quiescent Supply Current VCC (V) Conditions TA=+25°C Min. TA=-40 to +85°C Typ. Max. Min. Max. 4.50 IOUT=-100 mA, B0 or B1=0 to VCC 1.0 1.1 1.3 3.00 IOUT=-100 mA, B0 or B1=0 to VCC 1.2 1.5 1.8 2.30 IOUT=-8 mA, B0 or B1=0 to VCC 1.5 2.0 2.5 1.65 IOUT=2 mA, B0 or B1=0 to VCC TA=25, 85°C 4.0 10.0 15.0 TA=-40°C 10.0 4.50 IOUT=-100 mA, B0 or B1=2.5 V 0.8 0.9 1.1 3.00 IOUT=-100 mA, B0 or B1=2.0 V 1.0 1.3 1.6 2.30 IOUT=-8 mA, B0 or B1=1.8 V 1.4 2.0 2.4 1.65 IOUT=-2 mA, B0 or B1=1.5 V 1.7 2.5 3.5 4.50 IOUT=-100 mA, B0 or B1=2.5 V 0.05 0.10 0.10 3.00 IOUT=-100 mA, B0 or B1=2.0 V 0.10 0.15 0.15 2.30 IOUT=-8 mA, B0 or B1=1.8 V 0.15 0.20 0.20 1.65 IOUT=-2 mA B0 or B1=1.5 V 0.15 0.40 0.40 4.50 IOUT=-100 mA, B0 or B1=1.0 V, 1.5 V, 2.5 V 0.075 0.250 0.250 3.00 IOUT=-100 mA, B0 or B1=0.8 V, 2.0 V 0.1 0.3 0.3 2.30 IOUT=-8 mA, B0 or B1=0.8 V, 1.8 V 0.2 1.0 1.0 1.65 IOUT=-2 mA, B0 or B1=0.6 V, 1.5 V 3.5 5.50 VIN=0 or VCC, IOUT=0 10.0 50.0 500.0 3.60 VIN=0 or VCC, IOUT=0 1.0 25.0 100.0 2.70 VIN=0 or VCC, IOUT=0 0.5 20.0 50.0 1.95 VIN=0 or VCC, IOUT=0 0.5 15.0 50.0 Unit Ω Ω Ω Ω FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Electrical Characteristics (Continued) nA Notes: 3. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 4. ∆ RON=RON maximum – RON minimum measured at identical VCC, temperature and voltage. 5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 5 All typical value are at VCC=1.8 V, 2.5 V, 3.0 V, 5.0 V at 25°C unless otherwise specified. Symbol Parameter VCC (V) TA=+25ºC Conditions Min. Typ. Max. Min. Max. 1 16 30 1 35 5 21 35 3 50 5 28 40 5 50 1.65 to 1.95 10 50 70 10 75 4.50 to 5.50 1 13 20 1 30 1 15 20 1 30 2 20 35 2 50 28 40 4.50 to 5.50 tON tOFF Turn-On Time Turn-Off Time 3.00 to 3.60 2.30 to 2.70 3.00 to 3.60 2.30 to 2.70 B0 or B1=VCC, RL=50 Ω, CL=35 pF B0 or B1=VCC, RL=50 Ω, CL=35 pF 1.65 to 1.95 2.0 4.50 to 5.50 tBBM Break-BeforeMake Time 3.00 to 3.60 2.30 to 2.70 B0 or B1=VCC, RL=50 Ω, CL=35 pF 2.0 1.65 to 1.95 3.30 Charge Injection 2.50 2 50 3.0 0.1 20.0 6.0 1.0 40.0 2.0 45.0 2.0 70.0 10.0 22.0 5.50 Q TA=-40to+85ºC 35.0 Unit Figure ns Figure 11 ns Figure 11 ns Figure 12 pC Figure 14 15 CL=1.0 nF, VGEN=0 V, RGEN=0 Ω 11 8 1.65 6 OIRR Off Isolation 1.80 to 5.00 f=1 MHz, RL=50 Ω -60 dB Figure 13 Xtalk Crosstalk 1.80 to 5.00 f=1 MHz, RL=50 Ω -60 dB Figure 13 MHz Figure 7 Figure 8 Figure 16 % Figure 10 Figure 17 5.50 BW -3db Bandwidth 3.30 2.50 180 180 RL=50 Ω 180 1.65 1.80 THD Total Harmonic Distortion 5.00 180 RL=600 , VIN=0.5 VPP, f=20 Hz to 20 kHz .006 .002 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation AC Electrical Characteristics Capacitance Symbol Parameter CIN Control Pin Input Capacitance VCC (V) Conditions TA=+25ºC Min. Typ. Max. Unit 0 f=1 MHz, See Figure 10 1.5 pF COFF B Port Off Capacitance 1.65 to 5.50 f=1 MHz, See Figure 10 12 pF CON A Port On Capacitance 1.65 to 5.50 f=1 MHz, See Figure 10 41 pF © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 6 Figure 4. Switch RON (VCC=4.5 V) FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Typical Performance Characteristics Figure 5. Switch RON (VCC=3.0 V) Figure 6. Switch RON (VCC=2.3 V) © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 7 Freqency Response 1 10 100 1000 10000 0 -1 Gain (dB) -2 -3 -4 -5 -6 -7 -8 Frequency (MHz) CL = 0pF Figure 7. Frequency Response (CL=0 pF, VCC=5.5 V) VCC = 5.5V 1 10 Freqency Response 100 1000 0 -1 10000 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Typical Performance Characteristics (Continued) Gain (dB) -2 -3 -4 -5 -6 -7 -8 Frequency (MHz) CL = 0pF VCC = 3.3V Figure 8. Frequency Response (CL=0 pF, VCC=3.3 V) © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 8 Off Isolation (dB) 0 1 10 100 -10 -30 -50 -70 -90 Frequency (MHz) Figure 9. Off Isolation (VCC=5.0 V) 10 100 1000 0.007 0.006 THD (%) 0.005 10000 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Typical Performance Characteristics (Continued) 0.004 0.003 0.002 0.001 0.000 Frequency (MHz) THD,V CC=1.8V THD, V CC=5.0V Figure 10. Total Harmonic Distortion, Frequency Response (CL=0 pF) © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 9 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Test Diagrams Figure 11. Turn On / Off Timing Figure 12. Break-Before-Make Timing VCC 10nF Network Analyzer 0 or VCC S VCC A BO B1 50 GND VIN VOUT 50 MEAS 50 OFF-ISOLATION = 20log VOUT VIN ON-LOSS = 20log VOUT VIN CROSSTALK = 20log VOUT VIN 50 REF 50 Figure 13. Off Isolation and Crosstalk © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 10 Figure 14. Charge Injection FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Test Diagrams (Continued) Figure 15. On / Off Capacitance Measurement Setup Figure 16. Bandwidth © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 Figure 17. Harmonic Distortion www.fairchildsemi.com 11 SYMM C L 2.00±0.20 0.65 A 0.50 MIN 4 6 B PIN ONE 1.25±0.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.10±0.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH. D) DRAWING FILENAME: MKT-MAA06AREV6 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Physical Dimensions 30° 0° 0.46 0.26 DETAIL A SCALE: 60X Figure 18. 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package : Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/MA/MAA06A.pdf. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-MAA06A.pdf. © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 12 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.254) (0.49) 5X 1.00 (0.75) PIN 1 IDENTIFIER 5 (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL (0.13) 4X FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation Physical Dimensions (Continued) Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 4. FILENAME AND REVISION: MAC06AREV4 5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY OTHER LINE IN THE MARK CODE LAYOUT. Figure 19. 6-Lead, MicroPak™ 1.0mm Wide Package Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/MA/MAC06A.pdf. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-MAC06A.pdf. © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 13 FSA4159 — Low-Voltage, 1 SPDT Analog Switch with Power-Off Isolation © 2007 Fairchild Semiconductor Corporation FSA4159 • Rev. 1.0.6 www.fairchildsemi.com 14