EXTreme ZPower™ Connector 10.30mm (.405”) Parallel Board Spacing FEATURES AND SPECIFICATIONS The EXTreme ZPower™ Connector utilizes a unique, interface for mezzanine style power connections. Anchored to the base board with press-fit power pins, the top board is screwed securely down from the top. EXTreme ZPower™ not only transfers power between boards, but can double as an effective stand-off. Available with both 30.0 and 50.0A versions, EXTreme ZPower™ can be used in a variety of applications and industries where power connection between parallel boards or bus bars is necessary in a condensed space. Features and Benefits n Patented internal terminal design allows a rigid, secure interface while helping to isolate press-fit pins from the load of shock and vibration n Screw-contact interface can accept standard wire-crimp, ring-lug terminals for wire-to-board applications (Tin plating for use with ring lug terminal connection) 76001 Series n Captured internal nut for ease of assembly n High normal force, high-reliability interface n One piece ridged board-to-board high current interconnect n Hertzian (high-pressure) contact areas create a reliable (gas-tight) mating surface SPECIFICATIONS Reference Information Packaging: Tray CSA/CUS File No.: 1792321 Designed In: Millmeters Mechanical Insertion Force to PCB: 9.07N (20lbf) per tail Recommended Torque: 0.75 N-m (6.6 inch-lbs) Durability: 5 cycles mate/un-mate (separable interface) Electrical Voltage: 250V max Current (@ 30°C Temperature rise): 10 Circuit – 50.0A max. 6 Circuit – 30.0A max. Contact Resistance (per blade): Initial Documents Sales Drawings: 50 ampere: SD-76001-001 30 ampere: SD-76001-002 Product Spec: PS-76001-999 Application Spec: AS-76001-001 Physical Housing: LCP Contact: Copper (Cu) Alloy Plating: Contact Area — 30µ” Gold min. or 100µ” Select Matte Tin min. Solder Tail Area — 100µ” Select Matte Tin min. Underplating — 50µ” Nickel min. Flammability Rating: UL 94V-0 End of Life Power (milliohms) – 0.15 0.10 max. Change Dielectric Withstanding Voltage: 1500V DC Insulation Resistance: 5000 Megaohms min. ORDERING INFORMATION Series* Description Current 76001 10 Tail Connector 50.0A 76001 6 Tail Connector 30.0A Plating Mating PCB Thickness Press-Fit PCB Thickness Gold or Tin 0.063” 0.093” 0.125” 0.093” min. *Complete part numbers can be found at www.molex.com/link/ext-power.html EXTreme ZPower 10 Tail T-Rise T-Rise - (Deg °C) 50 45 1 Connector 40 10 Connectors 35 25 Connectors 30 25 20 15 10 5 0 0.0 10.0 20.0 30.0 40.0 50.0 Current (Amps) 60.0 70.0 80.0 EXTreme Power® Products FEATURES AND SPECIFICATIONS EXTreme Power® Products The need for high-current power interconnect solutions in increasingly smaller space continues to rise rapidly. Solving this power equation on new architectures and system platforms has been a major focus for Molex product development teams. The new Molex EXTreme Power® family of products is the direct result of listening intently to our customers’ electrical and mechanical design challenges. Since no two applications are the same, the Molex EXTreme Power® offering is comprised of several product families that cover a wide range of current densities, mechanical envelopes, mating terminations and configuration choices that give system designers the ability to maximize their power interconnect needs. 150.0 A / Blade 372.0 A / Sq. in. 58.0 A / Sq. cm 60.0 A / Blade 705.0 A / Sq. in. 109.0 A / Sq. cm 30.0 A / Blade 431.0 A / Sq. in. 67.0 A / Sq. cm 30.0 A / Blade 203.0 A / Sq. in. 31.0 A / Sq. cm 40.0 A / Blade 445.0 A / Sq. in. 68.0 A / Sq. cm 16.0 A / Blade 618.0 A / Sq. in. 96.0 A / Sq. cm 50.0 A / Contact 215.0 A / Sq. in. 33.0 A / Sq. cm 25.00mm 10.00mm 7.50mm 14.58mm 15.00mm EXTreme PowerMass™ 4.00mm 10.00mm EXTreme Ten60Power™ EXTreme LPHPower™ EXTreme PowerEdge™ EXTreme PowerPlus™ (SSI) EXTreme MicroPower™ EXTreme MicroPower™ www.molex.com/link/ext-power.html Order No. 987650-3008 USA/KC/2009.03 © 2009, Molex