Introduction Your Complete IDC Connector Source AVX is approved by B.S.I. to B.S.E.N. ISO 9001 to manufacture a broad line of popular IDC connector configurations for a wide variety of applications: • • • • • • • • Telecommunications Computers & Peripherals Consumer & Business/Office Equipment Robotics Terminals Appliances Automotive Electronics Military & Aerospace Equipment And any other cable-to-board, board-to-board and cableto-cable interface on 0.050" - (1.27mm) and 0.100" (2.54mm) spacing! 2 BENEFITS OF FLAT CABLE MASS TERMINATION • Space efficient and easy to route in tight enclosures • Easy, fast and reliable termination, with controlled centerline spacing • Reliable coplanarity provides accurate spacing from #1 to last conductor • No need for wire stripping, prepping or soldering • Operators easily trained, to achieve minimal error or variability Your Complete IDC Connector Source IDC FOR 0.050" (1.27mm) ROUND CONDUCTOR FLAT CABLE No. of Positions Socket Header Latched Series 8290 Series 8289 4 6 8 9 10 12 14 15 16 20 24 25 26 30 32 34 36 37 40 44 50 52 56 60 64 Accessories Strain Relief Coding Key Polarizing Key Latch / Eject Tooling Base Plate Options PCB Retention Available 䊉 Low Profile Header Series 8380 Card Edge Series Series 8383 6338 High Temp. 2 Row Transition 4 Row Transition Male Plug IDC DIN 41612 Series 8399 Series 8292 Series 8293 Series 8459 䊉 䊉 䊉 䊊 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊉 䊊 䊊 䊉 䊉 䊊 䊊 䊉 䊉 䊊 䊊 䊉 䊉 䊉 䊉 䊉 䊊 䊊 䊊 䊊 䊊 䊊 Consult Sales 䊊 IDC FOR 0.100" (2.54mm) ROUND CONDUCTOR FLAT CABLE No. of Positions Socket Header 8 14 16 18 20 24 Series 8284 䊉 䊉 䊉 䊉 䊉 䊉 Series 8284 䊉 䊉 䊉 䊉 䊉 䊉 COMPATIBILITY & APPROVALS • UL • CSA • Intermateable and interchangeable with many other manufacturers • Compatible with MIL-83503 product 3 Introduction Your Complete IDC Connector Source ADVANCED DESIGN & QUALITY • Contact design pierces the cable insulation, providing a reliable gas-tight termination, with positive electrical characteristics • Contacts accommodate solid or stranded wire • Single beam contact face makes early contact with mating pin to give maximum contact wipe • Industry-standard P.C.B. footprints provide easy circuit routing and efficient use of board real estate • Popular header variations, such as press-fit, straight (vertical) and right-angle (horizontal) through-hole, for a variety of board thicknesses • Headers in 4-wall configurations for pin protection 4 A FULL RANGE OF FEATURES AND ACCESSORIES • Lock & ejects that can accommodate sockets with or without strain relief mechanisms, to avoid stressing cable terminations • Feed-through or closed-end sockets accommodate daisy chain or cable-end applications • Ridged covers and marked #1 contact positions that provide accurate cable to contact alignment • S.M.T. header styles molded in high thermal resistant material • IDC connectors are available in packaging designed for automated cable or P.C.B. assembly