G Indicators Complement to G Switches TYPICAL INDICATOR ORDERING EXAMPLE P G01 C DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Red LED G01PC PC TERMINALS LED COLORS P Straight C Red V Vertical E Yellow F Green Straight PC Terminals LED COLORS & SPECIFICATIONS C E F Red Yellow Green LED is colored in OFF state Color Forward Peak Current I FM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 2.0V 2.0V 2.1V Reverse Peak Voltage VRM 5V 5V 5V Current Reduction Rate Above 25°C ∆I F 0.40mA/°C 0.40mA/°C 0.40mA/°C Ambient Temperature Range –25°C ~ +85°C Electrical specifications are determined at a basic temperature of 25°C. If the source voltage is greater than the LED’s rated voltage, a ballast resistor must be connected in series with the LED. That ballast resistor value can be calculated by using the formula shown in the Supplement section. TYPICAL INDICATOR DIMENSIONS Straight PC (3.0) Dia .118 (4.0) Dia .157 LED + Mark (7.0) .276 Slot (4.5) .177 (2.0) .079 (1.6) .063 (7.0) .276 (0.5) Sq Typ .020 (2.54) .100 (0.8) Dia Typ .031 (1.27) Typ .050 (20.0) Min .787 G01PC Vertical PC (3.0) Dia .118 (4.0) Dia .157 LED + Mark (0.4) .016 (7.4) .292 (15.5) Min .610 Slot (2.54) .100 G01VC (5.3) .209 (0.4) Dia Typ .016 (1.6) .063 (2.0) .079 (5.08) .200 (7.68) .302 (0.5) Sq Typ .020 (1.27) Typ .050 (2.6) .102 (2.54) .100 (5.08) .200 (0.8) Dia Typ .031 (4.5) .177 These indicators have anode and cathode terminals along with 2 support pins. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07