High Capacity Standard Size Toggles Series S GENERAL SPECIFICATIONS FOR S800s ~ S732 Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: 10 milliohms maximum 1,000 megohms minimum @ 500V DC 2,000V AC minimum for 1 minute minimum for S800s & S800Ds 3,000V AC minimum for 1 minute minimum for S732 50,000 operations minimum 10,000 operations minimum for S800Ds 25,000 operations minimum for S800s & S732 Materials & Finishes Toggle: Bushing: Case: Case Cover: Movable Contactor Plate: Movable & Stationary Contacts: Common Terminals: Contact Terminals: Brass with nickel plating for S732 Brass with chrome plating for S800s & S800Ds Brass with chrome plating Phenolic resin for S732; melamine phenol for S800s Steel with chromate plating over zinc plating Copper with silver plating Silver alloy capped on copper with silver plating Brass Brass with silver or nickel plating Environmental Data Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Installation Mounting Torque: Maximum Panel Thickness: 2.94Nm (26 lb•in) for double nut Shown beneath panel cutout in switch dimension drawings Standards & Certifications UL Recognized: C-UL Recognized: CSA Certified: Designated with UL recognized symbol beside part numbers on following pages See Supplement section to find UL rating details. UL File No. WOYR2.E44145 Add “/U” to end of part number to order UL mark on switch. Designated with C-UL recognized symbol beside part numbers on following pages See Supplement section to find C-UL rating details. C-UL File No. WOYR8.E44145 Add “/C-UL” to end of part number to order C-UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages See Supplement section to find CSA rating details. File No. 023535-0-000 Add “/C” to end of part number to order CSA mark on switch. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series S High Capacity Standard Size Toggles DOUBLE POLE WITH SCREW LUG Electrical Capacity Toggle Position/Connected Terminals Down Center Up Resistive Motor Load Inductive Keyway Model Pole & Throw Approvals S821 S822 S823 R R R R R R AC 250V DC 30V DC 125V AC 125V PF 0.6 AC 250V PF 0.6 AC 125V DPST ON 2-3 5-6 NONE OFF 30A 30A 30A 1A 30A 15A 750W DPDT ON 2-3 5-6 NONE ON 2-1 5-4 30A 30A 30A 1A 30A 15A — DPDT ON 2-3 5-6 OFF ON 2-1 5-4 30A 30A 30A 1A 30A 15A — 2 Throw & Schematics: AC 125V (COM) — 5 2 DPST 5 (COM) Note: Terminal numbers are on the switch DPDT 3 3 6 1 6 4 • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. M4.5x6 Keyway M12 P1 6 3 (12.5) Dia .492 (42.0) 1.654 28° (12.0) Typ .472 5 4 (9.0) .354 2 1 (3.0) Dia .118 (6.1) Dia .240 (12.0) .472 (22.0) .866 (12.0) .472 (24.0) .945 (34.0) 1.339 S822 S821 does not have terminals 1 & 4 Maximum Panel Thickness: .177” (4.5mm) THREE POLE WITH SCREW LUG Electrical Capacity Toggle Position/Connected Terminals Down Model S831 S832 S833 Throw & Schematics: Pole & Throw Approvals R R R R R R Center Resistive Up Keyway Inductive AC 125V AC 250V DC 30V DC 125V AC 125V PF 0.6 AC 250V PF 0.6 3PST ON 2-3 5-6 8-9 NONE OFF — 30A 30A 30A 1A 30A 15A 3PDT ON 2-3 5-6 8-9 NONE ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A 3PDT ON 2-3 5-6 8-9 OFF ON 2-1 5-4 8-7 30A 30A 30A 1A 30A 15A 2 3PST 3 5 (COM) 8 9 6 2 3PDT 3 5 1 6 (COM) 4 8 9 Note: Terminal numbers are on the switch 7 • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. M4.5x6 Keyway M12 P1 6 3 9 (12.5) Dia .492 (42.0) 1.654 28° (12.0) Typ .472 (9.0) .354 5 8 7 2 1 (3.0) Dia .118 4 (6.1) Dia .240 (14.5) Typ .571 (22.0) .866 S833 (12.0) .472 (34.0) 1.339 (43.0) 1.693 S831 does not have terminals 1, 4 & 7 Maximum Panel Thickness: .177” (4.5mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series S High Capacity Standard Size Toggles DOUBLE & THREE POLE WITH SCREW LUG & FLATTED LEVER Electrical Capacity Toggle Position/Connected Terminals Down Model Approvals S821D S822D S823D R R R R R R S832D S833D Center R R R R Throw & Schematics: DC 125V DC 250V DC 24V DC 48V DC 125V DC 250V 30A 30A 15A 7.5A 15A 10A 6A 3A 2-3 5-6 NONE OFF DPDT ON 2-3 5-6 NONE ON 2-1 5-4 30A 30A 15A 7.5A 15A 10A 6A 3A DPDT ON 2-3 5-6 OFF ON 2-1 5-4 30A 30A 15A 7.5A 15A 10A 6A 3A 5 2 5 (COM) Note: Terminal numbers are on the switch DPDT 3 R DC 48V ON (COM) — Inductive L/R = 3ms DC 30V DPST DPST R Resistive Up Keyway 2 Throw & Schematics: S831D Pole & Throw 3 6 3PST ON 2-3 5-6 8-9 NONE OFF 3PDT ON 2-3 5-6 8-9 NONE 3PDT ON 2-3 5-6 8-9 OFF 2 5 (COM) — 9 6 4 30A 15A 7.5A 15A 10A 6A 3A ON 2-1 5-4 8-7 30A 30A 15A 7.5A 15A 10A 6A 3A ON 2-1 5-4 8-7 30A 30A 15A 7.5A 15A 10A 6A 3A 2 3PDT 3 6 30A 8 3PST 1 3 5 1 6 (COM) 4 8 9 Note: Terminal numbers are on the switch 7 • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Double Pole Keyway M4.5x6 M12 P1 6 3 28° (12.0) Typ .472 (4.0) .157 (12.5) Dia .492 (42.0) 1.654 5 4 (9.0) .354 2 1 (3.0) Dia .118 (8.15) .321 (12.0) .472 (9.0) .354 (27.0) 1.063 (12.0) .472 (24.0) .945 (34.0) 1.339 S821D does not have terminals 1 & 4 Maximum Panel Thickness: .177” (4.5mm) Three Pole Keyway 6 3 9 (42.0) 1.654 5 8 7 2 1 4 (14.5) Typ .571 (9.0) .354 S832D (43.0) 1.693 S831D does not have terminals 1, 4 & 7 Positive (+) must be connected to end terminals & negative to common terminals NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 High Capacity Standard Size Toggles Series S DOUBLE POLE WITH SCREW LUG Electrical Capacity Toggle Position/Connected Terminals Down Model Approvals S732 — Pole & Throw — DPDT Resistive Up Keyway ON 2-3 5-6 2 Throw & Schematics: Center NONE ON 2-1 5-4 Inductive AC 125V AC 250V DC 30V AC 125V PF 0.6 50A 30A 50A 25A 5 (COM) Note: Terminal numbers are on the switch DPDT 3 1 6 4 • Standard Hardware: AT503M Face Hex Nut, AT506 Locking Ring, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. Keyway M4 x 10 M6 x 8 M12 P1 6 3 5 2 4 1 (17.0) Typ .669 (50.0) 1.969 32° (60.0) 2.362 (10.0) Dia .394 (38.0) 1.496 (29.5) 1.161 (10.0) .394 (39.0) 1.535 (18.0) .709 Cap of phenolic resin is black Panel Mount with Mounting Screws (4.5) Dia Typ .177 (12.5) Dia .492 (25.0) Typ .984 Maximum Panel Thickness: .158” (4.0mm) Panel Mount with Bushing Hardware (12.5) Dia .492 (12.5) Dia .492 (9.0) .354 (3.0) Dia .118 S732 Maximum Panel Thickness: .079” (2.0mm) (11.5) .453 (12.5) Dia .492 Maximum Panel Thickness: .118” (3.0mm) (1.5) .060 Maximum Panel Thickness: .118” (3.0mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07