MODULES 4000 Series 1 0 W - 3 3 K V S I N G L E O U T P U T D C / D C I N D U S T R I A L Features • • • • • • • 0 to 100% adjustability. Voltage programmable. Voltage monitor. Remote on/off control. EMI/RFI shielding. Short circuit, reverse polarity protection. Arc protection. Specifications Selection Tables INPUT Voltage +24Vdc (+20% to -5%). OUTPUT Power 10W. MODEL NUMBER OUTPUT OUTPUT*1 VOLTAGE CURRENT 4010 0 to 1,000V 10mA 0.1% 4020 0 to 2,000V 5mA 0.1% 4030 0 to 3,000V 3.3mA 0.2% 4050 0 to 5,000V 2mA 0.1% 4070 0 to 7,000V 1.4mA 0.1% 1mA 0.1% RIPPLE Voltage See table. Current See table. Ripple See table. 4100 0 to 10,000V Analog control 0 to 10 Volts = 0 to 100% output. 4120 0 to 12,000V 0.8mA 0.1% Voltage monitor 0 to 10 Volts = 0 to 100% output.. 4150 0 to 15,000V 0.67mA 0.1% On/Off control On = 0 Volts or N.C. Off = 5 Volts 4200 0 to 20,000V 0.5mA 0.2% 4300*2 0 to 30,000V 0.33mA 0.4% 4330*2 0 to 33,000V 0.30mA 0.2% Reference output 10 Volts (±0.5%). ENVIRONMENTAL Operating temperature –10°C to +60°C. Note: 1. At maximum rated output voltage. 2. No voltage monitor. GENERAL PIN# FUNCTION 1 On/Off control 2 Ground/case Fully encapsulated. 3 +24Volt input Case material Black anodised aluminum. 4 10 Volt reference output Input connector Molex 09-50-3071 (supplied). 5 Programming voltage 6 Internal potentiometer 7 Voltage monitor Dimensions 104 x 78.7 x 35.56 mm (4010 to 4200). 104 x 91.4 x 35.56 mm (4300 to 4330). Weight 675g. Packaging Molex pins 08-50-0106 (supplied). High voltage leads 30KV 22AWG (4010 to 4200). 40KV 20AWG (4300 to 4330). OPTIONS Negative output voltage PROGRAMMING VOLTAGE Apply 0-10V to pin 5 for 0-100% output. RESISTANCE Connect potentiometer to pin 4 (reference voltage), connect wiper arm to pin 5, and connect potentiometer to the ground. Put “N” after model (eg 4300N). MANUAL 222 Connect pin 6 to pin 5, turn front panel pot for voltage adjust.