SEMTECH LC01-6.TD

LC01-6
Low Capacitance TVS for High-Speed
Telecommunication Systems
PROTECTION PRODUCTS
Description
Features
‹ 1500 watts peak pulse power (tp = 10/1000µs)
‹ Transient protection for high speed data lines to
The LC01-6 transient voltage suppressor is designed to
protect components which are connected to high
speed telecommunication lines from voltage surges
caused by lightning, electrostatic discharge (ESD), and
electrical fast transients (EFT).
TVS diodes are ideal for use as board level protection
of sensitive semiconductor components. The LC01-6
is designed for metallic mode, secondary line side
protection in digital line card applications. It features
solid-state silicon-avalanche technology for unmatched
transient protection without device degradation. The
LC01-6 combines TVS diodes with low capacitance
compensation diodes to provide an integrated, low
capacitance protection solution. Additional features
include sub-nanosecond response time, a low operating voltage of 6 volts, and low clamping voltage.
‹
‹
‹
‹
‹
IEC 61000-4-2 (ESD), ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT), 40A (5/50ns)
IEC 61000-4-5 (Lightning), 95A (8/20µs)
Bellcore 1089 (Outer-Building),
100A (10/1000µs), 500A (2/10µs)
FCC Part 68, 200A (10/160µs)
ITU K.21, 100A (5/310µs)
ITU K.20, 200A (5/310µs)
Differential protection for one Tip and Ring line pair
Low capacitance for high speed interfaces
Low operating and clamping voltage
Integrated structure saves board space and
increases reliability
Solid-state silicon-avalanche technology
Mechanical Characteristics
The LC01-6 is suitable for use on T1/E1 and xDSL
interfaces in equipment such as base stations, routers,
and channel service units. The LC01-6 meets the longhaul (outer-building) transient immunity requirements
of Bellcore 1089, FCC Part 68 (Type A and B surges),
ITU K.20 and K.21, and IEC 61000-4-5.
‹
‹
‹
‹
‹
JEDEC SO-16W package
UL 497B listed
Molding compound flammability rating: UL 94V-0
Marking : Part number, date code, logo
Packaging : Tube or Tape and Reel per EIA 481
Applications
‹
‹
‹
‹
‹
Circuit Diagram
T1/E1 Line Cards
Base Stations
WAN Interfaces
xDSL Interfaces
CSU/DSU Equipment
Schematic & PIN Configuration
SO-16W (Top View)
Revision 04/14/04
1
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Absolute Maximum Rating
R ating
Symbol
Value
Units
Peak Pulse Power (tp = 10/1000µs)
Pp k
1500
Watts
Peak Pulse Current (tp = 10/1000µs)
IP P
100
A
Peak Pulse Current (tp = 10/160µs)
IP P
200
A
Thermal Resistance Junction to Case
θJ C
30
°C/W
Thermal Resistance Junction to Ambient
θJ A
95
°C/W
Lead Soldering Temperature
TL
260 (10 sec.)
°C
Operating Temperature
TJ
-55 to +125
°C
TSTG
-55 to +150
°C
Storage Temperature
Electrical Characteristics
LC01-6
Parameter
Symbol
Conditions
Minimum
Typical
Maximum
Units
6
V
Reverse Stand-Off Voltage
VRWM
Reverse Breakdown Voltage
V BR
It = 1mA
Reverse Leakage Current
IR
VRWM = 6V, T=25°C
25
µA
Clamp ing Voltage
VC
IPP = 100A
tp = 10/1000µs
15
V
Clamp ing Voltage
VC
IPP = 200A
tp = 10/160µs
16
V
Temp erature Coefficient of
Breakdown Voltage
Junction Cap acitance
 2004 Semtech Corp.
αTVBR
Cj
8
V
3
VR = 0V, f = 1MHz
2
mV/°C
50
pF
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Typical Characteristics
Non-Repetitive Peak Pulse Power vs. Pulse Time
Power Derating Curve
100
110
90
% of Rated Power or IPP
Peak Pulse Power - Ppk (kW)
100
10
80
70
60
50
40
30
20
10
1
0
0.1
1
10
100
1000
0
25
50
Pulse Duration - tp (µs)
Pulse Waveform
80
e -t
60
50
td = I PP /2
30
20
175
10
8
6
Waveform
Parameters:
tr = 10µs
td = 1000µs
4
2
10
0
0
0
10
1000
0
3000
10
20
30
40
50
60
70
80
90
100
110
Peak Pulse Current - IPP (A)
T im e (µs)
Capacitance vs. Reverse Voltage
AC Power Dissipation
41.5
6
Pins 1-8 tied together
Pins 9 - 16 tied together
f = 1MHz
41
5
40.5
4
Power (w)
Capacitance - Cj (pF)
150
12
Clamping Voltage - VC (V)
90
Percent of IPP
125
14
W aveform
Parameters:
tr = 10µs
td = 1000µs
100
40
100
Clamping Voltage vs. Peak Pulse Current
110
70
75
Ambient Temperature - TA (oC)
40
3
39.5
2
39
1
38.5
0
0
1
2
3
4
5
6
1
Reverse Voltage - VR (V)
 2004 Semtech Corp.
10
100
1000
Time (s)
3
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of HighSpeed Data Lines
The LC01-6 is designed to protect high-speed data
lines from transient over-voltages which result from
lightning and ESD. The device is designed to protect
one line pair in differential (Line-to-Line) mode. Pins 18 are connected to line 1 and pins 9-16 are connected
to line 2 as shown. All pins should be connected for
best results.
T1/E1 Linecard Protection
A typical long-haul T1/E1 linecard protection circuit is
shown below. The LC01-6 is connected between Tip
and Ring on the transmit and receive line pairs. It
provides protection to metallic (line-to-line) lightning
surges per Bellcore 1089 and FCC Part 68. Depending
on the application, a high voltage crowbar device (not
shown) such as a gas discharge tube (GDT) or TVS
Thyristor may be used to suppress common mode (lineto-ground) surges. To complete the protection circuit,
the SRDA05-4 (or SRDA3.3-4 for 3.3V supplies) is
employed as the secondary IC side protection element.
This device helps prevent the transceiver from latching
up by providing fine clamping of transients that are
coupled through the transformer. Positive temperature
coefficient (PTC) resistors or fuses are also required for
AC power cross protection. For further information,
reference Semtech application note AN97-10.
Figure 1 - Schematic and Pin Configuration
Figure 2 - Connection for Differential Protection
(Line-to-Line)
 2004 Semtech Corp.
4
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Typical Applications
T1/E1 Line Card Protection (Long-Haul Applications)
SDSL Protection
 2004 Semtech Corp.
5
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Outline Drawing - SO-16W
Land Pattern - SO-16W
 2004 Semtech Corp.
6
www.semtech.com
LC01-6
PROTECTION PRODUCTS
Ordering Information
Par t
Number
Working
Voltage
Qty per
Reel
R eel Size
LC01-6.TD
6V
1000
13 Inch
Note:
(1) No suffix indicates tube pack.
Contact Information
Semtech Corporation
Protection Products Division
200 Flynn Rd., Camarillo, CA 93012
Phone: (805)498-2111 FAX (805)498-3804
 2004 Semtech Corp.
7
www.semtech.com