RICHCO OFD-C-6-05

FIBER MANAGEMENT
OFSRG
Description
The Optical Fiber Strain Relief Gland enables
ruggedized patch cords, or fiber bundles,
protected in OFBLT to be anchored to a
chassis, or distribution trunking system, by
the simple provision of a single hole.
Optical Fiber Strain Relief Gland
The OFBLT is passed through the gland and
is secured by the integral Tube Gripper Clip.
This ensures a pull out resistance of over
100N while still ensuring a 30mm radius
bend control and crush protection.
Features
• OFBLT retention: >100N
• Mid point or end termination of
OFBLT
• Provides secure fixing
Part No.
OFSRG-05-BLK
Ø ”D”
.59 (15.0)
Miniflex technology manufactured by Richco - Patented
Material: PVC • Color: Black
Standard Pack: 10/bag
Ø ”d1”
Ø “d2”
Ø ”A”
.20 (5.0)
.47 (12.0)
.43 (11.0)
“H”
“W”
1.46 (37.0)
0.12 (3.0)
Description
OFD
The Optical Fiber Duplexer enables cables with aramid strands to be broken out and mechanically terminated. It
provides an easy-to-use assembly with no crimping, while still retaining a minimum of a 100N pull. Used with the
5mm diameter OFBLT at the output port, it gives full blend control and crush protection for ongoing fibers. The
Duplexer gives an easy-to-use lay through facility with internal fiber radius control.
Optical Fiber Duplexer
The Duplexer gives a range of input adapters to cover OFBLT, fiber bundles, cable and patch cords from
2.5mm to 7.00mm in diameter. For cables up to 10.8mm in diameter, a rubber sleeve is provided. See cable
size chart below.
Part Number
“L“
“W“
“w“
“H“
“d“
OFD series
1.95 (49.6)
0.64 (16.2)
0.52 (13.2)
0.31 (8.0)
0.20 (5.0)
Miniflex technology manufactured by Richco - Patented
Material: Flame Retardant Nylon, RMS-19 (UL 94V0); Color: Black
Standard Pack: 10/bag
Part Number
Incoming Cable Size Diameter
Adapter Color
Features
• Tube retention: >100N
• For a Development Kit containing
all adapters, order:
OFD-C-05-19BLK
OFD-C-1-05-19BLK
OFD-C-2-05-19BLK
OFD-C-3-05-19BLK
OFD-C-4-05-19BLK
OFD-C-5-05-19BLK
OFD-C-6-05-19BLK
OFD-C-9-05-19BLK
OFD-C-7-05-19BLK
OFD-C-8-635-19BLK
.098 - .138 (2.5 - 3.5)
.118 - .157 (3.0 - 4.0)
.161 - .197 (4.1 - 5.0)
.200 - .236 (5.1 - 6.0)
.240 - .276 (6.1 - 7.0)
.280 - .335 (7.1 - 8.5)
.335 - .425 (8.5 - 10.8)
.197 (5.0) OFBLT
.250 (6.35) OFBLT
Black
Blue
Brown
Green
Red
Black Rubber
Black Rubber
Split Black
Split Blue
OFCPA
Optical Fiber Cable and
Patch Cord Anchor
J
Features
• OFBLT retention: >100N
• The OFCPA can also be used as a
tube to tube uniter from OFBLT to
OFBLT
• For a Development Kit containing
all adapters order:
OFCPA-05-19BLK
206
Description
The Optical Fiber Cable and Patch Cord Anchor enables cables with aramid strands or similar strength
reinforcement to be mechanically terminated. It provides an easy-to-use assembly with no crimping, while still
retaining a minimum of 100N pull out. Up to 4 patch cords Ø2.5mm can be terminated in one anchor.
Part Number
“D” Ø
“A”
“d” Ø
“L”
OFCPA series
.51 (13.0)
.31 (8.0)
.20 (5.0)
1.46 (37.0)
Miniflex Technology manufactured by Richco - Patented
Material: Flame Retardant Nylon 6/6 UL94 V0, RMS-19; Color: Black
Standard Pack: 10/bag
Part Number
Incoming Cable Size Diameter
Adapter Color
OFCPA-1-05-19BLK
OFCPA-2-05-19BLK
OFCPA-3-05-19BLK
OFCPA-4-05-19BLK
OFCPA-5-05-19BLK
OFCPA-6-05-19BLK
OFCPA-7-05-19BLK
OFCPA-T-05-19BLK
OFCPA-T-635-19BLK
773-539-4060 Samples: 1-800-621-1892
.098 - .137 (2.5 - 3.5)
.118 - .157 (3.0 - 4.0)
.161 - .196 (4.1 - 5.0)
.200 - .236 (5.1 - 6.0)
.240 - .275 (6.1 - 7.0)
.280 - .335 (7.1 - 8.5)
.335 - .425 (8.5 - 10.8)
.196 (5.0) OFBLT
.196-.250 (5.0-6.35) OFBLT
Black
Blue
Brown
Green
Red
Black Rubber
Black Rubber
Split Black
Split Blue