P600A THRU P600M GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 6.0A FEATURE P600\R-6 Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBO L P600A P600B P600D P600G P600J P600K P600M 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 units * Maximum Recurrent Peak Reverse Voltage Vrrm * Maximum RMS Voltage Vrms * Maximum DC blocking Voltage Vdc Maximum Average Forward Rectified Current 3/8”lead length at Ta =63°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C If(av) 6.0 A Ifsm 400.0 A Vf 1.1 V Ir(av) 50.0 µA 10.0 100.0 150.0 10.0 -50 to +175 µA µA Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Typical Thermal Resistance Ta =25°C Ta =100°C Ir (Note 1) Cj (Note 2) Storage and Operation Junction Temperature R(ja) Tstg V V V pF °C/W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted1 1 Rev.4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES P600A THRU P600M 2 2 Rev.4 www.gulfsemi.com