RL101 THRU RL107 GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.0A FEATURE A - 405 Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL RL 101 RL 102 RL 103 RL 104 RL 105 RL 106 RL 107 units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 V Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Vrms Vdc 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 V V Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operation Junction Temperature Ir If(av) 1.0 A Ifsm 30.0 A Vf 1.1 V Ir(av) 30.0 µA 5.0 50.0 15.0 50.0 -50 to +175 µA µA Cj R(ja) Tstg pF °C/W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RL101 THRU RL107 1 Rev.A5 www.gulfsemi.com