TOKEN TCPWC EMI Filters SMD Choke SMD EMI Filters Common Mode Choke Preview Token EMI filters SMD common mode choke TCPWC series are primarily designed for choking power lines and conform to the RoHS compliant and Lead-free. SMD choke EMI filters feature with ultra-compact size, wide inductance selection, and low-resistance coils. SMD TCPWC can be customed designs and tighter tolerances available on request. Token’s TCPWC taking advantage of the latest winding technology consists ferrite core and a pair lines enabling the most effective in noise suppression designs. Feature high common-mode impedance at noise band and low differential-mode impedance at signal band. Low differential-mode impedance with high coupling factor, there is almost no distortion on high speed signal. Application of SMD choke EMI filters specific designs also available including different inductance values and Q specifications adjusted to frequency requirements. Token will also produce devices outside these specifications to meet customer requirements, with comprehensive application engineering and design support available for customers worldwide. Applications : - USB Line for Personal Computers and Peripheral. - IEEE 1394 Line for Personal Computers ,DVC ,STB. - LCD Panels. Low-Voltage Differential Signal (LVDS). - EMI Radiation Noise Suppression for Any Electronic Device. Version 2010 http://www.token.com.tw/ rfq token.com.tw 01 of 06 TOKEN TCPWC EMI Filters SMD Choke Configurations & Dimensions TCPWCH Enamel-insulated wire B Ferrite Terminal A K H C K E I F J E I G TYPE A B C E F G H I J K TCPWCH05 2.0±0.2 1.2±0.2 1.2±0.2 0.45 1.2 0.4 0.8 0.4 0.4 0.90 TCPWCH06 3.2±0.2 1.6±0.2 1.8±0.2 0.60 2.0 0.6 1.6 0.6 0.4 1.05 Electrical Characteristics Part Number Impedance (Ω) 100MHz DCR (Ω)(max) TCPWCH05MT670 TCPWCH05MT900 TCPWCH05MT121 TCPWCH05MT181 TCPWCH05MT201 TCPWCH05MT261 TCPWCH05MT371 67 90 120 180 200 260 370 0.25 0.35 0.30 0.35 0.35 0.40 0.40 400 330 370 330 330 300 280 50 50 50 50 50 50 50 125 125 125 125 125 125 125 Insulation Resistance (MΩ)(min) 10 10 10 10 10 10 10 TCPWCH06MT900 TCPWCH06MT161 TCPWCH06MT261 TCPWCH06MT601 TCPWCH06MT102 TCPWCH06MT222 90 160 260 600 1000 2200 0.30 0.40 0.50 0.80 1.00 1.20 370 340 310 260 230 200 50 50 50 50 50 50 125 125 125 125 125 125 10 10 10 10 10 10 Rated Current Rated Voltage Withstanding (mA)(max) (V)(DC) Voltage (V)(DC) Note: Operating Temp.: -40°C+85°C. 02 of 06 http://www.token.com.tw/ rfq token.com.tw Version 2010 TOKEN TCPWC EMI Filters SMD Choke Packaging Quantity & Reel Specifications 1.2±0.2 Label D:21.8±0.8 +0 180 -3 60+1 -0 D:13.0±0.3 2.0±0.5 9.5±0.50 Reel Specifications 11.4±1.0 Type TCPWCH05 TCPWCH06 Emboss Plastic Tape (PCS) 2000 2000 Emboss Plastic Tape Specifications Top Tape Φ D0 E A F B T P1 Resistor Emboss Tape Codes TCPWCH05 TCPWCH06 Version 2010 A ±0.10 1.40 1.90 B ±0.05 2.55 3.50 W ±0.20 8.0 8.0 E ±0.10 1.75 1.75 P2 F ±0.10 3.5 3.5 http://www.token.com.tw/ P0 P0 ±0.10 4.00 4.00 W Φ D1 1.5min direction of unreeling P1 ±0.10 4.00 4.00 rfq token.com.tw P2 ±0.10 2.00 2.00 ΦD0 +0.10 1.50 1.50 t ±0.10 1.35 2.10 03 of 06 TOKEN TCPWC EMI Filters SMD Choke Leader / Tape Trailer End Leader Empty Compartments with Cover Tape (80mm min) Trailer(80mm min) Cover Tape Only 450mm min Peel-off Force 160~180° Top cover tape Base tape The force for tearing off cover tape is 0.05 ~ 0.69(N) in the arrow direction at the following conditions: Temperature: 5 ~ 35°C. Humidity: 45 ~ 85%. Atmospheric pressure: 860 ~ 1060 hpa. (TCB4F - 617DB) Electrical Characteristics C Port1 Port2 04 of 06 http://www.token.com.tw/ 50Ω 50Ω rfq token.com.tw Version 2010 TOKEN TCPWC EMI Filters SMD Choke Environmental Characteristics Test Items Specifications Electrical Performance Test Impedance Refer to standard DC Resistance (RDC) electrical characteristic spec. Withstand Voltage (VDC) Rated Voltage Component should not be (VDC) damaged Insulation Resistance (I.R.) Test Conditions / Test Methods LCR Meter HP 4291B Micro-Ohm meter (GOM-801G) Test Voltage: 2.5 Times Rated Voltage; Testing Time: 60 sec. Charge Current: 0.5mA Test Voltage: Rated Voltage; Testing Time: 1 to 5 sec; Charge Current: 1mA Charge Current: 1 minute 10M ohm min Mechanical Performance Test Base: 0805 ≥ 2 Lbs Component Cover: 0805 ≥ 1 Lbs Adhesion Base: 1206 ≥ 4 Lbs (push Test) Cover: 1206 ≥ 2 Lbs Component should not be Drop Test damaged The terminal should at least be Solderability Test 90% covered with solder Vibration Test Component should not be (Low Frequency) damaged The component should be soldered (232°C±5°C for 10 sec.) totinned copper substrate. Applied force gauge to the side of component It must withstand force of 2 or 4 pounds without failure of the component. Dropping chip by each side and corner; Drop 10 times in total Drop height:100cm; Drop weight:125g The component shall be dipped in a melted solder bath at 235°C±5°C for 5 seconds. 1. Amplitude: 1.5 m/m; 2. Frequency: 10-55-10 Hz(1min); 3. Direction: X, Y, Z; 4. Duration: 2 Hrs/X, Y, Z. Climatic Test Low Temperature Storage Test 1. Temp: -40°C±C2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. Thermal Shock Test High Temperature Storage Test Humidity Test High Temperature Load Life Test Low Temperature Load Life Test Impedance change: Within±20% Without distinct damage in ppearance. There should be no evidence of short or open circuit ROOM TEMP 15MINS -25±2°C 30MINS ROOM TEMP 15MINS -85±2°C 30MINS Total: 5 Cycles 1. Temp: 85°C±2°C; 2. Time: 1000±48 Hours; 3. Component should be tested after 1 hour at room temperature. 1. Temp: 40°C±2°C; 2. R.H.: 90%~95%; 3. Time: 48±2 Hours 1. Temp: 85°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current 1. Temp: -40°C±2°C; 2. Time: 96±12 Hours; 3. Load: Allowed DC Current Note: Storage Temperature: 25±3°C; Humidity:<80%RH Version 2010 http://www.token.com.tw/ rfq token.com.tw 05 of 06 TOKEN TCPWC EMI Filters SMD Choke How to Order TCPWC H 05 M TR 900 Part Number: TCPWCH05, TCPWCH06 Shielding Type Code H Shielding Type Shielding Code TR p Packaging Taping Reel Bulk Impedance Dimensions (L×W) (mm) Code 05 06 Packaging Dimensions(L×W) 2.10×1.20 3.20×1.50 EIA EIA0805 1206 Impedance Tolerance: M (±20%) Code 900 121 102 222 Impedance 90Ω 120Ω 1000Ω 2200Ω Back to 1st Page - EMI Filters SMD Common Mode Choke (TCPWC) 06 of 06 http://www.token.com.tw/ rfq token.com.tw Version 2010