16DL2CZ47A,16FL2CZ47A TOSHIBA HIGH EFFICIENCY DIODE STACK (HED) SILICON EPITAXIAL TYPE 16DL2CZ47A,16FL2CZ47A Unit: mm SWITCHING MODE POWER SUPPLY APPLICATION CONVERTER & CHOPPER APPLICATION l Repetitive Peak Reverse Voltage : VRRM = 200, 300V l Average Output Rectified Current : IO = 16A l Ultra Fast Reverse−Recovery Time : trr = 35ns (Max) l Low Switching Losses and Output Noise. MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC Repetitive Peak Reverse Voltage SYMBOL 16DL2CZ47A 16FL2CZ47A Average Output Rectified Current (Full Sine Waveform) Peak One Cycle Surge Forward Current (Non−Repetitive) Junction Temperature Storage Temperature Range Screw Torque RATING 200 VRRM IFSM V 100 IO UNIT 16 A 80 (50Hz) 88 (60Hz) A Tj −40~150 °C Tstg −40~150 °C ― 0.6 N·m JEDEC JEITA TOSHIBA ― ― 12−10C1A Weight: 2.0g ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX 16DL2CZ47A Peak Forward Voltage (Note 1) 16FL2CZ47A VFM IFM = 8A Repetitive Peak ReverseCurrent (Note 1) IRRM UNIT ― ― 0.98 ― ― 1.3 VRRM = Rated ― ― 50 µA V Reverse Recovery Time (Note 1) trr IF = 2.0A, di / dt = −50A / µs ― ― 35 ns Forward Recovery Time (Note 1) tfr IF = 1.0A ― ― 100 ns DC Total, Junction to Case ― ― 3.3 °C / W Thermal Resistance Rth (j−c) Note 1: A value of one cell. POLARITY MARKING *1 MARK *2 16DL2CZ 16FL2CZ TYPE 16DL2CZ47A 16FL2CZ47A A *3 1 2001-07-13 16DL2CZ47A,16FL2CZ47A 2 2001-07-13 16DL2CZ47A,16FL2CZ47A 3 2001-07-13 16DL2CZ47A,16FL2CZ47A RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 4 2001-07-13