TOSHIBA S5566B

S5566B,S5566G,S5566J,S5566N
TOSHIBA RECTIFIER SILICON DIFFUSED TYPE
S5566B,S5566G,S5566J,S5566N
Unit: mm
GENERAL PURPOSE RECTIFIER APPLICATIONS
l Average Forward Current
: IF (AV) = 1A
l Repetitive Peak Reverse Voltage : VRRM = 100, 400, 600, 1000V
MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
S5566B
Repetitive Peak
Reverse Voltage
S5566G
S5566J
Peak One Cycle
Surge Forward
Current
(Non Repetitive)
VRRM
V
600
1.0
A
45 (50Hz)
S5566B
S5566G
IFSM
S5566J
S5566N
Storage Temperature Range
400
1000
IF (AV)
Junction Temperature
UNIT
100
S5566N
Average Forward Current
RATING
49 (60Hz)
30 (50Hz)
A
33 (60Hz)
Tj
−40~150
°C
Tstg
−40~150
°C
JEDEC
JEITA
TOSHIBA
―
―
3−3E1A
Weight: 0.225g
ELECTRICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
MIN
TYP.
MAX
UNIT
Peak Forward Voltage
VFM
IFM = 1.0A
―
―
1.2
V
Repetitive Peak Reverse Current
IRRM
VRRM = Rated
―
―
10
µA
MARKING
1
2001-07-10
S5566B,S5566G,S5566J,S5566N
2
2001-07-10
S5566B,S5566G,S5566J,S5566N
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
3
2001-07-10