U1GU44 TOSHIBA SUPER FAST RECOVERY RECTIFIER SILICON DIFFUSED TYPE U1GU44 Unit: mm SWITCHING MODE POWER SUPPLY APPLICATIONS l Repetitive Peak Reverse Voltage : VRRM = 400 V l Average Forward Current : IF (AV) = 1.0 A : trr = 100 ns (Max) l Very Fast Reverse−Recovery Time l Surface Mounting Plastic Mold Package MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Repetitive Peak Reverse Voltage VRRM 400 V Average Forward Current IF (AV) 1.0 A Peak One Cycle Surge Forward Current (Non−Repetitive) IFSM Junction Temparature Storage Temparature Range 15 (50 Hz) 17 (60 Hz) A Tj −40~150 °C Tstg −40~150 °C JEDEC JEITA TOSHIBA Weight: 0.06g ― ― 3−4D1A ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT Peak Forward Voltage VFM IFM = 1.0 A ― ― 1.5 V Repetitive Peak Reverse Current IRRM VRRM = 400 V ― ― 50 µA Reverse Recovery Time trr IF = 1 A, di / dt = −30 A / µs ― ― 100 ns Forward Recovery Time tfr IF = 1.0 A ― ― 250 ns STANDARD SOLDERING PAD MARKING 1 2001-07-11 U1GU44 2 2001-07-11 U1GU44 RESTRICTIONS ON PRODUCT USE 000707EAA · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 3 2001-07-11