UTC BD136/138/140 PNP EPITAXIAL SILICON TRANSISTOR PNP SILICON TRANSISTOR DESCRIPTION The UTC BD136/BD138/BD140 are silicon epitaxial planer PNP transistor ,designed for use as audio amplifiers and drivers utilizing complementary or quasi complementary circuits. The complementary NPN types are the BD135/BD137/ BD139. 1 TO-126 1:EMITTER 2:COLLECTOR 3:BASE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATING UNIT Collector-Base Voltage BD136 BD138 BD140 VCBO -45 -60 -80 V Collector-Emitter Voltage BD136 BD138 BD140 Emitter-Base Voltage Collector Current Collector Peak Current Base Current Total Dissipation Tstg Tj -45 -60 -80 -5 -1.5 -3 -0.5 12.5 1.25 -65 ~ 150 150 V V A A W W °C °C SYMBOL MAX UNIT θjc θjA 10 100 °C/W °C/W VCEO VEBO Ic IcM IB (Tc≦25°C) (Ta≦25°C) Storage Temperature Operating Junction Temperature Ptot V THERMAL CHARACTERISTICS PARAMETER Thermal Resistance, Junction-case Thermal Resistance, Junction-ambient UTC UNISONIC TECHNOLOGIES CO. LTD 1 QW-R204-013,B UTC BD136/138/140 PNP EPITAXIAL SILICON TRANSISTOR ELECTRICAL CHARACTERISTICS(Tc=25°C,unless otherwise specified) PARAMETER SYMBOL Collector-Emitter Sustaining Voltage BD136 BD138 BD140 Collector Cut-off Current TEST CONDITIONS MIN TYP MAX UNIT VCEO(sus)* IC =-30 mA, IB=0 -45 -60 -80 ICBO VCB =-30 V, IE=0 VCB =-30 V, IE=0, Tc = 125°C Emitter Cut- off Current DC Current Gain IEBO VEB = -5 V, IC=0 hFE1 VCE=-2V, IC =-5 mA, hFE2 VCE=-2V, IC =-0.5A , VCE=-2V, IC =-150 mA, hFE3 Collector-Emitter Saturation Voltage VCE(sat)* IC =-0.5 A, IB = -0.05 A Base-Emitter Voltage VBE* IC =-0.5 A, VCE =-2 V * Pulsed: Pulse duration ≦ 300 µs, duty cycle 1.5 % 25 25 40 V -0.1 -10 µA -10 µA 250 -0.5 -1 V V CLASSIFICATION OF hFE3 RANK RANGE -6 40~100 -10 63~160 -16 100~250 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R204-013,B