UTC-IC U74HC595A

UNISONIC TECHNOLOGIES CO., LTD
U74HC595A
CMOS IC
8-BIT SERIAL-IN SHIFT
REGISTER WITH LATCHED
3-STATE PARALLEL OUTPUTS,
PROVIDING SERIAL OUTPUT
„
DESCRIPTION
The UTC 74HC595A contains an 8-bit register with
asynchronous reset input and an 8-bit latch with output. The Serial
Data Input (A) will shift into the internal shift register during every
LOW-to-HIGH transition on the Shift Clock. The latch will latch the
8-bit data from the shift register during the LOW-to-HIGH transition
on the Latch Clock. The shift register also provides a serial output.
„
FEATURES
* Operation Voltage Range:2~6V
* High Noise Immunity
* Output Compatibility with CMOS and TTL
* Specified from -40~+125°C
* Halogen Free
„
ORDERING INFORMATION
Ordering Number
U74HC595AG-S16-R
Package
SOP-16
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
Packing
Tape Reel
1 of 6
QW-R502-354.A
U74HC595A
„
„
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE
INPUT
Operation
Reset
Serial Shift
input A clock
OUTPUT
Latch Output
clock enable
SR
LR
SQH
Reset shift register
L
X
X
L,H, È
L
L
NC
L
DÆ SRA
Shift data into shift
H
D
L,H, È
L
NC
SRGÆSRH
Ç
register
SRNÆSRN+1
Shift register remains
H
X
L,H, È L,H, È
L
NC
NC
NC
unchanged
Transfer shift register
contents to latch
H
X
L,H, È
L
NC
SRNÆLRN
NC
Ç
register
Latch register remains
X
X
X
L,H, È
L
*
NC
*
unchanged
Enable parallel outputs
X
X
X
X
L
*
**
*
Force outputs into high
X
X
X
X
H
*
**
*
impedance state
SR: shift register contents LR: latch register contents NC: unchanged
D: data(L,H) logic level Ç: low-to-high
È: high-to-low
*: depends on Reset and Shift Clock inputs
**: depends on Latch Clock inputs
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
QA to QH
NC
NC
NC
SRN
NC
Enabled
Z
2 of 6
QW-R502-354.A
U74HC595A
„
CMOS IC
LOGIC DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-354.A
U74HC595A
„
CMOS IC
ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 2)
PARAMETER
Supply Voltage
Input Voltage
Output Voltage(active mode)
RATINGS
UNIT
-0.5~7.0
V
-0.5~Vcc+0.5
V
-0.5~VCC+0.5
V
Input Clamp Current (VIN <0)
±20
mA
Output Clamp Current (VOUT <0)
±20
mA
Output Current
±35
mA
VCC or GND Current
±75
mA
Power Dissipation
500
mW
PD
Derate above 65°C~125°C
7
mW
Storage Temperature
TSTG
-65 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are
observed.
„
SYMBOL
VCC
VIN
VOUT
IIK
IOK
IOUT
ICC
RECOMMENDED OPERATING COMDITIONS
PARAMETER
SYMBOL
VCC
VIN
VOUT
TOPR
Supply Voltage
Input Voltage
Output Voltage
Operating Temperature
Input Transition Rise or Fall Rate
„
VCC =2V
VCC =4.5V
VCC =6V
MIN
2
0
0
-40
Δt
ΔV
TYP
MAX
6
VCC
VCC
125
1000
500
400
UNIT
V
V
V
°C
ns
ns
ns
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
HIGH-level input voltage
VIH
LOW-lever output voltage
VIL
High-Level Output Voltage,
QA-QH
VOH
Low-Level Output Voltage,
QA-QH
VOL
TEST CONDITIONS
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V, IOH=-20μA
VCC=4.5V, IOH=-20μA
VCC=6V, IOH=-20μA
VCC=3V, IOH=-2.4mA
VCC=4.5V, IOH=-6mA
VCC=6V, IOH=-7.8mA
VCC=2V, IOL=20μA
VCC=4.5V, IOL=20μA
VCC=6V, IOL=20μA
VCC=3V, IOL=2.4mA
VCC=4.5V, IOL=6mA
MIN TYP MAX UNIT
1.5
V
2.1
V
3.15
V
4.2
V
0.5
V
0.9
V
1.35
V
1.8
V
1.9
V
4.4
V
5.9
V
2.48
V
3.98
V
5.48
V
0.1
V
0.1
V
0.1
V
0.26
V
0.26
V
VCC=6V, IOL=7.8mA
High-Level Output Voltage,
SQH
VOH
VCC=2V, IOH=-20μA
VCC=4.5V, IOH=-20μA
VCC=6V, IOH=-20μA
VCC=3V, IOH=-2.4mA
VCC=4.5V, IOH=-4mA
VCC=6V, IOH=-5.2mA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
0.26
1.9
4.4
5.9
2.48
3.98
5.48
V
V
V
V
V
V
V
4 of 6
QW-R502-354.A
U74HC595A
„
CMOS IC
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
SYMBOL
Low-Level Output Voltage,
SQH
VOL
Input Leakage Current
Output OFF -state current
Quiescent Supply Current
Input Capacitance
II(LEAK)
IOZ
IQ
CIN
„
MIN
TYP MAX UNIT
0.1
V
0.1
V
0.1
V
0.26
V
0.26
V
0.26
V
±0.1 μA
±0.5 μA
4
μA
10
pF
MIN
TYP MAX
6
15
30
35
140
100
28
24
135
90
27
23
150
100
30
26
75
27
15
13
145
100
29
25
140
100
28
24
60
23
12
10
MIN
TYP MAX UNIT
300
pF
DYNAMIC CHARACTERISTICS
PARAMETER
Maximum clock pulse frequency
SYMBOL
fmax
Propagation delay from input
(Latch Clock) to output(Qn)
tPHL/tPLH
Propagation delay from input
(Output Enable) to output(Qn)
tPZL/tPZH
Propagation delay from input
(Output Enable) to output(Qn)
tPLZ/tPHZ
Output transition time, SQH
tTLH/ tTHL
Propagation delay from input
(Reset) to output(SQH)
tPHL
Propagation delay from input
(Shift Clock) to output(SQH)
tPLH/tPHL
Output transition time, Qn
tTLH/ tTHL
„
TEST CONDITIONS
VCC=2V, IOL=20μA
VCC=4.5V, IOL=20μA
VCC=6V, IOL=20μA
VCC=3V, IOL=2.4mA
VCC=4.5V, IOL=4mA
VCC=6V, IOL=5.2mA
VCC=6V, VIN=VCC or GND
VCC=6V, VOUT=VCC or GND
VCC=6V, VIN=VCC or GND, IOUT=0
VCC=6V, VIN=VCC or GND
TEST CONDITIONS
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
VCC=2V
VCC=3V
VCC=4.5V
VCC=6V
UNIT
MHz
MHz
MHz
MHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
OPERATING CHARACTERISTICS
PARAMETER
Power Dissipation Capacitance
SYMBOL
Cpd
TEST CONDITIONS
No load
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-354.A
U74HC595A
„
CMOS IC
TEST CIRCUIT AND WAVEFORMS
VCC
K1
From Output
CL
RL
K2
(Note 2)
Note 2: CL includes probe and jig capacitance. CL=50pF, RL=1KΩ
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-354.A