UNISONIC TECHNOLOGIES CO., LTD U74HC595A CMOS IC 8-BIT SERIAL-IN SHIFT REGISTER WITH LATCHED 3-STATE PARALLEL OUTPUTS, PROVIDING SERIAL OUTPUT DESCRIPTION The UTC 74HC595A contains an 8-bit register with asynchronous reset input and an 8-bit latch with output. The Serial Data Input (A) will shift into the internal shift register during every LOW-to-HIGH transition on the Shift Clock. The latch will latch the 8-bit data from the shift register during the LOW-to-HIGH transition on the Latch Clock. The shift register also provides a serial output. FEATURES * Operation Voltage Range:2~6V * High Noise Immunity * Output Compatibility with CMOS and TTL * Specified from -40~+125°C ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74HC595AL-D16-T U74HC595AG-D16-T U74HC595AG-S16-R U74HC595AG-P16-R Package Packing DIP-16 SOP-16 TSSOP-16 Tube Tape Reel Tape Reel MARKING DIP-16 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SOP-16 / TSSOP-16 1 of 7 QW-R502-354.E U74HC595A CMOS IC PIN CONFIGURATION FUNCTION TABLE Operation INPUT Serial Shift Latch Output Reset input A clock clock enable L X X L,H, L Reset shift register Shift data into shift H D L,H, register Shift register remains H X L,H, L,H, unchanged Transfer shift register contents to latch H X L,H, register Latch register remains X X X L,H, unchanged Enable parallel outputs X X X X Force outputs into high X X X X impedance state SR: shift register contents LR: latch register contents D: data(L,H) logic level : low-to-high *: depends on Reset and Shift Clock inputs L OUTPUT SR LR SQH QA to QH L D SRA SRNSRN+1 NC L NC NC SRGSRH NC L NC NC NC NC L NC SRNLRN NC SRN L * NC * NC L * ** * Enabled H * ** * Z NC: unchanged : high-to-low **: depends on Latch Clock inputs LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 7 QW-R502-354.E U74HC595A CMOS IC ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 2) PARAMETER Supply Voltage Input Voltage Output Voltage(active mode) Input Clamp Current (VIN <0) Output Clamp Current (VOUT <0) Output Current VCC or GND Current RATINGS UNIT -0.5~7.0 V -0.5~Vcc+0.5 V -0.5~VCC+0.5 V ±20 mA ±20 mA ±35 mA ±75 mA DIP-16 750 Power Dissipation SOP-16 PD 500 mW TSSOP-16 450 Storage Temperature TSTG -65 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL VCC VIN VOUT IIK IOK IOUT ICC RECOMMENDED OPERATING COMDITIONS PARAMETER SYMBOL VCC VIN VOUT TOPR Supply Voltage Input Voltage Output Voltage Operating Temperature Input Transition Rise or Fall Rate VCC =2V VCC =4.5V VCC =6V t R / tF UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2 0 0 -40 TYP MAX 6 VCC VCC 125 1000 500 400 UNIT V V V °C ns ns ns 3 of 7 QW-R502-354.E U74HC595A CMOS IC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL HIGH-level input voltage VIH LOW-lever output voltage VIL High-Level Output Voltage, QA-QH VOH Low-Level Output Voltage, QA-QH VOL High-Level Output Voltage, SQH VOH Low-Level Output Voltage, SQH VOL Input Leakage Current Output OFF -state current Quiescent Supply Current Input Capacitance II(LEAK) IOZ IQ CIN TEST CONDITIONS VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V, IOH=-20μA VCC=4.5V, IOH=-20μA VCC=6V, IOH=-20μA VCC=3V, IOH=-2.4mA VCC=4.5V, IOH=-6mA VCC=6V, IOH=-7.8mA VCC=2V, IOL=20μA VCC=4.5V, IOL=20μA VCC=6V, IOL=20μA VCC=3V, IOL=2.4mA VCC=4.5V, IOL=6mA VCC=6V, IOL=7.8mA VCC=2V, IOH=-20μA VCC=4.5V, IOH=-20μA VCC=6V, IOH=-20μA VCC=3V, IOH=-2.4mA VCC=4.5V, IOH=-4mA VCC=6V, IOH=-5.2mA VCC=2V, IOL=20μA VCC=4.5V, IOL=20μA VCC=6V, IOL=20μA VCC=3V, IOL=2.4mA VCC=4.5V, IOL=4mA VCC=6V, IOL=5.2mA VCC=6V, VIN=VCC or GND VCC=6V, VOUT=VCC or GND VCC=6V, VIN=VCC or GND, IOUT=0 VCC=6V, VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.5 2.1 3.15 4.2 1.9 4.4 5.9 2.48 3.98 5.48 1.9 4.4 5.9 2.48 3.98 5.48 TYP MAX UNIT V V V V 0.5 V 0.9 V 1.35 V 1.8 V V V V V V V 0.1 V 0.1 V 0.1 V 0.26 V 0.26 V 0.26 V V V V V V V 0.1 V 0.1 V 0.1 V 0.26 V 0.26 V 0.26 V ±0.1 μA ±0.5 μA 4 μA 10 pF 4 of 7 QW-R502-354.E U74HC595A CMOS IC DYNAMIC CHARACTERISTICS PARAMETER Maximum clock pulse frequency SYMBOL fmax Propagation delay from input (Latch Clock) to output(Qn) tPHL/tPLH Propagation delay from input (Output Enable) to output(Qn) tPZL/tPZH Propagation delay from input (Output Enable) to output(Qn) tPLZ/tPHZ Output transition time, SQH tTLH/ tTHL Propagation delay from input (Reset) to output(SQH) tPHL Propagation delay from input (Shift Clock) to output(SQH) tPLH/tPHL Output transition time, Qn tTLH/ tTHL TEST CONDITIONS VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V VCC=2V VCC=3V VCC=4.5V VCC=6V MIN TYP MAX UNIT 6 MHz 15 MHz 30 MHz 35 MHz 140 ns 100 ns 28 ns 24 ns 135 ns 90 ns 27 ns 23 ns 150 ns 100 ns 30 ns 26 ns 75 ns 27 ns 15 ns 13 ns 145 ns 100 ns 29 ns 25 ns 140 ns 100 ns 28 ns 24 ns 60 ns 23 ns 12 ns 10 ns TEST CONDITIONS No load MIN TYP 300 MAX UNIT pF OPERATING CHARACTERISTICS PARAMETER Power Dissipation Capacitance SYMBOL Cpd UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 7 QW-R502-354.E U74HC595A CMOS IC TIMING DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 7 QW-R502-354.E U74HC595A CMOS IC TEST CIRCUIT AND WAVEFORMS VCC K1 From Output CL RL K2 (Note 2) Note 2: CL includes probe and jig capacitance. CL=50pF, RL=1KΩ UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R502-354.E