Jump to PDF Datasheets B-8 Series Dual-In-Line Package (DIP) TCXOs Features l 14/4 Pin TCXO Specifications Output Options TC = LS TTL, 1.0 to 160 MHz AC = CMOS AC, 1.0 to 160 MHz HC = HCMOS, 10 to 160 MHz RB = +4.0 dBm 50 ohm, 2 to 80 MHz EH = ECL 10 KH, 10 to 160 MHz Stability Options A16 = ±1.0 PPM 0°C to +50°C B26 = ±2.0 PPM 0°C to +70°C C36 = ±3.0 PPM -20°C to +70°C D56 = ±5.0 PPM -40°C to +85°C Supply Voltage 5.0 Vdc ±5% (EH = -5.2 Vdc) Voltage Stability <1.0 PPM for ±5% Trim Range >15 PPM Tuning Voltage 0 to +5.0 Vdc Seal <1 X 10-8 cc/second Screening Options C = Standard Commercial B = Class "B" per MIL-O-55310 Typical P/N GO is predetermined HC B8 GO A16 C 24.000 MHz Outline Diagram Pins are 0.018 diameter Dimension in inches Pinouts (TC, AC, HC, RB outputs) 1 Tune, 0 to +5 Volts 7 Ground/Case 8 Output 14 +5.0 Vdc Pinouts (EH outputs) 1 Tune, 0 to -5.2 Volts 7 -5.2 Vdc 8 Output 14 Ground/Case For additional information please contact: USA: EUROPE: ASIA: Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON Email: [email protected] Tel: 49 (0) 3328 4784 17 Fax: 49 (0) 3328 4784 30 Tel: +86 21 28909740 / 41 /42 Fax: +86 21 28909240 / 2890999 [ Vectron Home ] [ About | What's New | Products | App Notes | Contact | Jobs ] [ XO | VCXO | TCXO | OCXO | CDR | SAW | XTAL ] Copyright © 1997-1999 by Vectron International. The most recent change to this page occurred Wednesday, November 3, 1999.