PX-501 Clock Oscillator Features Reflow Process Compatible Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test Equipment Synthesizers Previous Vectron Model Number C1310 Frequency Range 1 MHz – 700 MHz Standard frequencies 10; 20; 24.705; 30.720; 32.768; 50; 68.768; 76.8; 77.76MHz; 100; 125; 150; 155.52; 156.25; 175; 200; 250; 280; 312.5MHz; 340; 400; 622,08 MHz Frequency stabilities1 [Standard] Parameter Min vs. operating temperature range (Referenced to +25°C) -10.0 Parameter Min Initial tolerance Max Units Operating temperature range +10.0 ppm -20 … +70°C Max Units Operating temperature range -5.0 +5.0 ppm vs. supply voltage change -1.0 +1.0 ppm VS ± 5% vs. load change -1.0 +1.0 ppm Load ± 5% /1. Year -3.0 +3.0 ppm / year (followingYears) -1.0 +1.0 ppm vs. aging vs. aging Typ Typ htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 1/7 Frequency stabilities1 [meets SONET Minimum Clock Specification-Option] Parameter Min Typ Max Units Operating temperature range vs. operating temperature range Parameter overall tolerance -20 … +70°C Min Typ Max -20.0 +20.0 Units Conditions ppm ( 15 Years aging, temp, initial, supply, load ) Condition Supply Voltage (Vs) Parameter Min Typ Max Units Supply voltage (Vs) 4.75 5.0 5.25 VDC Current consumption 40 mA @ HCMOS < 155 MHz Current consumption 90 mA @ PECL < 155 MHz 3.465 VDC Current consumption 30 mA @ LVHCMOS< 155 MHz Current consumption 80 mA @ LVPECL< 155 MHz Current consumption 25 mA @ LVDS< 155 MHz Units Condition Supply voltage (Vs) 3.135 3.3 Parameter RF Output Min Typ Signal Max HCMOS Load 15.0 pF Rise and Fall Time Duty cycle 40 Signal 45 Signal Ω Vs-2V 1 ns 20-80% 55 % 1 ns 60 % 3 dBm 10 to 90 % Sinewave Load 50 -3 Jitter @Vs/2 Ω 40 Signal Phase Noise % 100 Rise and Fall time Parameter 60 LVDS Load Output Power @15 pF 10 to 90% 50 Rise and Fall Time Duty cycle ns PECL Load Duty cycle 5 0 Ω Additional Parameters Min Typ Max Units Condition -85 dBc/Hz 10 Hz @49,408 MHz -120 dBc/Hz 100 Hz HCMOS -145 dBc/Hz 1 kHz 3,3V -155 dBc/Hz 10 kHz -160 dBc/Hz 100 0,2 ps RMS kHz @ 12 kHz to 20 MHz htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 2/7 Parameter Additional Parameters Min Phase Noise Jitter Parameter Min Phase Noise Jitter Typ Uniits Condition -80 dBc/Hz 10 Hz @125 MHz -115 dBc/Hz 100 Hz PECL -135 dBc/Hz 1 kHz 3,3V -141 dBc/Hz 10 kHz -141 dBc/Hz 100 0,6 ps RMS @ 12 kHz to 20 MHz Units Condition Typ Max kHz -62 dBc/Hz 10 Hz @400 MHz -93 dBc/Hz 100 Hz PECL -124 dBc/Hz 1 kHz 3,3V -142 dBc/Hz 10 kHz -143 dBc/Hz 100 kHz 0,2 ps RMS Weight 2 Processing & Packing @ 12 kHz to 20 MHz g handling & processing note Parameter Max Absolute Maximum Ratings Min Supply voltage (Vs) Typ Max. Units 7 V Operable temperature range -30 +80 °C Storage temperature range -40 +90 °C Condition htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 3/7 Enclosure Pin Length “L” 5,9 NA Height “H” Pin Length “L” 5,9 NA Dimensions: mm Dimensions: mm Pin Connections Pin Connections 1 NC / Enable (optional) 1 N/C 2 Ground (Case) 2 N/C / Enable (optional) 3 RF Output 3 Ground (Case) 4 Supply Voltage Input (Vs) 4 RF Output Options5 Height “H” Type G218 “B” for HCMOS; PECL; LVPECL and LVDS Version Options5 Type G223 “A” for HCMOS and LVHCMOS Version 5 Complementary RF Output / (N/C: HCMOS only) 6 Supply Voltage Input (Vs) Outline Drawing: G223B Outline Drawing: G218B Enable true table Pin 2 Pin 4 Pin 5 Pin 4 HCMOS LVPECL / LVDS Pin 5 High Data N/C No Data No Data Open Data N/C Data compl. Data Low High Tristate N/C Data compl. Data Marking PX-501 Frequency ● AYYWW htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 4/7 Typical Phase Noise and Jitter 49,408 MHz; HCMOS output 125 MHz; PECL output Frequency range [Hz] Jitter [ps rms] Frequency range [Hz] Jitter [ps rms] 12kHz to 20MHz 0.188ps 12kHz to 20MHz 0.608ps (400 MHz; PECL output) Typical frequency stability vs temperature Frequency range [Hz] Jitter [ps rms] 12kHz to 20MHz 0.140ps Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 5/7 Standard Shipping Methode Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P G218B / G223B 24 83,3 850 12 Recommanded Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. 150°C 200°C 60-180 seconds Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max) (ts) TSmax to TL-Ramp-up Rate 3°C/second max Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260°C Ramp-down Rate 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 6/7 How to order this product: Use this worksheet to forward the following information to your factory representative: Model Height - Supply Voltage Code RF Output Code Temperature Range - PX-501 0 - E A J - Height: 0: A 5,9 mm 1: B 5,9 Supply Voltage Code: RF Output Code: E: D: A: 3,3 V 5 V C: D: E: Stability X - Frequency 105 X - 10MHz Temperature Range/Stability Code: J-105: -20...+70°C ±10ppm J-205: -20...+70°C ±20ppm over all HCMOS PECL LVDS Sinewave htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 PX-501 page: 7/7