NH Series (SCSI-2/-3) IDC Type Plastic Plug for Internal Use (1.27mm Pitch) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: Part Number (Details) NHP 068T - 000 - BS 500MΩ min. 250V AC rms for 1 minute 35mΩ max. 1A –55°C to +105°C Series (plug) No. of Leads Terminal Type: 0 = IDC for Flat Cables Materials and Finish Housing: PBT with glass fiber Contacts: Phosphor Bronze Plating: Contact Plating: B = Mating Face Cont.- Au (15µ“)over Ni S = IDC Terminals - Solder over Ni Mating Face - Au over Nickel IDC Terminals - Solder over Nickel Applicable Cables 0.635mm pitch flat cable, AWG 30 (7/0.1) stranded wire. (e.g. FLEX-*2*, see Section E) Features ¼ Half pitch interface connectors with SCSI-II pin type contacts ¼ Low cost due to plastic insulator housing Outline Plug Dimensions Strain Relief Cover Row-A #1 Terminal Row-B #1 Terminal Part Number No. of Leads A B C D E F G NHP050T-000-BS NHP068T-000-BS 50 68 30.48 41.91 40.07 51.50 36.22 63.88 37.87 49.30 34.85 46.13 35.67 47.10 37.77 49.20 Trading Division SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Sockets and Connectors NHA Series Over-molded Cover - SCSI-3 (180° Cable Exit) Screw Lock Type Cover Part Number (Details) NHA 068 S - PC 01 - * Series No. No. of Leads Mating Lock Type: S = Screw Lock Type of Cover = Over-molded Metal Cover Materials and Finish Hood: ABS, UL94V-0 rated Metal Parts: ZDC, Nickel Plated Features ➭ Applicable cable outer diameter: 9.5 to 10.5mm ➭ Shielded and Over-molded cover for EMI / ESD protection 01 = For I/O Cables Cover Colour: 0 = Beige 1 = Grey 2 = Black Outline Dimensions SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Sockets and Connectors