Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com N932 NHG RELAYS Operation condition N932 31 23 Features Switching capacity up to 15A. Suitable for automation system and auxiliary automobile etc. Insulation Resistance1) Dielectric Strength 1) Between contacts Between contact and coil Shock resistance Vibration resistance Terminals strength Solderability 100M 50Hz 500V 50Hz 500V 100m/s2 11ms 10~55Hz double amplitude 1.5mm 8N 235 2 5 0.5s Item 6 of IEC255-5 Item 6 of IEC255-5 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua2 IEC68-2-20 Test Ta method 1 Ambient Temperature Relative Humidity Mass -40~125 85% (at 40 ) 31g IEC68-2-3 Test Ca min (at 500VDC) Item 7 of IEC255-5 Note: 1). When testing, coil terminals should be connected, if coil transient suppression is installed in relay . Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Ordering Information DC12V D 3 4 mm /inch Dimensions 5 1 Part number N932 2 Contact arrangement C:1C 3 Contact rating 15:15A/14VDC 4 Coil rated voltage(V) DC: 12 5 Coil transient suppression: D: with diode NIL: standard 31max. 0.630max. 31 1.220 9 0.354 1C SPDT(B-M) Au AgNi 15A/14VDC 210W 15VDC 50m 105 107 87a Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation Electrical life Mechanical Max. Switching Current:15A Item 3.12 of IEC255-7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 20 0.787 60 Dimensions Mounting (Bottom view) Coil Parameter Dash numbers Coil voltage VDC Rated Max Pickup voltage Coil resistance VDC(max) 10% (67%of rated voltage ) Release voltage VDC(min) (10% of rated voltage) Coil power consumption W 20 0.787 30 86 Contact Data 5- 3.4 0.134 85 2 23 Max. 0.905max. 1 87 N932 C 15 Operate Time ms Release Time ms 87a 30 87 012-1800 12 15.6 80 8 1.2 1.8 10 8 85 86 (+) CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. Wiring diagram (Bottom view) 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. Ningbo Huaguan Relay Corporation LTD.