IF Filters for Basestations The following products presented in this data sheet are being withdrawn. Ordering Code B39401B5002U310 Substitute Product Date of Withdrawal 2006-12-01 Deadline Last Orders 2007-02-28 Last Shipments 2007-05-31 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. SAW Components Data Sheet B5002 SAW Components B5002 Low-Loss Filter 398,0 MHz Data Sheet Ceramic package QCC8C Features ● ● ● ● Low-loss IF filter for W-CDMA base station, Tx 20 MHz usable bandwidth Very low passband ripple Ceramic SMD package Terminals ● Gold plated Dim. in mm, approx. weight 0,1 g Pin configuration 2 3 6 7 1, 5 4, 8 Input Input ground Output Output ground To be grounded Case ground Type Ordering code B5002 B39401-B5002-U310 Marking and Package according to C61157-A7-A56 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps –40 / +85 –40 / +85 5 10 2 ˚C ˚C V dBm Jun 25, 2004 Packing according to F61074-V8169-Z000 SAW Components B5002 Low-Loss Filter 398,0 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = -40 .. +85 ˚C ZS = 50 Ω unbalanced and matching network ZL = 50 Ω unbalanced and matching network min. typ. max. — 398,0 — MHz — 3,3 4,0 dB — 3,8 5,0 dB 20 26 — MHz — — 0,2 0,4 0,5 1,0 dB dB — — 0,1 1,0 0,5 3,0 ˚ ˚ 15 38 15 35 15 60 60 60 45 45 — — — — — dB dB dB dB dB Input return loss (in passband) fN - 7,50 MHz ... fN + 7,50 MHz 6 8 — dB Output return loss (in passband) fN - 7,50 MHz ... fN + 7,50 MHz 8 10 — dB — – 70 — ppm/K Nominal frequency fN Minimum insertion attenuation fN - 7,50 MHz ... fN + 7,50 MHz αmin Maximum insertion attenuation (in passband) fN - 7,50 MHz ... fN + 7,50 MHz αmax Pass bandwidth αrel ≤ 1,0 dB B1,0dB Amplitude ripple (p-p) fN - 1,92 MHz ... fN + 1,92 MHz fN - 7,50 MHz ... fN + 7,50 MHz ∆α Deviation from linear phase (rms) fN - 1,92 MHz ... fN + 1,92 MHz fN - 7,50 MHz ... fN + 7,50 MHz ∆ϕ Relative attenuation (relative to αmin) 100 MHz ... 335 MHz 335 MHz ... 338 MHz 338 MHz ... 365 MHz 365 MHz ... 368 MHz 448 MHz ... 3 GHz αrel TCf Temperature coefficient of frequency 3 Jun 25, 2004 SAW Components B5002 Low-Loss Filter 398,0 MHz Data Sheet Matching network to 50 Ω Cp1 = 3,3 pF Ls3 = 12 nH Ls2 = 10 nH Cp4 = 2,2 pF Element values depend upon board layout 4 Jun 25, 2004 SAW Components B5002 Low-Loss Filter 398,0 MHz Data Sheet Transfer function Transfer function (pass band) 5 Jun 25, 2004 SAW Components B5002 Low-Loss Filter 398,0 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 6 Jun 25, 2004