SAW filters for infrastructure systems Series/Type: B5014 The following products presented in this data sheet are being withdrawn. Ordering Code B39121B5014Z710 Substitute Product Date of Withdrawal 2012-01-13 Deadline Last Orders 2012-12-31 Last Shipments 2013-03-30 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales. SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Ceramic package QCC10B Features ■ ■ ■ ■ Low-loss IF filter for GSM base station Temperature stable Ceramic SMD package Unbalanced or balanced operation Terminals ■ Gold plated Dimensions in mm, approx. weight 0,8 g Pin configuration 9 10 4 5 2, 7 1, 3, 6, 8 Input or balanced input Input ground or balanced input Output or balanced output Output ground or balanced output Ground Case ground Type Ordering code B5014 B39121-B5014-Z710 Marking and Package according to C61157-A7-A49 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps –40 / +85 –40 / +85 0 10 2 ˚C ˚C V dBm Sep 29, 2004 Packing according to F61074-V8172-Z000 SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T = -10 to +85 ˚C ZS = 50 Ω and external matching network ZL = 50 Ω and external matching network min. typ. max. Nominal frequency fN — 119,6 — Minimum insertion attenuation αmin — 6,5 B1,0dB — 8,0 MHz dB 1dB bandwidth αrel ≤ 1,0 dB 400 — kHz Amplitude ripple (p-p) fN ± 75 kHz ∆α — Group delay ripple (p-p) fN ± 75 kHz ∆τ — 100 400 ns 9 20 26 30 15 35 35 45 — — — — dB dB dB dB 55 55 65 65 — — dB dB 9 15 — dB Relative attenuation (relative to αmin) fN ± 400 kHz ... fN ± 600 kHz fN ± 600 kHz ... fN ± 800 kHz fN ± 800 kHz ... fN ± 3 MHz fN ± 3 MHz ... fN ± 20 MHz 1 MHz fN + 20 MHz ... ... Return loss (at fN ) 1) Temperature dependance of fc: 1,0 dB αrel fN − 20 MHz 500 MHz Temperature coefficient of frequency Turnover temperature 0,3 1) TCf — –0,036 — ppm/K2 T0 — 40 — ˚C fc(TA) = fc(T0)(1 + TCf(TA – T0)2) 3 Sep 29, 2004 SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Matching network to 50 Ω (Element values depend on PCB layout) Cp1 = 39 pF Ls3 = 150 nH || 1.2 pF Ls2 = 180 nH || 1.0 pF Cp4 = 47 pF 4 Sep 29, 2004 SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Normalized frequency response Normalized frequency response (pass band) 5 Sep 29, 2004 SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Normalized frequency response (wideband) 6 Sep 29, 2004 SAW Components B5014 Low-Loss Filter 119,6 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC PD P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Sep 29, 2004