For more information, please visit the product page. date 03/13/2015 page 1 of 6 SERIES: PLDA60 │ DESCRIPTION: LED DRIVER FEATURES • • • • • • • • • over voltage, continuous short circuit, and over temperature protection • UL 8750, IEC/EN61347-2-13 approval • EN61000-3-2 Class C (harmonic current) approval • efficiency up to 86% • suitable for LED lighting and signage applications up to 60 W continuous power universal input range (90~305 Vac) single/dual output dimming options: PWM, 1~10 Vdc, resistive, DALI power factor correction ≥ 0.9 constant current low profile for easy installation IP67 rated MODEL output voltage range1 output current output power ripple and noise2 efficiency min (Vdc) max (Vdc) (mA) max (W) max (mVp-p) typ (%) PLDA60-1250-277 9 48 1250 60 480 86 PLDA60-1666-277 9 36 1666 60 360 85 PLDA60-2500-277 9 24 2500 60 240 85 PLDA60-D625-277 9 48 Io1 Io2 625 625 30 30 480 87 PLDA60-D833-277 9 36 Io1 Io2 833 833 30 30 360 85 PLDA60-D1250-277 9 24 Io1 Io2 1250 1250 30 30 240 85 Notes: 1. constant current region 2. ripple and noise are measured at 20MHz bandwidth with a 0.1uF ceramic capacitor and 10uF aluminum capacitor. PART NUMBER KEY PLDA60 - XXXXX - 277XXA IP Rating A = IP67 Base Number Dimming PE = PWM, 1~10 Vdc, resistive D = DALI “blank” = no dimming Output “blank” = single D = dual Output Current Input Voltage 277 = (90~305 Vac) cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 2 of 6 INPUT parameter conditions/description min voltage frequency current at 115 Vac, full load at 230 Vac, full load inrush current at 240 Vac, cold start, 25°C, after 100 μs leakage current at 277 Vac power factor correction at 115 Vac/230 Vac, 75~100% load max units 90 127 typ 305 420 Vac Vdc 50 60 Hz 0.69 0.32 A A 5 A 0.75 mA 1 W max units 0.9 no load power consumption OUTPUT parameter conditions/description min typ current line regulation measured from high line to low line at full load ±5 % current load regulation measured from min. to max. of constant current region ±5 % constant current accuracy at nominal input and full load ±5 % switching frequency start-up time 60 at 90 Vac kHz 0.5 temperature coefficient ±0.05 s %/°C PROTECTIONS parameter conditions/description over voltage protection TVS clamp short circuit protection hiccup mode, auto recovery min over temperature protection typ max 105 units °C SAFETY & COMPLIANCE parameter conditions/description min typ isolation voltage input to output, for 1 minute isolation resistance input to output safety approvals UL8750, IEC/EN61347-1, IEC/EN61347-2-13, PSE DALI IEC62386-102, IEC62386-207 EMI/EMC FCC Part 15 Class B/EN55015, EN61547, EN61000-4-(2,3,4,5,6,8,11), EN61000-3-2 Harmonic Class C, EN61000-3-3 MTBF as per MIL-HDBK-217F, at 25°C RoHS 2011/65/EU max units 3,750 Vac 100 MΩ 200,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature see derating curves storage temperature operating altitude cui.com typ max units -40 70 °C -40 85 °C 3,000 m For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 3 of 6 MECHANICAL parameter conditions/description dimensions 10.315 x 1.575 x 0.992 (262 x 40 x 25.2 mm) min typ max units inches weight 530 g MECHANICAL DRAWING SINGLE OUTPUT MODELS units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified 11.102[282.00] 10.709[272.00] INPUT WIRE CONNECTIONS Color Function Black ACL White ACN 10.315[262.00] 11.811[300.00]±0.787[20.00] 0.787[20.00] 0.394[10.00] 0.787[20.00] Black ACL White ACN INPUT 0.394[10.00] UL 2464 18AWG 11.811[300.00]±0.787[20.00] +Vo Black -Vo Blue1 +Dimming (D+/DA+) White1 -Dimming (D-/DA-) 1.575[40.00] 1.024[26.00] Note: 1. wires present on dimming models only. PE models are marked with “D”, DALI models are marked with “DA”. 0.276[7.00] Function Red 0.992[25.20] OUTPUT WIRE CONNECTIONS Color UL 2464 16AWG+22AWG OUTPUT 22AWG Blue D+ (Optional) 22AWG White D16AWG Red +Vo 16AWG Black -Vo DUAL OUTPUT MODELS units: inches[mm] tolerance: ±0.02[±0.5] unless otherwise specified 11.102[282.00] INPUT WIRE CONNECTIONS Color 10.709[272.00] 10.315[262.00] Black ACL White ACN 11.811[300.00]±0.787[20.00] 0.787[20.00] Function 0.394[10.00] 0.787[20.00] Black ACL White ACN INPUT 0.394[10.00] UL 2464 16AWG+22AWG OUTPUT Black-Vo UL 2464 18AWG UL 2464 16AWG 11.811[300.00]±0.787[20.00] -Vo1 Blue +Dimming (D+/DA+) White1 -Dimming (D-/DA-) Red +Vo2 Black -Vo2 1 Note: 1. wires present on dimming models only. PE models are marked with “D”, DALI models are marked with “DA”. 0.992[25.20] +Vo1 1.024[26.00] Red Black 11.811[300.00]±0.787[20.00] 0.276[7.00] Function Red +Vo 0.394[10.00] 0.787[20.00] OUTPUT WIRE CONNECTIONS Color 22AWG Blue D+ 22AWG White D- (Optional) 16AWG Red +Vo 16AWG Black -Vo cui.com 1.575[40.00] For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 4 of 6 DERATING CURVES Temperature Derating Curve THD vs. Output Current 25% Safe operating area 60 50 40 20 -20 0 20 40 50 60 70 80 Ambient Temperature (°C) 100 60W 20% 9$& 0.90 THD 80 0.85 PF Output Power (W) Load (%) PF vs. Output Current 1.00 0.95 100 -40 Output Power Vs. Input Voltage 65W 55W 0.80 9$& 50W 90V AC 100VAC 1 15VAC 2 30VAC Input Voltage (AC) 277 VAC 305VA C 0.70 50% 10% 9$& 0.75 45W 9$& 15% 60% 70% 80% 90% 100% 5% 50% 60% 70% 80% 90% Output Current Output Current EFFICIENCY CURVES Efficiency vs. Output Current (PLDA60-1250-277D) Efficiency Efficiency 9 9 9 9 9 9 Output Current 9 Efficiency vs. Output Current (PLDA60-2500-277D) 9 9 9 9 9 9 Output Current Efficiency vs. Output Current (PLDA60-D625-277D) Efficiency Efficiency 9 9 9 Output Current 9 Efficiency vs. Output Current (PLDA60-D833-277D) 9 9 9 9 9 9 Output Current Efficiency vs. Output Current (PLDA60-D1250-277D) Efficiency Efficiency 9 Efficiency vs. Output Current (PLDA60-1666-277D) 9 9 Output Current 9 9 cui.com 9 Output Current 9 100% For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 5 of 6 APPLICATION NOTES 1. Dimming Dimming should be controlled from the dimming controller with DALI, PWM, 1~10 Vdc, or resistive. Set the DALI controller to “broadcast mode” when connecting to the LED driver, since it will not be addressed in production. +Vo (RED) ACL (BLACK) AC LED DRIVER -Vo (BLACK) D+/DA (BLUE) ACN (WHITE) D-/DA (WHITE) Dimming Controller 1~10 Vdc Dimming Voltage 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V (Open) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Potentiometer 1K 2K 3K 4K 5K 6K 7K 8K 9K 10K (Open) Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty Cycle 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (Open) Output Current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output Current Potentiometer Dimming PWM Dimming (@ 1kHz, 10V) Note: 1. All specifications are measured at Ta=25°C, 115/230 Vac input voltage, and full load unless otherwise specified. cui.com For more information, please visit the product page. CUI Inc │ SERIES: PLDA60 │ DESCRIPTION: LED DRIVER date 03/13/2015 page 6 of 6 REVISION HISTORY rev. description date 1.0 initial release 09/23/2014 1.01 updated datasheet 03/13/2015 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.