24V driveN, FTP-607 Series 3” high speed thermal printer FTP-637MCL401/601 n Overview The FTP-637 MCL Series are 24V driven high-speed printers with a ultra low profile auto cutter and long life. The FTP-637 MCL Series can be used for a variety of applications, such as POS terminals, ticket vending machines, label printers, banking terminals, and measurement and medical equipment. n HIGHLIGHTS • Ultra low profile Height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm • High speed printing It can print at 100/150 mm/s maximum by using Fujitsu's unique head drive control. FTP-637MCL401/601 • Auto Cutter Long life and high reliable guilotine with dedicated motor. • Easy paper setting Our lever platen release mechanism allows a wide paper route, so paper can be easily inserted. Conventional auto loading is also available. • Multifunctional die-cast frame Wide operating temperature range, long continuous printing, high ESD absorbtion and discharge of static electricity vibration and shock resistant. • RoHS compliant FTP-637DSL291 FTP-637MCL401/601 n Part numbers Part Number Easy Load Model with low profile cutter FTP-637MCL401 FTP-637MCL601 LSI for driving FTP-627CU301R Interface board for Mech/Cutter Cutter MCL401 FTP-637DSL291R Parallel (Centronics) /Serial (RS-232C) MCL601 FTP-637DSL603R (USB) Interface cables Parallel (Centronics) FTP-628Y202 Serial (RS232C) FTP-628Y302 USB FTP-629Y301 Logic FTP-629Y401 Head, motor FTP-629Y601 FTP-637DSL605R Serial (RS-232C) Power cables n SPECIFICATIONS Item Specifications Part number FTP-637MCL401/601 Printing method Thermal-line dot method Dot structure 576 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 72 mm Number of columns ANK 48 columns/line (maximum 12 x 24 dot font) Paper width 80 mm Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics) Printing Speed Character types MCL401 MCL601 Maximum 100mm/sec. (800 dot line/sec.) Maximum 150mm/sec. (1,200 dot line/sec.) Alphanumeric, kana: International characters: JIS Kanji (Kanji CG loaded board): 159 types 195 types about 6800 types 12 × 24 dots, (1.5 × 3.0 mm), 48 columns: ANK Character, dimensions (W×H), number of columns 24 × 24 dots, (3.0 × 3.0 mm), 24 columns: ANK 8 × 16 dots, (1.0 × 2.0 mm), 72 columns: ANK 16 × 16 dots, (2.0 × 2.0 mm), 36 columns: ANK FTP-637MCL401/601 n SPECIFICATIONS Item Specification Iterface Conforms to RS232C/Centronics Power supply Dimensions Weight Life For print head 24 VDC average current, 0.51A (1.17A peak) (print ratio: 12.5%, print speed 100mm/sec.) For motor 24 VDC ±5%, 1.1 A maximum For cutter 24 VDC ±5%, 1.4 A maximum For logic 5 VDC, 0.2 A maximum Mechanism with cutter 104.5 x 42.2 x 21.8 mm (WxDxH) Interface board DSL291 70 x 60 x 12 mm (WxDxH) DSL60x 95 x 70 x 12 mm (WxDxH) Mechanism with cutter Approximately 116g/124g Interface board Approximately 25g / 34g Head Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less). Cutter Operating environment Detection function MCL401 Abrasion resistance: paper traveling distance 50km MCL601 Abrasion resistance: paper feed length 100km. MCL401 500,000 cuts MCL601 1,000,000 cuts Platen 5,000 times (open/close) Operating temperature* 0ºC to +50ºC Operating humidity 20 to 85% RH (no condensation) Storage temperature -20ºC to +60ºC (paper not included) Storage humidity 5 to 95% RH (no condensation) Head temperature detection Detected by thermistor Paper out/mark detection Detected by photo-interruptor Platen release Detected by sliding switch Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper) Standard paper TF60KS-E (Nippon paper), FTP-020PU001 (58mm) PD150R (Oji paper) FTP-020PU701 (58mm) Medium life paper TF60KS-F1 (Nippon paper) FTP-020P0102 (58mm) PD170R (Oji paper) P220VBB-1 (Mitsubishi paper) Long life paper PD160R (Oji paper) AFP-235 (Mitsubishi paper) TP50KJ-R (Nippon paper) HA220AA (Nippon paper) *+5˚C to +40˚C printing density assurance rance. FTP-637MCL401/601 n FUNCTION OF INTERFACE BOARD Item Item 1. Test print function 8. Cutter trouble detect 2. Paper out detection 9. Motor power saving function 3. Paper near end detection 10. Mark detection function 4. Paten open detection 11. MCU operation abnormality detection 5. Thermal head temperature abnormality detection 12. Power ON/OFF sequence protection 6. Blow-out fuse detection 13. Motor over-current protection 7. Head voltage abnormality detection 14. Hardware timer n dimensions 1. Printer mechanism FTP-637MCL401/601 Center of paper 90.4 (42.2) 7.5 .6 13.9 (14.4 max.) 22.1 13.1 36.0 5.4 21.8 1.6 10.7 28.3 (29.3 max.) 27.7 Center of mechanism 103.2 / 104.5 55 degrees Unit: mm Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified). 2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is open. FTP-637MCL401/601 2. Interface board FTP-637DSL291R (70.0) 63.5 3.25 3.25 50.5 1.45 1.0 4.0 25.5 30 CN10 30 29 2 3-Ø3.2 CN6 6 CN2 3 17.5 13.5 1.2 2.25 3.25 53.5 42.0 FGØ3.2 CN7 3.25 8 1.25 34.5 1.6 7 49.5 3 (60.0) CN8 2 8 CN9 Note: all dimensions are nominal value () means just reference The mounting height is the max. Unit: mm FTP-637MCL401/601 nINTERFACE board ftp-637dsl601 Series Connectors on Control Board Name Functions Remarks Note CN1 +24V power supply connector Connection for +24V power supply CN2 - - CN3 USB I/F connector Connection for USB interface CN4 RS-232C Connection for serial interface CN5 Cutter connector Connection for paper cutter CN6 Operation panel connector Connection for operation panel *1 CN7 Near end sensor connector Connection for near end switch *2 CN8 - CN9 Logic power connector CN10 Head/motor connector Connection for +5V power Supply Connection for thermal head & paper feed motor 2-inch, 24 pin Note: *1: Option *2: Depends on specification FTP-637MCL401/601 1. Connector (FPC) specification (CN4) (1)Connector Mechanical unit side: FPC connector Remote side (housing site): 52610-3071 (made by Molex) (2) Pin assignment on the mechanical side No Signal I/O Contents — Photointerrupter (Cathode) 1 PH K 2 VSEN I Ground power supply for paper sensor 3 PH E O Photointerrupter (Emittor) 4 VH I Head drive power 5 VH I Head drive power 6 VH I Head drive power 7 DI I Data input 8 STB3 I Strobe 3 9 STB4 I Strobe 4 10 VDD I Logic Power 11 GN D — Head ground 12 GN D — Head ground 13 GN D — Head ground 14 GN D — Head drive power 15 GN D — Head drive power 16 GN D — Head drive power 17 TM O Thermistor 18 STB1 I Strobe 1 19 STB2 I Strobe 2 20 LA T I Data Latch 21 CL K I Clock 22 VH I Head drive power 23 VH I Head drive power 24 VH I Head drive power 25 SW — Platen open switch 26 SW — Platen open switch 27 MT/A I Motor excite signal A 28 MT/A I Motor excite signal A 29 MT/B I Motor excite signal B 30 MT/B I Motor excite signal B FTP-637MCL401/601 Sensor (Photointerruptor) Platen unit Thermal head Motor FPC Connect terminal: surface side Connector No 30, 29, .....................2,1 (FPC pin numbers) 2. Cutter (CN5) Connector on control circuit side: 52610-0871 Molex or equivalent No. Signal I/ O Contents No . Signal I/O Contents 1 VSEN I Paper sensor power 2 PHE O Photo interruptor (emittor) 3 PH K O Photo interruptor (cathode) 4 MT/A I Motor excite signal A 5 MT/A I Motor excite signal A 6 MT/B I Motor excite signal B 7 MT/B I Motor excite signal B 8 NC — Not connected Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/printers/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. August 8, 2007