24 V DRIVE, FTP-607 SERIES HIGH SPEED THERMAL PRINTER 3-INCH TYPE MECHANISM FTP-637MCL103 ■ OVERVIEW The FTP-607MCL Series thermal printer (driven by 24VDC) provides ultra-high speed printing (80mm/s) for 2-inch and 3inch wide paper. Our original platen removal mechanism allows easy paper loading and maintenance. The FTP-607 MCL series can be used for a variety of applications, such as POS/ECR, Kiosk terminals, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment. ■ HIGHLIGHTS • Compact size Height 15.5 mm, width 70.4 mm, depth 33.0 mm for the 2 inch model. The 3-inch product has a width of 92.4mm. • High speed printing It can print at 100 mm/s (800 dotlines/s) maximum by using Fujitsu's unique head drive control. • Easy loading mechanism (ELM) type Our unique platen removal mechanism improved paper loading and maintenance. • Multi-featuring diecast fame By application of multi-featuring diecast frame, continous print by function of heat-sink, high ESD stand by function of earth frame and shock/vibration stand by function of solid frame are valid. • High resolution printing 8 dots/mm of resolution printing is possible. 1 FTP-637MCL103 ■ PART NUMBERS Name Part Number Printer Mechanism 3 inch FTP-637MCL103 LSI FTP-627CU201 parallel FTP-637DCL218 serial FTP-637DSL238 Parallel (Centronics) FTP-628Y202 Serial (RS-232C) FTP-628Y302 Logic FTP-629Y401 Head motor FTP-629Y601 Interface Board Interface Cable Power Cable ■ SPECIFICATIONS Item Specifications Part number FTP-637MCL103 Printing method Thermal-sensitive line dot method Dot structure 576 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 72 mm Number of columns ANK 48 columns/line (max.12x 24 dot font) Paper width 80 mm+0 -1 Paper thickness 60 to 100 µ m (some paper in this range may not be used because of paper characteristics) Printing Speed Maximum 100mm/sec. (800 dot line/sec.) Alphanumeric, katakana: International and special characters: JIS Kanji (supported when Kanji CG is mounted): Character types Character, dimensions (H×W), number of columns (1.5 × 3.0mm) (3.0 × 3.0mm) (1.0 × 2.0 mm) (2.0 × 2.0 mm) 159 types 195 types about 6800 types 48 columns: ANK 28 columns: ANK, Kanji 72 columns: ANK 36 columns: ANK, Kanji 2 FTP-637MCL103 ■ SPECIFICATIONS Specification Item FTP-637MCL103 Interface Operating Voltage External dimensions Conforms to RS232C / Centronics For print head 24 VDC ±5%, 1.5 A average, 2.2 A peak (print ratio: 25%) For motor 24 VDC ±5%, 1 A maximum For logic 5 VDC ± 5%, 0.5 A maximum Printer mechanism 92.4 x 33.0 x 15.5 mm (WxDxH) Interface board 70 x 60 x 24 mm (WxDxH) Weight Approximately 52g Life Head Pulse resistance: 5x 108 pulses/dot (under our standard conditions). Abrasion resistance: paper traveling distance 50km (print ratio: 25% or less) Operating temperature 0˚ C to +50˚ C*1 Operating humidity 20 to 85% RH (no condensation) Storage temperature -20˚ C to +60˚ C (paper not included) Storage humidity 5 to 95% RH (no condensation) Head temperature detection Detected by thermistor Operating environment Detection function Paper out/mark detection Detected by photo-interrupter Platen release detection Recommended thermal sensitive paper Detected by slide switch FTP-030PU001(80mm) *1: printing density assurance range, operation is possible at -0˚C to +40˚C 3 FTP-637MCL103 ■ DIMENSIONS 1. Printer mechanism FTP-637MCL103 center of paper 87.8 80.0 35(paper end sensor) 10.7 F.T (14.1) FUJITSU 33 18.9 JAPAN 15.5 4.6 44.7 86.7 87.6±0.1 Unit: mm 2 Interface board 41.0 3.2 3.3 430 1 1 CN3 G ) (F 5 6. 42.0 30 CN6 6 3 1 CN2 8 16.0 21.8 1 3.3 29 1 CN1 CN7 3.3 2 CN5 1 4 60.0 53.5 2 CN8 1 17.5 35.5 51.0 63.5 70.0 3.3 Unit: mm 4 FTP-637MCL103 ■ CONNECTOR PIN ASSIGNMENT OF MECHANISM (FPC) 1. Thermal Head Part number : 52610-3090 Molex or equivalent FTP-637MCL103 PIN ASSIGNMENT No Signal I/O Contents — Photointerruptor (Cathode) 1 PHK 2 VSEN I Ground power supply for paper sensor 3 PHE O Photointerruptor (Emittor) 4 SW — Platen open switch 5 SW — Platen open switch 6 VH I 7 VH I 8 VH I 9 DI I Print data in 10 STB3 I Print enable 3 11 STB4 I Print enable 4 12 VDD I Power for logic 13 GND — 14 GND — 15 GND — 16 GND — 17 GND — 18 GND — 19 TM O Thermistor 20 STB1 I Print enable 1 21 STB2 I Print enable 2 22 LAT 23 CLK I 24 VH I 25 VH I 26 VH I 27 MT/A I 28 MT/A I 29 MT/B I 30 MT/B I Power supply for thermal head Ground power supply for thermal head Print data latch Clock Power supply for thermal head Stepping motor excitation signal 5 FTP-637MCL103 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] www.fcal.fujitsu.com © 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004. 6