SDP8106 Silicon Photodarlington FEATURES • Side-looking plastic package • 50¡ (nominal) acceptance angle • Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes INFRA-79.TIF DESCRIPTION The SDP8106 is an NPN silicon photodarlington molded in a side-looking black plastic package to minimize effect of visible ambient light. The chip is positioned to accept radiation through a plastic lens from the side of the package. OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.005(0.12) 2 plc decimals ±0.020(0.51) DIM_023.cdr 168 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8106 Silicon Photodarlington ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX ABSOLUTE MAXIMUM RATINGS UNITS TEST CONDITIONS SCHEMATIC (25¡C Free-Air Temperature unless otherwise noted) Collector-Emitter Voltage Emitter-Collector Voltage Power Dissipation Operating Temperature Range Storage Temperature Range Soldering Temperature (5 sec) 15 V 5V 100 mW [À] -40¡C to 85¡C -40¡C to 85¡C 240¡C Notes 1. Derate linearly from 25¡C free-air temperature at the rate of 0.78 mW/¡C. Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 169 SDP8106 Silicon Photodarlington SWITCHING TIME TEST CIRCUIT SWITCHING WAVEFORM cir_016.cdr Fig. 1 Responsivity vs Angular Displacement Fig. 2 gra_059.ds4 Non-Saturated Switching Time vs Load Resistance Reponse time - µs 100 10 -60 -45 -30 -15 0 +15 +30 +45 +60 10 100 1000 10000 Load resistance - Ohms Angular displacement - degrees Fig. 3 gra_049.ds4 1000 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Relative response cir_004.cdr Spectral Responsivity gra_050.ds4 Relative response 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 600 700 800 900 1000 1100 1200 Wavelength - nm All Performance Curves Show Typical Values 170 h Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SDP8106 Silicon Photodarlington Honeywell reserves the right to make changes in order to improve design and supply the best products possible. h 171