Fiber Optic Contacts FOHC ITT Cannon fiber optic contacts...a standard in the industry. We offer the most complete line of fiber optic contacts, engineered to fit today's MIL-Spec circular, rack and panel, edgecard/LRM, and D Subminiature connectors. • Conforms to MIL-T-29504 fiber optic termini. • Fits any size 16 cavity with no modification to connector. • Designed for use with standard size 16 contact insertion/extraction tool. • Both pin and socket contact end faces are easily cleaned. Fiber Optic Contact Performance Data Durability < 0.5 dB change after 500 matings Temperature Shock < 0.5 dB change during and after test Operating Temperature - 65˚C to + 200˚C (Cable/contact dependent) Vibration, random (16 hrs/MIL-C-38999) < 0.5 dB change during and after test Optical Loss Performance Typical 1.0 dB using 100/140 micron fiber-tested per EIA FOTP-34, Method A Standard MIL-Spec Connector Standard Connector MIL-C-38999 Series I Cannon Designator KJL Number of Size #16 Cavities Available Dependent Upon Shell Size KJA 1-29 MIL-C-26482 Series I KPSE 1-31 MIL-C-26482 Series II MIL-C-83723 Series I MIL-C-83723 Series III PV7 PVA HTMF 1-31 1-31 1-52 MIL-C-83733 DPK Up to 64 MIL-C-28840 KFS Up to 8 BKAD Up to 6 MIL-C-83527 BKW Pin (Body) MIL-T-29504/5 MIL-T-29504/4 MIL-T-29504/11 MIL-T-29504/10 MIL-T-29504/9 MIL-T-29504/8 MIL-T-29504/7 MIL-T-29504/6 1-29 MIL-C-38999 Series III MIL-C-38999 SeriesIV ARINC 600 Fiber Optic Contact Socket (Body) Up to 30 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 296 Fiber Optic Contacts FOHC Ceramic Tip Optical Contacts ITT Cannon's new precision optical contacts offer superior coupling performance and a simplified termination process. Ceramic zirconia tips more accurately center the fiber within the contact body. A rugged thermoplastic alignment sleeve precisely aligns the mating contacts. Solid state epoxy retained within the contact eliminates any handling of epoxy SOCKET BODY RETENTION SLEEVE CERAMIC TIP COMPRESSION SPRING RETAINING RING CERAMIC TIP RESILIENT ALIGNMENT SLEEVE CERAMIC TIP PIN BODY COMPRESSION SPRING CERAMIC TIP RETENTION SLEEVE PIN BODY SOCKET BODY CONNECTOR RETENTION CLIP RETAINING RING CONNECTOR RETENTION CLIP RESILIENT ALIGNMENT SLEEVE How to Order Fiber Opitc Hybrid Contacts FOHC - P A 1422 J P SERIES GENDER TERMINUS/CONNECTOR SERIES HOLE SIZE (1422 means 142.2 microns) ALIGNMENT SYSTEM PREFORM SERIES - Fiber Optic Hybrid Contacts GENDER P - Pin S - Socket TERMINUS/CONNECTOR SERIES A - MIL-C-29504/4 & /5: For use in MIL-C-38999 Series I, III & IV Connectors. B - MIL-T-29504/10 & /11: For use in MIL-C-83723 Series I, III; MIL-C-83733; and MIL-C-26482 Series II Connectors. C - MIL-C-29504/6 & 7; For use in MIL-C-83527; MIL-C-81659; ARINC 600; and ARINC 404 Connectors. D - (No Terminus Spec): For use in MIL-C-26482 Series I & MIL-C-26500 Connectors. E - (No Terminus Spec): For use in MIL-C-83723 Series II & MIL-C-5015G Connectors. F - MIL-C-29504/8 & /9: For use in MIL-C-28840 Connectors. G - (No Terminus Spec): For use in MIL-C-83723 Series III/82, /83, /86 & /87 Connectors. H - (No Terminus spec): For use in D*M Mark I, G06, E2P (DIN) Fiber Optic/Coaxial Housing. HOLE SIZE (MICRONS)* - JEWEL 1219 1321 1422 1650 2200 2400 2600 2800 1245 1346 1447 1700 2250 2450 2650 1270 1372 1550 1750 2300 2500 2700 1295 1397 1600 1800 2350 2550 2750 HOLE SIZE (MICRONS)* - CERAMIC TIP 1250 1400 1700 1270 1420 1720 1290 1440 1740 ALIGNMENT SYSTEM J - Jewel, Synthetic Ruby P - Precision Ceramic Tip PREFORM P - Preform Epoxy Supplied (available for terminus/connector series A, B and G only) N - No Preform Epoxy Supplied *For Size not listed, consult factory. How to Order Fiber Optic Receptacles (Mates with MIL-T-29504/4 Contacts) FOHC SERIES SHELL STYLE SEALING Adapter for in-line cable mechanical splice. - * - * SERIES - Fiber Optic Hybrid Contacts SHELL STYLE 3 - Receptacle, Device, PCB Mount 4 - Receptacle, Device, Flange Mount 7 - Receptacle, Adapter, In-Line Cable Panel Mount SEALING N - Non-Sealed S - Sealed Receptacle for mounting T0-18/T0-46/T0-52 devices. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 297 Fiber Optic Contacts FOHC Jewel Ferrule Alignment System Cannon's patented* optical contacts allow the FIBER OPTIC CABLE use of all standard fibers via the field-proven CLIP RETENTION SHOULDER jewel ferrule alignment system in a size 16 pin or socket contact. The jewel ferrule system OUTER SLEEVE provides precise alignment regardless of fiber size, accommodates fiber tolerances, SPRING GUIDE SLEEVE elim- SOCKET CONTACT ALIGNMENT JEWEL inates the requirement for a minimum end gap, and alloys for spring loading of contacts. SOCKET CONTACT ASSEMBLY PIN CONTACT SEALING GROMMET HARD DIELECTRIC SEALING GROMMET *U.S. Patent No 4,351,586, No. 3,947,182, and No. 4,747,658 INTERFACIAL SEAL Solid State Epoxy Since the advent of fiber optics, fibers have Pin been terminated in optical contacts using messy two-part liquid expoxy. This process is cumbersome and not conducive to high .290 (7.37) MAX. volume prodution. Optical contacts are now available with solid state epoxy. The fiber is inserted into .103 (2.62) DIA. the .600 (15.24) MAX. .310 (7.87) MAX. .033 (0.84) .0145 (0.37) DIA. MIN .0625 (1.59) DIA. contact and the epoxy is reflowed in a cure fixture. No mixing of liquids is required; the volume and flow viscosity is controlled, result- .087 (2.21) DIA. MIN. ing in a perfect bond and the elimination of SOLID STATE EPOXY .130 (3.30) DIA. clean-up. Socket .033 (0.84) .113 (2.87) DIA .054 (1.37) .087 (2.21) DIA. MIN. .103 (2.62) DIA .130 (3.30) DIA. .0625 (1.59) DIA. SOLID STATE EPOXY .652 (16.56) .0145 (0.37) MIN. DIA. .224 (5.69) MAX. .990 (25.15) MAX. Note: Dimensions are for 38999 contacts. Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 298