MCC TM Micro Commercial Components MBR30150FCT omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features 30 Amp • • • • x Schottky x x Low Power Loss, High Efficiency Guardring for overvoltage protection Low forward voltage drop High frequency operation For use in high frequency inverters, free wheeling and polarity protection applications Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Weight: 0.08 ounce, 2.24 grams Barrier Rectifier 150 Volts ITO-220AB B Maximum Ratings and Electrical Characteristics M C ( TC = 25oC unless otherwise noted ) Parameter Symbol MBR30150CT Unit Maximum repetitive peak reverse voltage VRRM 150 Volts Working peak reverse voltage VRWM 150 Volts VDC 150 Volts IF(AV) 30 15 Amps IFSM 260 Amps IRRM 1.0 Amp dv/dt 10,000 V/us Maximum DC blocking voltage Maximum average forward rectified current (See Fig. 1) L Total device Per leg Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Peak repetitive reverse current per leg at tp = 2.0us, 1KHz Voltage rate of change (rated VR) D A K PIN 1 2 3 E F O I G J N H H Maximum instantaneous forward voltage per leg (Note 4) at IF=15A, TC=25oC at IF=15A, TC=125oC Maximum reverse current per leg at working peak reverse voltage 0.99 at IF=30A, TC=125oC 0.86 TJ=25oC Volt 5.0 uA 1.0 mA RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1.0 second, RH < 30% RθJC MBR 1.7 / MBRF 4.0 VISOL 4500 (Note 1) 3500 (Note 2) 1500 (Note 3) TJ, TSTG -55 to +150 o C/W Volts o 1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset 2. Clip mounting (on case), where leads do overlap heatsink 3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19") 4. Pulse test: 300us pulse width, 1% duty cycle C PIN 2 PIN 3 IR TJ=125oC Operating junction and storage temperature range PIN 1 0.75 at IF=30A, TC=25oC Typical thermal resistance per leg Notes: 0.90 VF A B C D E F G H I J K L M N INCHES .580 .600 .383 .405 .105 .115 .248 .272 .171 .191 --.060 .530 .560 .095 .105 .027 .037 .014 .022 .122 .131 .172 .188 .100 .110 .100 .110 MM 14.50 9.72 2.45 6.30 4.35 --13.46 2.41 0.69 0.36 3.08 4.36 2.54 2.54 15.50 10.27 3.15 6.90 4.85 1.52 14.22 2.67 0.94 0.55 3.39 4.77 2.80 2.80 www.mccsemi.com Revision: 1 1 of 3 2007/06/21 MCC Micro Commercial Components MBR30150FCT RATINGS AND CHARACTERISTIC CURVES ( TA = 25oC unless otherwise noted ) Revision: 1 www.mccsemi.com 2 of 3 2007/06/21 TM MCC TM Micro Commercial Components ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 1 3 of 3 2007/06/21