MBR3035CT-MBR30150CT 30.0AMP. Schottky Barrier Rectifiers TO-220AB Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260 oC/10 seconds,0.25”(6.35mm)from case Mechanical Data Cases: JEDEC TO-220AB molded plastic Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 2.24 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBR MBR Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T C =130 o C Peak Repetitive Forward Current (Rated V R , Square Wave, 20KHz) at Tc=130 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) V RRM V RMS V DC 35 24 35 45 31 45 50 35 50 60 42 60 90 63 90 MBR MBR 30100 30150 CT CT 100 70 100 http://www.luguang.cn Units 150 105 150 V V V A A IFSM 200 1.0 IRRM 0.5 0.77 0.67 － － 0.7 0.6 0.82 0.73 0.2 15 0.2 10 1,000 460 dV/dt Cj R θJC TJ A 600 1.0 A 0.84 0.70 0.94 0.82 0.2 7.5 0.95 0.92 1.02 0.98 0.1 5.0 320 1.5 -65 to +150 -65 to +175 T STG 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg, with Heatsink size (4”x6”x0.25”) Al-Plate Storage Temperature Range Notes: MBR 3090 CT 30 IR Operating Junction Temperature Range MBR 3060 CT 30 Maximum Instantaneous Reverse Current @ Tc=25 oC at R ated DC Blocking Voltage Per Leg @ Tc=125 oC (Note 2) M aximum T hermal R esistance P er L eg (N ote 3) MBR 3050 CT IFRM VF Typical Junction Capacitance 3045 CT I(AV) Maximum Instantaneous Forward Voltage at (Note 2) IF =15A, Tc=25 oC IF =15A, Tc=125 oC IF =30A, Tc=25 oC IF =30A, Tc=125 oC Voltage Rate of Change, (Rated V R ) 3035 CT mail:[email protected] V mA mA V/uS pF o C/W o C o C MBR3035CT-MBR30150CT 30.0AMP. Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES (MBR3035CT THRU MBR30150CT) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG FIG.1- FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 30 RESISTIVE OR INDUCTIVE LOAD 24 18 12 6 200 150 100 50 0 0 50 100 o CASE TEMPERATURE. ( C) Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 250 0 150 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 50 INSTANTANEOUS REVERSE CURRENT. (mA) IF-INSTANTANEOUS FORWARD CURRENT. (A) 10 20 10 MBR3035CT & MBR3045CT 5.0 MBR3050CT & MBR3060CT 3.0 MBR30150CT MBR3090CT & MBR30100CT 1.0 Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C 0.001 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 MBR3035CT-MBR3045CT MBR3050CT & MBR30100CT 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 100 Tj=25 0C f=1.0MHz Vsig=50mVp-p 800 JUNCTION CAPACITANCE.(pF) TRANSIENT THERMAL IMPEDANCE. ( OC/W) 1000 600 400 200 100 50 0 0.1 MBR3035CT & MBR3045CT MBR3050CT & MBR3060CT MBR3090CT-MBR30150CT 1 10 REVERSE VOLTAGE. (V) http://www.luguang.cn 100 10.0 1 0.1 0.01 0.1 1 10 T, PULSE DURATION. (sec) mail:[email protected] 100