Micrel, Inc. 2:1 MULTIPLEXER FEATURES ■ ■ ■ ■ SY10EL58 SY100EL58 SY10EL58 SY100EL58 DESCRIPTION 230ps propagation delay High bandwidth output transitions Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package The SY10/100EL58 are 2:1 multiplexers. These devices are functionally equivalent to the E158 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than the E158, the EL58 is ideally suited for those applications which require the ultimate in AC performance. TRUTH TABLE SEL Data H a L b PIN NAMES Pin M9999-121205 [email protected] or (408) 955-1690 Function Da, Db Data Inputs Q Data Outputs SEL Select Input Rev.: G 1 Amendment: /0 Issue Date: December 2005 SY10EL58 SY100EL58 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) NC 1 Da 2 1 Db 3 MUX 0 SEL 4 Part Number Package Type Operating Range Package Marking Lead Finish SY10EL58ZC Z8-1 Commercial HEL58 Sn-Pb Z8-1 Commercial HEL58 Sn-Pb Z8-1 Commercial XEL58 Sn-Pb Z8-1 Commercial XEL58 Sn-Pb SY10EL58ZI Z8-1 Industrial HEL58 Sn-Pb SY10EL58ZITR(2) Z8-1 Industrial HEL58 Sn-Pb SY100EL58ZI Z8-1 Industrial XEL58 Sn-Pb SY100EL58ZITR(2) Z8-1 Industrial XEL58 Sn-Pb SY10EL58ZG(3) Z8-1 Industrial HEL58 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL58ZGTR(2, 3) Z8-1 Industrial HEL58 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL58ZG(3) Z8-1 Industrial XEL58 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL58ZGTR(2, 3) Z8-1 Industrial XEL58 with Pb-Free bar-line indicator Pb-Free NiPdAu 8 VCC 7 Q SY10EL58ZCTR(2) 6 Q SY100EL58ZC SY100EL58ZCTR(2) 5 VEE 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-121205 [email protected] or (408) 955-1690 2 SY10EL58 SY100EL58 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40°C Symbol IEE VEE IIH TA = 0°C TA = +25°C TA = +85˚C Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Power Supply Current 10EL 100EL — — 14 14 17 17 11 11 14 14 17 17 11 11 14 14 17 17 11 13 14 16 17 19 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 — 150 — — 150 — — 150 — — 150 mA Power Supply Voltage 10EL –4.75 100EL –4.20 Input HIGH Current Unit V — µA AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40°C Symbol TA = 0°C TA = +25°C TA = +85˚C Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tPD Propagation Delay to Output D 60 90 220 250 380 410 110 140 220 250 330 360 120 150 230 260 340 370 140 170 250 280 360 390 ps tr tf Output Rise/Fall Times Q (20% to 80%) 100 225 350 100 225 350 100 225 350 100 225 350 ps M9999-121205 [email protected] or (408) 955-1690 3 SY10EL58 SY100EL58 Micrel, Inc. 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX USA + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2005 Micrel, Incorporated. M9999-121205 [email protected] or (408) 955-1690 4