MOTOROLA SEMICONDUCTOR TECHNICAL DATA 2:1 Multiplexer MC10EL58 MC100EL58 The MC10EL/100EL58 is a 2:1 multiplexer. The device is functionally equivalent to the E158 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E158 the EL58 is ideally suited for those applications which require the ultimate in AC performance. • • • • 8 230ps Propagation Delay 1 High Bandwidth Output Transitions 75kΩ Internal Input Pulldown Resistors D SUFFIX PLASTIC SOIC PACKAGE CASE 751-05 >1000V ESD Protection LOGIC DIAGRAM AND PINOUT ASSIGNMENT FUNCTION TABLE NC 1 Da 8 2 1 VCC 7 Q 6 Q SEL Data H L a b MUX Db SEL 3 0 4 5 PIN DESCRIPTION VEE PIN FUNCTION D0, D1 Q Data Inputs Data Outputs DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) –40°C Symbol Characteristic IEE Power Supply Current 10EL 100EL VEE Power Supply Voltage 10EL 100EL IIH Input HIGH Current Min –4.94 –4.20 0°C Typ Max 14 14 17 17 –5.2 –4.5 –5.5 –5.5 Min –4.94 –4.20 25°C Typ Max 14 14 17 17 –5.2 –4.5 –5.5 –5.5 150 Min –4.75 –4.20 85°C Typ Max 14 14 17 17 –5.2 –4.5 –5.5 –5.5 150 Min –4.75 –4.20 Typ Max Unit 14 16 17 19 mA –5.2 –4.5 –5.5 –5.5 V 150 µA Unit 150 AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND) –40°C Symbol 0°C 25°C 85°C Characteristic Min Typ Max Min Typ Max Min Typ Max Min Typ Max tPLH tPHL Propagation Delay to Output D to Q SEL to Q 60 90 220 250 380 410 110 140 220 250 330 360 120 150 230 260 340 370 140 170 250 280 360 390 tr tf Output Rise/Fall Times Q (20% – 80%) 100 225 350 100 225 350 100 225 350 100 225 350 ps 12/93 Motorola, Inc. 1996 3–1 REV 2 ps MC10EL58 MC100EL58 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751–05 ISSUE P –A– M 1 4 R 0.25 (0.010) 4X –B– X 45 _ B M 5 P 8 NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. J M_ C F G –T– K SEATING PLANE 8X D 0.25 (0.010) M T B S A S DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315 MFAX: [email protected] – TOUCHTONE 602–244–6609 INTERNET: http://Design–NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 ◊ MOTOROLA 3–2 *MC10EL58/D* MC10EL58/D ECLinPS and ECLinPS Lite DL140 — Rev 3