ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller AQ Specifications Performance Characteristics Item Category Temperature Range –25 ~ +105°C Rated Voltage Range 200 • 220 • 400V Rated Capacitance Range 33 ~ 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I tan δ 0.20MAX. 120Hz, 20°C 3 CV ( µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C Stability at Low Temperature 200 • 220 8 400 8 Measurement frequency : 120Hz After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change Endurance After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change Shelf Life Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Rating Test conditions Limited DC current Test voltage Voltage (V) Rated Capacitance (µF) 4A 330 C < 330 5A 300VDC and 375VDC 200 330 C < 470 7A 470 C < 470 330 C < 330 4A 330 C < 470 220 5A 320VDC and 405VDC 470 C < 470 7A 330 C < 100 2A 400 100 C < 220 4A 500VDC and 600VDC 220 C < 470 7A Marking Printed with white color letter on black sleeve Drawing tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Within ±15% of initial value 150% or less of initial specified value Initial specified value or less Type numbering system (Example : 200V 680µF) Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L AQ 2D 6 8 1 ME L A 4 0 f D +1MAX. Bottom plate (code ZB only) tan δ Leakage current 10 L±2 Pressure relief vent 4.0±0.5 0.8 +0.2 -0.1 .2 +0 0.8 -0.1 4.0 ± 0.5 2.5 10±0.1 2-2 f ±0.1 (PC board hole dimensions) Configuration Capacitance tolerance (±20%) Rated Capacitance (680µF) Rated voltage (200V) Series name Type Case length code ZB Case dia. code code less fD Code 22 Z 25 A 30 B 35 C Bottom Plate With Bottom Plate Without Bottom Plate Please contact to us if other configurations are required. 1.5 +0.2 -0.1 (Terminal dimensions) Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS AQ series Dimensions V(Code) Cap.(µF) φD Cod e 0033 330 0039 390 0047 470 0056 560 0068 680 0082 820 0100 101 0120 121 0150 151 0180 181 0220 221 0270 271 0330 331 0390 391 0470 471 0560 561 0680 681 0820 821 1000 102 1200 122 1500 152 22 22 × 25 0.70 22 × 25 0.90 22 × 25 1.00 22 × 30 1.20 22 × 35 1.35 22 × 40 1.45 22 × 45 1.60 22 × 50 1.75 200V (2D) 25 30 35 22 × 20 0.50 22 × 25 0.60 22 × 25 0.65 22 × 25 0.70 22 × 30 0.90 22 × 35 1.00 22 × 40 1.20 22 × 45 1.35 25 × 20 0.70 25 × 25 1.20 25 × 30 1.35 25 × 30 1.45 25 × 35 1.60 25 × 40 1.75 25 × 50 2.11 22 30 × 25 1.45 30 × 30 1.60 30 × 30 1.75 30 × 35 2.11 30 × 45 2.40 30 × 50 2.65 35 × 25 1.75 35 × 30 2.11 35 × 35 2.40 35 × 40 2.65 35 × 45 3.08 220V (2P) 25 30 25 × 20 0.65 25 × 25 0.70 25 × 25 0.90 25 × 30 1.00 25 × 30 1.20 25 × 35 1.35 25 × 40 1.45 25 × 45 1.60 30 × 20 0.90 30 × 25 1.00 30 × 25 1.20 30 × 30 1.35 30 × 30 1.45 30 × 35 1.60 30 × 40 1.75 30 × 45 2.11 35 35 × 20 1.00 35 × 25 1.20 35 × 25 1.35 35 × 25 1.45 35 × 30 1.60 35 × 35 1.75 35 × 40 2.11 35 × 45 2.40 22 22 × 25 0.25 22 × 25 0.30 22 × 25 0.35 22 × 25 0.45 22 × 25 0.51 22 × 30 0.58 22 × 30 0.66 22 × 35 0.76 22 × 40 0.85 400V (2G) 25 30 25 × 25 0.58 25 × 25 0.66 25 × 30 0.76 25 × 35 0.85 25 × 40 0.95 25 × 45 1.24 30 × 25 0.76 30 × 25 0.85 30 × 30 0.95 30 × 35 1.24 30 × 40 1.30 30 × 45 1.47 35 35 × 25 0.95 35 × 30 1.24 35 × 35 1.30 35 × 35 1.47 35 × 40 1.59 35 × 45 1.87 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200 •220V Coefficient 400V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k~ 1.20 1.15 CAT.8100V