ALUMINUM ELECTROLYTIC CAPACITORS CA Miniature Sized, High Ripple Current, Long Life series High ripple current and Long Life product withstanding load life of 12000 hours(10000 hours for φD=10) at +105°C. Suited for ballast application. PB CA Long Life Smaller CS Specifications Item Performance Characteristics Category Temperature Range – 25 ~ +105°C Rated Voltage Range 160 ~ 450V Rated Capacitance Range 6.8 ~ 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 160 0.15 200 0.15 250 0.15 350 0.20 400 0.20 450 0.20 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature 160 3 Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 200 3 250 3 350 6 400 6 450 6 Endurance After an application of D.C. bias voltage plus the rated ripple current for 12000 hours (10000 hours for φD =10) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Type numbering system (Example : 250V 100µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 12 Sleeve (P.E.T.) d f P ± 0.5 D+0.5MAX. f U CA 2 E 1 0 1 M HD T Pressure relief vent L + 1.5MAX. 15 MIN 4 MIN (mm) D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 fd 0.6 0.6 0.8 0.8 f Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (100µF) Rated voltage (250V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS CA series Dimensions V 160 200 250 Code 2C 2D 2E 350 400 450 Cap. (µF) 6.8 10 22 33 47 68 100 150 220 2V 6R8 100 220 330 470 680 101 151 221 10 10 10 12.5 ´ 16 ´ 20 ´ 20 ´ 20 250 10 500 10 565 12.5 12.5 725 ´ 16 250 ´ 20 500 ´ 20 600 ´ 20 780 10 12.5 ´ 20 ´ 20 300 600 2G 10 ´ 16 220 10 ´ 20 280 12.5 ´ 20 350 2W 10 ´ 16 220 10 10 ´ 20 280 12.5 ´ 20 320 ´ 20 430 16 ´ 25 560 16 ´ 20 600 18 ´ 20 560 16 ´ 25 640 16 ´ 31.5 700 18 ´ 25 700 18 ´ 31.5 900 ´ 20 630 16 ´ 20 600 18 ´ 20 640 12.5 ´ 25 720 16 ´ 25 700 16 ´ 31.5 840 16 ´ 20 750 18 ´ 20 750 18 ´ 25 840 18 ´ 31.5 ´ 25 950 12.5 ´ 25 950 16 ´ 25 1000 16 ´ 31.5 16 ´ 20 970 16 ´ 20 970 18 ´ 20 920 18 ´ 25 16 ´ 25 1280 16 ´ 25 1280 16 ´ 31.5 1400 18 ´ 20 1180 18 ´ 20 1180 18 ´ 25 1345 16 ´ 31.5 1360 16 ´ 31.5 1360 ´ 25 ´ 31.5 1500 1360 18 ´ 25 18 18 1360 16 ´ 31.5 1400 ´ 25 18 ´ 31.5 1700 18 1400 1100 150 12.5 12.5 12.5 ´ 20 1000 875 Case size fD ´ L (mm) : Rated Ripple (mArms) at 105¡C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz ~ Coefficient 0.40 0.50 0.80 0.90 1.00 CAT.8100V