ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assurance series Load life of 20000 hours at 105°C. Adapted to the RoHS directive (2002/95/EC). PM Long Life Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current PX Performance Characteristitcs Ð55 ~ +105ûC 10 ~ 35V 1 ~ 4700µF ±20% (120Hz, 20ûC) After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 10 16 25 35 Measurement frequency : 120Hz Rated voltage (V) tan δ (MAX) 0.20 0.16 0.14 0.12 Temperature : 20ûC For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 10 16 25 35 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZÐ25ûC / Z+20ûC 3 2 2 2 (MAX.) ZÐ40ûC / Z+20ûC 4 4 4 4 tan δ After an application of D.C. bias voltage plus the rated ripple current for 20000 hours at 105ûC, the peak voltage shall not exceed the rated D.C. voltage, capacitor meet the characteristic requirements listed below. Capacitance change Within ±30% of initial value 300% or less of initial specified value tan δ Leakage current Initial specified value or less After storing the capacitors under no load at 105ûC for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20¡C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Endurance Shelf Life Marking Type numbering system (Example : 16V 220µF) Radial Lead Type Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 d U PX 1C 2 2 1 MPD Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (16V) Series name Type φ P ± 0.5 D+0.5MAX. φ Pressure relief vent L + 1.5MAX. D P φd φ 10 5.0 0.6 15 MIN 12.5 5.0 0.6 4 MIN 16 7.5 0.8 (mm) 18 7.5 0.8 Configuration Pb-free leadwire φD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PX series Dimensions V (Code) Item Cap. (mF) Code 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 1000 102 2200 222 3300 332 4700 472 10 (1A) Case size fD ´ L (mm) 16 (1C) Rated Ripple Case size fD ´ (mArms) 105ûC / 100kHz L (mm) 25 (1E) Rated Ripple (mArms) 105ûC / 100kHz Case size fD ´ L (mm) 35 (1V) Rated Ripple (mArms) 105ûC / 100kHz Case size fD ´ (mm) ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 20 12.5 ´ 25 16 ´ 25 16 ´ 31.5 18 ´ 40 10 ´ 16 10 ´ 20 12.5 ´ 20 16 ´ 25 18 ´ 35.5 18 ´ 40 10 ´ 16 ´ 20 12.5 ´ 25 16 ´ 31.5 18 ´ 35.5 18 ´ 40 10 504 10 672 1008 1680 2016 504 672 1008 1344 ´ 12.5 ´ 20 12.5 ´ 25 16 ´ 25 16 ´ 31.5 10 420 12.5 840 1008 1344 1680 L Rated Ripple (mArms) 105ûC / 100kHz 59 84 101 143 294 336 378 420 672 1008 1344 1680 2184 2016 2184 2184 Frequency coefficient of rated ripple current Frequency 120Hz 1kHz 10kHz 100kHz ~ Coefficient 0.75 0.8 0.9 1.0 CAT.8100V