ALUMINUM ELECTROLYTIC CAPACITORS CP High Voltage, Miniature sized, Long Life Assurance series High ripple current. Load life of 10000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU). CS Smaller CP Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 400 to 450V Rated Capacitance Range 27 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minutes' application of rated voltage at 20°C, leakage current is not more than I=0.04CV+100 (µA). Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 400 0.24 Rated voltage (V) tan δ (MAX.) 420 0.24 450 0.24 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio (MAX.) Z–25°C / Z+20°C 400 8 420 8 450 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 10000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 400V 220µF) Radial Lead Type φd 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 Size code P±0.5 φD±0.5 MAX. U CP 2 G 2 2 1 M HD T Configuration Capacitance tolerance (±20%) (mm) L+ 2.0 MAX. Pressure relief vent 15MIN 4MIN Rated capacitance (220µF) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Rated voltage (400V) φd 0.6 0.8 0.8 0.8 Series name Type • Please refer to page 20 about the end seal configuration. Configuration Dimensions 400 2G V Cap Code 27 33 47 56 68 82 100 270 330 470 560 680 820 101 120 121 420 W6 450 2W × 330 × 320 × × × × 470 540 620 710 × 460 × 800 × × × 690 780 800 920 890 1060 1200 150 151 180 181 × × × 220 221 × φD 10 Pb-free leadwire Pb-free PET sleeve 12.5 to 18 HD PD × 300 × × × × × × × 430 490 560 640 730 820 800 Frequency coefficient of rated ripple current Frequency 60Hz 120Hz 500Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.50 × 920 × 970 × 1040 × 1090 Rated ripple Case size φD × L (mm) Rated ripple current (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D