ALUMINUM ELECTROLYTIC CAPACITORS HN Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C Ultra Low Impedance series Lower impedance than HM series. Adapted to the RoHS directive (2002/95/EC). HZ Low Impedance HN Low Impedance HM Specifications ltem Performance Characteristics Sleeve : BLACK Ð 25 ~ +105ûC 6.3 ~ 16V 330 ~ 8200µF ±20% (120Hz, 20ûC) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) tan d 6.3 10 120Hz 20ûC 16 0.22 0.19 tan d (MAX.) 0.16 120Hz Rated voltage (V) 6.3 10 16 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) ZÑ25ûC / Z+20ûC 3 3 3 After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105ûC the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change Within ±30% of initial value tan d 200% or less of initial specified value Leakage current lnitial specified value or less Marking Printed with gold color on black sleeve. Category Temperature Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Radial Lead Type Type numbering system (Example : 6.3V 1800µF) 1 2 3 15MIN 4MIN fD P fd 8 3.5 0.6 (mm) 10 12.5 16 5 5 7.5 0.6 0.6 0.8 Configuration Pb-free leadwire fD Pb-free PET sleeve 8 á 10 PD 12.5 á 16 HD Standard ratings V (Code) 6.3 (0J) Impedance size Rated ripple Item Case C (m½) MAX. fD ´ L (mArms) Cap. (µF) ode 20ûC / 100kHz 105ûC / 100kHz (mm) 330 331 470 471 8 ´ 11.5 21 1300 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 3300 4700 5600 8200 9 10 11 12 Size code Configuration Capacitance tolerance (±20%) Rated capacitance (1800µF) Rated voltage (6.3V) Series name Type • Please refer to page 21 about the end seal configulation. 2700 6 7 8 P ± 0.5 fD+0.5 MAX. L+1.5MAX. Pressure relief vent 2200 4 5 UHN 0 J 1 8 2 MPD fd Sleeve (P.E.T.) 222 272 332 472 562 822 8 ´ 11.5 8 ´ 15 10 ´ 12.5 8 ´ 15 10 ´ 12.5 8 ´ 20 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 16 10 ´ 20 10 ´ 20 10 ´ 25 12.5 ´ 20 12.5 ´ 20 12.5 ´ 25 16 ´ 25 21 20 18 20 18 12 11 11 12 11 10 10 9 9 9 8 7 1300 1700 1760 1700 1760 2220 2280 2280 2220 2280 2900 2900 3190 3190 3190 3370 3610 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. 10 (1A) Impedance Rated ripple (m½) MAX. (mArms) 20ûC / 100kHz 105ûC / 100kHz 21 8 ´ 11.5 1300 Case size fD ´ L (mm) 8 ´ 11.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 16 8 ´ 20 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 20 10 ´ 25 12.5 ´ 20 12.5 ´ 20 12.5 ´ 25 12.5 ´ 25 16 ´ 25 21 18 18 18 11 12 11 11 12 1300 1760 1760 1760 2280 2220 2280 2280 2220 10 9 9 9 8 8 7 2900 3190 3190 3190 3370 3370 3610 16 (1C) Impedance Case size Rated ripple (m½) MAX. fD ´ L (mArms) 20ûC / 100kHz 105ûC / 100kHz (mm) 8 ´ 11.5 21 1300 8 ´ 11.5 21 1300 10 ´ 12.5 18 1760 10 ´ 12.5 8 ´ 20 10 ´ 16 10 ´ 16 10 ´ 16 8 ´ 20 10 ´ 20 10 ´ 20 18 12 11 11 11 12 10 10 1760 2220 2280 2280 2280 2220 2900 2900 10 ´ 20 10 2900 10 ´ 25 12.5 ´ 20 12.5 ´ 20 12.5 ´ 25 12.5 ´ 25 16 ´ 25 9 9 9 8 8 7 3190 3190 3190 3370 3370 3610 : In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system. CAT.8100V