ALUMINUM ELECTROLYTIC CAPACITORS KT For General Audio Equipment, Wide Temperature Range. series 105°C standard for audio equipment. Adapted to the RoHS directive (2002/95/EC). KT High Sound Quality VZ Specifications Performance Characteristics Item – 55 ~ +105°C 6.3 ~ 50V 0.1 ~ 10000µF Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance ± 20% at 120Hz, 20°C After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (µA) , whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Leakage Current 6.3 0.30 Rated voltage (V) tan δ (MAX.) tan δ 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz, 50 0.14 Temperature : 20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF Rated voltage (V) Z– 25°C / Z+20°C Z– 40°C / Z+20°C Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) 6.3 5 10 10 4 8 25 2 4 Capacitance change tan δ Leakage current After 1000 hours' application of rated voltage at 105°C, capacitors meet the characteristics requirement listed at right. Endurance 16 3 6 35 2 3 50 2 3 Measurement frequency : 120Hz Within ±20% of initial value 200% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 105°C tor 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with black color letter on purl blue sleeve. Shelf Life Marking Type numbering system (Example : 16V 1000µF) Radial Lead Type Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 d UKT 1C 1 0 2 MPD f P ± 0.5 D+0.5MAX. f L+1.5MAX. Pressure relief vent (f6.3up) 15MIN 4MIN (mm) D 5 6.3 8 10 12.5 (~25L) 12.5 (35.5L~) P 2.0 2.5 3.5 5.0 5.0 5.0 f 0.5 0.5 0.6 0.6 0.6 0.8 f Configuration • Please refer to page 21 about the end seal configulation. D 5 6.3 8 ¥ 10 12.5 f Pb-free leadwire Pb-free PET sleeve Configuration Capacitance tolerance (±20%) Rated Capacitance (1000µF) Rated voltage (16V) Series name Type DD ED PD HD Dimensions code 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 10 1A 6.3 0J V Cap.(µF) 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 12.5 × 35.5 12.5 × 40 45 55 65 95 160 195 270 420 710 910 1120 1360 1650 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 12.5 × 35.5 12.5 × 40 16 1C 45 58 68 105 175 240 280 500 810 1050 1300 1570 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 31.5 12.5 × 35.5 25 1E 35 54 65 79 115 190 265 315 560 920 1270 1480 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 31.5 12.5 × 35.5 35 1V 25 36 58 68 83 140 240 290 380 680 1200 1400 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 40 28 41 61 75 93 150 260 350 460 860 1260 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 12.5 × 31.5 1.3 2.9 4.3 7.0 13 20 25 30 46 68 90 115 190 300 410 530 1040 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Cap.(µF) Frequency ~ 47 100 ~ 470 1000 ~ 10000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 10kHz ~ 2.00 1.50 1.15 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V