ALUMINUM ELECTROLYTIC CAPACITORS RU 12.5mmL series RY 12.5mmL height. Adapted to the RoHS directive (2002/95/EC). High Temperature RU Specifications Item Performance Characteristics Category Temperature Range – 40 ~ + 85°C (6.3V ~ 400V), – 25 ~ + 85°C (450V) Rated Voltage Range 6.3 ~ 450V Rated Capacitance Range 6.8 ~ 6800µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated voltage (V) Leakage Current 6.3 ~ 100V 160 ~ 450V After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 1 minute's application of rated voltage, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. tan δ Rated voltage (V) Stability at Low Temperature Rated voltage ( V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 Measurement frequency : 120Hz, Temperature : 20°C 35 0.14 50 0.12 63 0.12 100 0.12 160 ~ 350 400 ~ 450 0.20 0.25 Measurement frequency : 120Hz 6.3 5 12 10 4 10 After 2000 hours' application of rated voltage at 85°C,capacitors meet the characteristic requirements listed at right. Endurance 16 3 8 25 2 5 50~ 100 160 ~ 200 250 ~ 350 2 3 4 3 4 8 35 2 4 400 6 10 450 15 Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Capacitance change tan δ Leakage current After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 2200µF) Radial Lead Type 1 φd 2 3 4 5 6 7 8 9 10 11 URU 1 A 2 2 2 M HD φD+0.5 MAX Sleeve (P.E.T.) P ± 0.5 Configuration Capacitance tolerance (±20%) Rated Capacitance (2200µF) Rated voltage (10V) Pressure relief vent Series name L+ MAX 15MIN 4MIN Type (mm) (φD < 20) 1.5 (φD 20) 2.0 φD P φd 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10 1.0 22 10 1.0 25 12.5 1.0 Configuration φD Pb-free leadwire Pb-free PET sleeve 12.5 ~ 18 HD 20 ~ 25 RD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS RU series Dimensions V Cap.(µF) 330 470 680 1000 2200 3300 4700 6800 6.3 0J Code 331 471 681 102 222 332 472 682 16 × 12.5 20 × 12.5 25 × 12.5 V Cap.(µF) 22 33 47 68 100 220 330 470 680 12.5 × 12.5 18 × 12.5 22 × 12.5 25 × 12.5 06.8 100. 220. 330. 470. Code 6R8 100 220 330 470 12.5 × 12.5 18 × 12.5 20 × 12.5 25 × 12.5 12.5 × 12.5 18 × 12.5 25 × 12.5 16 1C 870 1100 1480 490 710 900 1200 12.5 × 12.5 22 × 12.5 25 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 1200 1410 160 2C 330 620 760 400 2G 110 230 230 280 25 1E 20 × 12.5 25 × 12.5 100 2A 350 2V V Cap.(µF) 800 1460 1600 63 1J Code 220 330 470 680 101 221 331 471 681 10 1A 12.5 × 12.5 16 × 12.5 18 × 12.5 22 × 12.5 230 280 330 380 12.5 × 12.5 25 × 12.5 200 2D 12.5 × 12.5 16 × 12.5 18 × 12.5 22 × 12.5 25 × 12.5 35 1V 750 1380 190 230 280 330 380 12.5 × 12.5 18 × 12.5 250 2E 16 × 12.5 18 × 12.5 20 × 12.5 25 × 12.5 720 850 190 230 280 330 50 1H 12.5 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 530 600 750 930 Case size φ D × L (mm) Rated ripple 315 2F 16 × 12.5 20 × 12.5 25 × 12.5 190 230 280 450 110 230 280 2W 12.5 × 12.5 16 × 12.5 22 × 12.5 70 80 160 Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 450 Cap.(µF) Frequency 100 ~ 680 1000 ~ 6800 6.8 ~ 100 50Hz 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 300Hz 1.23 1.10 1.25 1 kHz 1.34 1.13 1.40 10 kHz ~ 1.50 1.15 1.60 CAT.8100V